I do not understand what is closed ?

 open circuit..= coil U shape by itself.
close circuit=  parallel resonance circuit where variable capacitor is connected to two ends of that U shape coil.
Close means circuit tuned to  frequency of oscillation giving you  the best response  just by being there.
As resonance circuit  it will have EMF induced and circulated  in within the circuit.
Than this circuit EMF will have impact on the magnetic flux in the ferrite and rest of the circuitry.
1.When spark  is introduced than re-tuning will be required .
2.When spark  is not present than tuning will be the same as previously established.

When you deal with two coils of 90 degrees MF than you causing similar field that NMR is utilizing causing precession. Whenever you are able to move protons you are moving mass .
that might be  the secret of FE.

Please read this  PDF  !!
http://www.physics.rutgers.edu/ugrad/387/nmr.pdf

utilizing 50Hz look at configuration of coils.
This original device Createch Model 1020 (I have purchased it)was investigated by me in video
http://www.youtube.com/watch?v=F2BED9aDEYw

additional material can be found  below:

http://webcache.googleusercontent.com/search?q=cache:vg5rKqMRjT4J:www.teachspin.com/instruments/pulsed_NMR/the_instrument.shtml+CREATECH+NMR+Oscillator&cd=2&hl=en&ct=clnk&gl=us&source=www.google.com

http://www-keeler.ch.cam.ac.uk/lectures/Irvine/chapter3.pdf


http://www.phys.ufl.edu/REU/2009/reports/AntonioLorenzo.pdf

http://www.physics.usyd.edu.au/super/life_sciences/AN/AN6.pdf

http://webcache.googleusercontent.com/search?q=cache:FAcCmFYBZMsJ:www.magritek.com/terranova.html+magritek+terranova&cd=1&hl=en&ct=clnk&gl=us&source=www.google.com

http://www.magritek.com/manuals/rheomanual.pdf
http://www.magritek.com/brochures/prospa.pdf


http://www.sciencedirect.com/science/article/pii/002223649290162Z
http://www.drusch.com/download/gaussmeter.pdf

The current-induced motion of magnetic domain walls confined to nanostructures is of interest for applications in magnetoelectronic devices in which the domain wall serves as the logic gate or memory element. The injection of spin-polarized current below a threshold value through a domain wall confined to a pinning potential results in its precessional motion within the potential well. We show that by using a short train of current pulses, whose length and spacing are tuned to this precession frequency, the domain wall's oscillations can be resonantly amplified. This makes possible the motion of domain walls with much reduced currents, more than five times smaller than in the absence of resonant amplification.



The only difference between me and Arunas is  whether the phenomenon of OU is of scalar or NMR  nature.

At the end it is important that it works.. not how it  works to many of you.
But approach is different when  NMR is investigated as responsible one for  the effect of OU.
Everything takes time.
You have been waiting for OU  many years..
First successful video based on  TK was published month ago..
Second successful video with Yoke  ferrite was published  few days ago..
If you think that we know a lot you might be disappointed
Most of what  we knew is what you know  thanks to effort of the  group
Aidas
Arunas
Wesley NY

If it was  as easy as  some of you might of expect we would be perfecting OU  20 years ago when transistors and diodes become  very powerful. 




Wesley

ok plyz send corect text

It's done

Stivep, I consider to help you somehow. I'm speaking your native language (Polish) more fluently than English. I believe my English is better than yours. I have plenty of idle time, since not working (disability). The necessary data for contact, you will find clicking my profile name.
edit
and I'm visiting this thread everyday.

I know  about it  I have responded to your letter. Thank you my friend.

Wesley

Itsu,

when I saw your video, I noticed that you measured with your probe across on of the coils ( 15 winding ? ) without load. Assuming a capacity of you probbe of 25 pf ( at least 10 pf ) you have created a parallell tank-circuit with the coil and there is a good chance that you are observing an artefact..
In order to rule this out you must put a load of about 1 MOhm across the coil and than hook a sniffer-coil on your probe. Then search for a point which is near the 15 winding coil and not in the direct field-emission-line of your sender coil.

Only then can you find out where that observed frequency is derived from.

According to what I have researched about ferro-resonance and NMR we are not dealing here with one of these phaemonenas..... i must be somethin different.


Regards

Kator01

O boy. CosmoLV you are going radical.

