Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze  (Read 16406191 times)

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #8640 on: November 11, 2011, 10:29:19 PM »
O boy..... Ganza you are really going offensive.

You know what it is?
Girl was "done" by one who said it to the world.. and than all over the place others say that they "did" her before...him.
So what........even if  it  would be true..
They should say  it before the lucky one...did..

At the end everyone will  be able  to see her beauty Lady OU  :)

You asking people to do not look at the same what we are presenting ,but exposing what you present...
Ganza it is the same LADY OU..

Who cares if there was Tesla  Who "DID her" for the first time .
heeee.... :)

You are the best prove to all of us that technology works  and we  can have access to her too... :)
Thank you Ganza for proving our work..
Aidas Arunas And Me have striped her without help of Tiger.. He was only present at 4th hour when she was already naked. Yes he told me that  He have seen her before,,,
At the modern time  Girl is not being punished for her  previous affairs :)
Tiger should strip her and show the way we did... heee.. :)


The more we move forward the more people will show up with their experience with Lady OU
I have had conversation with Romanow.. Yesterday..
Based on his words He stays that he has working OU  of TK but working witout ground wire so application for powering cars will be possible. 
And he will show as much as we show..
So if he really "did" her  He should respond to our agreement.
Conditions of Gentleman agreement:
If we Arunas Aidas and Wesley  have shown LADY OU but without self powering (she will eat but  only few watts of kilowatts out)
He  will show her eating the same but  in TK concept. or he is going  to be forgotten..
People do not care How it works, but the fact that it works..
He pointed that he has the same approach as we have ..
So prove it I said.
Approximate  time  for him to decide  yes or no  should be today... Did not happened..
I will give him little more time...

Now we will see  everyone who dated her successfully  or not.. Including TK.
I told him that he has no time left even if I understand that he is sick..and he is my friend..

Problem that I have is his friend who mostly  talk to me..and is trying to make sure that all of what I said  will work  for TK..

So my friends all over the world... That is what we need.. Push  everyone against the wall..
You want to give all of the details of that encounter for  free or we find out without  your participation..
how pleasurable it was.. :) .....

At the end I will have incredibly nice filling... We did it.. we started ... Soon maybe governments will come out with news that they "did her" too heeeee It would be hard for them to prove that they  did her before Tesla.....AND HIS PATENT PROTECTION HAS ALREADY  EXPIRED... :) or  his marriage contract
is no longer valid heeeee :)

So she is free to the world..

Wesley
 



« Last Edit: November 11, 2011, 11:00:26 PM by stivep »

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #8641 on: November 11, 2011, 10:37:25 PM »
Otherwise, can you imagine the number of readings you would require when pulsing not one frequency, but two or three sources. It would be totally hard to keep track of the meters, their numbers, milli and micro amps,  and all will just create continuous confusions and distract from the main goal.

...Also, my video 3 clearly was done to show only the FG on the Load Group and what the FG alone can do in terms of loaded output. This is my maximum no matter which way you look at it, technically, I should never be able to go above the Base Level no matter the coils or pulsing, etc.

I cannot.

Your faith in the immutable "Base Level" voltage can be easily disproved with a simple transformer driven by a waveform of the same frequency and amplitude but different Crest Factor (e.g. by varying the duty cycle of your signal generator).

A real power measurement setup is immune to frequency and waveform shape variations and would give you the same reading convenience as you have now.

For example with the circuit below you could still use your DMM and read it without confusion with the same convenience you do now:
http://www.eham.net/articles/1024


wattsup

  • Hero Member
  • *****
  • Posts: 2606
    • Spin Conveyance Theory - For a New Perspective...
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #8642 on: November 11, 2011, 10:37:55 PM »
@stivep

Dating Lady OU. Hmmmmmm. Now I have to take dancing lessons. lol

wattsup

Jdo300

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 682
    • The Magnetic 90 degree rule Theory
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #8643 on: November 11, 2011, 11:15:47 PM »
Hello Everyone,

Some preliminary test results to show. Finding the ferroresonant frequency of the core turned out to be much, much easier that I had originally anticipated (and I didn't even use a spectrum analyzer).

Before I begin I should mention that the tests were performed with two BK Precision 4010 signal generators and a 60Mhz HP54603B Oscilloscope.

I have attached scope shots of the waveforms that I observed while testing so everyone here can see what to look for (assuming that I'm getting the correct responses).

Before continuing on more, here's the data I recorded while following the tuning procedure outlined on Aidas' website (http://freeenergylt.narod2.ru/aidas/)

Steps 4-6
1.57 MHz (on 50-turn coil, 39V pk/pk)
(signal generator pulsing square wave on metal strip)

This step I believe was the most significant to me of all he testing I did so far. My concern was confusing the ferro-resonance with standard LC resonance of the coils. However, what I observed was that while sweeping the signal generator, the output signal shown on the scope was very noisy and harmonic-rich. As I continued up in the frequency range, the signal gave no indication of approaching any kind of LC resonance point (just from observing the waveforms), but once I hit the first major peak, the output waveform was a Triangle wave, not a sine wave (as shown in the scope shot). I never found any other peaks in the MHz range that gave me any sort of sine wave output with the observed amplitude.

Step 8
Bifilar output, 226.2 kHz 326V pk/pk
(signal generator pulsing square wave on 50-turn coil)

On approaching the resonant frequency for this coil, all the waveforms indicated that the coil was resonating at it's bulk LC resonant frequency.

Step 9
Bifilar output with 50Hz Sine wave input on 15-turn coil:
215.6 mV pk/pk

With the 50-turn coil's generator activated simultaneously, I saw the same HV sine wave output on the secondary. However, in my case, it appears as though when the 50Hz signal is applied there is only a slight (1-2%) reduction in the wave amplitude, but no significant modulation as shown in the original pictures by Wesley and company.

Again, check out the accompanying scope shots below.

I believe that I was not seeing a significant effect from the 50Hz coil because the signal generators I was using could not deliver the needed 2-5W to affect the ferrite core.

Also as a second note, I did not try any tuning capacitors or HV pulses on the circuit yet.

Before I proceed further, could Wesley/T-1000 please give me your feedback on these results. Are these the waveforms I should be seeing for tuning for the ferro-resonance?

Thank you,
Jason O

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #8644 on: November 11, 2011, 11:17:07 PM »

Quote
Itsu,

when I saw your video, I noticed that you measured with your probe across on of the coils ( 15 winding ? ) without load. Assuming a capacity of you probbe of 25 pf ( at least 10 pf ) you have created a parallell tank-circuit with the coil and there is a good chance that you are observing an artefact..
In order to rule this out you must put a load of about 1 MOhm across the coil and than hook a sniffer-coil on your probe. Then search for a point which is near the 15 winding coil and not in the direct field-emission-line of your sender coil.

Only then can you find out where that observed frequency is derived from.


Hi Kator01,

thanks for the comments.

I was probing the copper strip, not any of the coils.
The probe has a capacitance of 14-17pF.
I wanted to try your method, however, it is not doable.
My probe sniffer coil (2 turns) is not able to pickup anything usefull this way, only very high frequency noise.

I tried severall methods to probe this copperstrip, but it keeps coming back to a resonant point around 6 Mhz.

Regards Itsu

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #8645 on: November 11, 2011, 11:28:27 PM »
Steps 4-6
1.57 MHz (on 50-turn coil, 39V pk/pk)
(signal generator pulsing square wave on metal strip)

This step I believe was the most significant to me of all he testing I did so far. My concern was confusing the ferro-resonance with standard LC resonance of the coils. However, what I observed was that while sweeping the signal generator, the output signal shown on the scope was very noisy and harmonic-rich. As I continued up in the frequency range, the signal gave no indication of approaching any kind of LC resonance point (just from observing the waveforms), but once I hit the first major peak, the output waveform was a Triangle wave, not a sine wave (as shown in the scope shot). I never found any other peaks in the MHz range that gave me any sort of sine wave output with the observed amplitude.
There is no capacitors attached for tuning in beginning, you need to find natural resonant points :) The generator on copper plates and measurements on 15 turns coil.
If you still cannot get sine wave out, you need to change your copper plates width (increase most likely).