For few dollars spend only , people are progressing..
But it looks like you want to stop them...
You do not want them to be ready with knowledge,tools,material, to easy start  any subject of OU.
Anything they do is for benefit of them.
Thousands of them will get TK secret   by inertia...
when finally any OU will be 100% repeatable they will be the first who would benefit from that.
UNDERSTOOD? 
Yes?
NO?
You do not know?
Maybe?



So what should they  do?
Read your comment and wait?
Do nothing?
I think that you might have  reason to make your comment.
Tell me
-WHO ARE YOU WORKING FOR.......?
Riga based company? is paying you for that? You know which one..I'm talking about
I know who you are. You live so close to "them."
30 000 euro? "lost in the drain"....
Do not press me to say more...!!! I was close to see God and  no longer  earth  for many reasons and you know why...
But God let me stay here and write to you CosmoLV. 

so let's say I'm no longer deadly sick  but I was ... (You know what they are manufacturing)
Wow direct competitor (For the People and by the People ) got out alive.. that must be  a shame...
 

-DO YOU KNOW THE TK SECRET?
-ARE YOU WILLING TO HELP US WITH IT?

Your comments are distraction in progress.
Please post something that is of progress and value..

Answer the questions please but do not do  what you usually do.. questioning questions is not the answer.


Wesley

I have spend much more than anyone of you ... I do not complain.
You think I'm rich?
No I'm not..

Seems to much stress you have boy.
Take it easy and understand me right, if you make something then say that it is not OU, because it is not!
i want true but not lies!

understand?
NOT?

if you something research and like to share with others, don't postulate it like (there it is!)
if you have something, tell that it is interesting – i like if somebody take hands on it for replication, but not postulate as fact of OU, because we both know that it is not OU.

Ordinary High frequency effect, illusion of OU.

and finally, i don't want to stop anything! I know how Tariel device working and i know how to build it, i just take on directions and i don't let you to foolish peoples!!

Understand or Not? Or you still think that you know everything?
Pleas, be human and bring light here and don't fool around!

And this is the best part

WHO ARE YOU WORKING FOR.......?
Riga based company? is paying you for that? You know which one..I'm talking about
I know who you are. You live so close to "them."
30 000 euro? "lost in the drain"....
Do not press me to say more...!!! I was close to see God and  no longer  earth  for many reasons and you know why...

I like to be hear more if you pleas, because i like to know more about them, i just hear something from Tariel and nothing more and these peoples (if we talking about the same ones) they threatened on me...

So welcome, and stop your stress in your age this is bad for you...

About my work:
i working in biggest TV company in Europe at MTG, Viasat, TV3 News
i have interest to bring Free Energy to life and i hard working for this over 5 years, and all my money i put in this project. So if you think i'm working for somebody who want stop Free Energy – You are far away from truth

and thanks to my work area i have idea how to bring Free Energy to public and i have lot of helpers from my work whu stand and fall for my idea and who supports me... so – so you don't know about me nothing!
this is the reason why no schematics from me – i just can give directions and thats all, like it you or not...!!!

And about these resonant high frequency coils – i call it like George Carlin say: "American Dream" Because you need to be a sleep to believe!!

Cosmo quotes:

" Understand or Not? Or you still think that you know everything?
Pleas, be human and bring light here and don't fool around! "


"...and thanks to my work area i have idea how to bring Free Energy to public and i have lot of helpers from my work whu stand and fall for my idea and who supports me... "

"...this is the reason why no schematics from me – i just can give directions and thats all, like it you or not...!!! "



I do not have the technical knowledge to discern what is what regarding these devices...and with that being said, together with Cosmo's words quoted above, it appears there are a number of replicators here who may require the 'direction' he stated that he could possibly supply. 

Cosmo, is this something you are willing to do for the replicators here if requested ?

Thanks

Regards...

They are selling a low cost flyback transformer at $1.99 each at this link....They LOOK like they can be separated from their diodes easily.  They also dropped their ultra perm sheets to $8.00 each now.   AND they have copper sheets if you need them to make your copper strips with.

http://www.goldmine-elec-products.com/prodinfo.asp?number=G17744&utm_source=Goldmine&utm_campaign=d9e269b539-Sept10&utm_medium=email

They take out every second plate to make them higher voltage able, I heard or saw these but it may have been on another forum on this subject.   DIY instructables have a DIY air tuning capacitor project and you can modify this design to hv by the proper spacing.
http://www.instructables.com/id/air-variable-capacitor-from-scrap-aluminum-sheets/

Thanks Hope.

Nice find...

DonL