Step 8
Bifilar output, 226.2 kHz 326V pk/pk
(signal generator pulsing square wave on 50-turn coil)

On approaching the resonant frequency for this coil, all the waveforms indicated that the coil was resonating at it's bulk LC resonant frequency.
Again, still no capacitors, the output is measured from secondary coil. Before doing that you need to apply resonant frequency (in Steps 4-6) to copper plates and find out lower resonant harmonics on 50 turns coil with sinus out on secondary coil and maximum amplitude.

Step 9
Bifilar output with 50Hz Sine wave input on 15-turn coil:
215.6 mV pk/pk

With the 50-turn coil's generator activated simultaneously, I saw the same HV sine wave output on the secondary. However, in my case, it appears as though when the 50Hz signal is applied there is only a slight (1-2%) reduction in the wave amplitude, but no significant modulation as shown in the original pictures by Wesley and company.

Again, check out the accompanying scope shots below.

I believe that I was not seeing a significant effect from the 50Hz coil because the signal generators I was using could not deliver the needed 2-5W to affect the ferrite core.

Also as a second note, I did not try any tuning capacitors or HV pulses on the circuit yet.
Before applying 50Hz you need to put capacitor on copper plates and tune it to resonant LC frequency in Steps 4-6
Also, in our experiment it was 10V 0.25A. In your case, the sine wave seems is too weak, try to add amplifiers to signal generators.
« Last Edit: November 12, 2011, 12:17:11 AM by T-1000 »

grizli

  • Sr. Member
  • ****
  • Posts: 415
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #8646 on: November 12, 2011, 12:48:44 AM »


Before I proceed further, could Wesley/T-1000 please give me your feedback on these results. Are these the waveforms I should be seeing for tuning for the ferro-resonance?

Thank you,
Jason O

Got similar reulsts

50 hz kills the core :( and its own power source hehe)

Jimboot

  • Hero Member
  • *****
  • Posts: 1407
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #8647 on: November 12, 2011, 01:27:03 AM »
Question for people who are knowledgeable with AVS Video Editor

Any time I have AVI file the video quality  is  good.
but trimming and voice track recording  is being done  with AVS Video Editor

Immediately  after I load AVI to  AVS Video Editor I see from the screen that digits are not  in good quality.
After I finish work  I have choice of formats suitable for web posting.
Usually I chose best quality.. but apart of that I have DVD quality and many more.

Can someone help mi with that problem so the video I'm trying to post will have digits readable?

Maybe  making screen large will help but  AVS Video Editor does not have zoom option.
Anyhow  you look at brilliant quality  of some videos on YouTube and it looks like  every detail is possible to be shown
How  do they  make it?
Please   give me some  knowledge in this area.
If any other program is suggested to be used than I need ability to record additional voice track in English for English speaking audience


Kolega z Chicago moze ma wiecej  doswiadczenia  z tymi programami prosze o odpowiedz.



Wesley
HI Wesley,
If you are on Windows you may find Windows Movie Maker easier. It comes with windows. It is the compression that is your problem. Will it export to DV format? Try to keep the highest quality possible . Not DVD. Then upload. Even try exportimg to MPEG if possible with AVS.

Qwert

  • Hero Member
  • *****
  • Posts: 924
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #8648 on: November 12, 2011, 01:52:32 AM »
Can you guys tell me if is this device related to your research? Magnetic Resonance Amplifier: http://www.panaceauniversity.org/Magnetic%20Resonant%20Amplifier.pdf

philm

  • Newbie
  • *
  • Posts: 21
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #8649 on: November 12, 2011, 04:01:44 AM »
Hello everyone, I finally finished my windings today. I was able to put on the 50 turn and the 15 turn windings. The output stage I plan on doing this weekend (or at least starting it).

I also did some initial testing. I am fairly certain that I performed my test in the same manner Jdo300 performed his tests. I will be checking it over with him to make sure that I did everything right. I also used the same equipment as Jdo300. I did not take a picture of it but, I was actually able to get the waveform coming out of the 50 turn winding to actually have a peak to peak voltage higher then what the machine can handle given a 10x scope probe. From what it looked like, the highest peak to peak voltage that I got was around 400 V.

Here are some measurments of my device:

Copper Strip:
0.18 Ohms
8.0 uH

Primary 1:
45 turns +- 1 turn
22 AWG
0.463 Ohms
209 uH

Primary 2
22 AWG
15 Turns
0.205 Ohms
37.8 uH

P.S. If you would like to see the original pictures (without resizing), send me a pm, with an email address, and I will email the pictures to you as soon as I can.

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #8650 on: November 12, 2011, 05:41:52 AM »
@philm
Please measure the capacitance of your 2 copper strips when they are not connected together.
« Last Edit: November 12, 2011, 06:14:36 AM by verpies »

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #8651 on: November 12, 2011, 06:17:07 AM »
Got similar reulsts

50 hz kills the core :( and its own power source hehe)
Guys, I got struck by idea for solution I cannot sleep - add 1:1 transformer to the exit of 50Hz generator!!!

In our experiment we used low power transformer for 50Hz instead of generator and here is catch 22!

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #8652 on: November 12, 2011, 06:25:21 AM »
Guys, I got struck by idea for solution I cannot sleep - add 1:1 transformer to the exit of 50Hz generator!!!
In our experiment we used low power transformer for 50Hz instead of generator and here is catch 22!

What would be the difference between:
1) the 50Hz sine waveform provided by a transformer
2) the 50Hz sine waveform provided by a signal generator ?

Mannix

  • elite_member
  • Hero Member
  • ******
  • Posts: 564
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #8653 on: November 12, 2011, 06:58:39 AM »
@T1000

I think we all need to know the circuit you used to drive the 50 wind.

people are dragging up circuits from other devices and there is confusion.
We want to replicate.


Did you use mains frequency with low power transformer in your experiment?



There seems to be only 2 variables for tuning. Cap on output 150wind , and cap on copper strips.?

everything else seem to depend on the injected frequencies ..so we need the circuit diagram that worked for you that goes  between our signal generators and the coils.
Thanks in advance.

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #8654 on: November 12, 2011, 07:16:40 AM »
I think we all need to know the circuit you used to drive the 50 wind.
people are dragging up circuits from other devices and there is confusion.
We want to replicate.
We used functional generator PCGU1000 for tuning -  http://www.vellemanusa.com/products/view/?country=us&lang=enu&id=523616
Did you use mains frequency with low power transformer in your experiment?
Yes, that's where I realized difference between killing generator directly or short-circuiting low power mains transformer. You may use low power mains transformer to see if there is any difference.
There seems to be only 2 variables for tuning. Cap on output 150wind , and cap on copper strips.?
Yes, there is capacitor on copper plates for ferroresonant frequency LC circuit. The another capacitor is on secondary coil making tank LC circuit and the capacitance needs to be adjusted for each load at the moment (we noticed about bigger capacitance needed when using 150W bulb after 60W bulb)
Both capacitors are attached only after finding out frequencies for copper plates and 50 turns coils.
everything else seem to depend on the injected frequencies ..so we need the circuit diagram that worked for you that goes  between our signal generators and the coils.
Thanks in advance.
Will try to workout because it appear not so easy to find suppliers for each country and circuits need to be adopted to each country for local parts sources.