Author Topic: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze (Read 16501836 times)

aether22 · « **Reply #8415 on:** November 07, 2011, 09:09:55 PM »

Quote from: escalator on November 07, 2011, 04:19:30 PM

Hi:

After reading again the last 20 pages of the thread I see that some people are asking how to sync the generators without any clear answer given. The Velleman generators used on the video have no sync input so I cant see a way to do it with those generators. All the screen captures shown are related to these generator models that work as standalone without sync capabilities. Someone can explain this?

My best shot at an explanation is that the device in the video has no sync (and given the huge disparity of frequencies none should be needed) but that when some asked if sync was a good idea or needed T-1000 thought it was and said yes.

But if that is so then does that mean T-1000 didn't use it but wants us to try so he doesn't have to (to see if it is worthwhile) or does it mean that he didn't actually build it (the vid is from another) and he is just guessing? (or a third option which I don't believe where it is a fake that he perhaps believes could be made too work buy having people try it)

BTW, I would guess that possibly the position of the bulb (over the yoke) might effect it's output.
This is just a theory based on my understanding of aether vortex fields also called torsion that suck in EM.

verpies · « **Reply #8416 on:** November 07, 2011, 09:15:01 PM »

Quote from: grizli on November 07, 2011, 08:51:45 PM

If we scope copper sheet coil alone: why we need to add capacitor to sheet coil in operation ?

BRF <> FRF
e.g.: 1.6MHz <> 382kHz
I already discussed this here:

Quote from: verpies on November 06, 2011, 12:19:25 PM

This winding (a shorted transmission line actually) will apparently resonate by itself.

I would expect that the Braid winding stimulated with a transient sharp rectangular pulse, would ring with a 1.6Mhz sinewave on the falling edge of that rectangular pulse, without any capacitors in parallel.
I like to call this ringing frequency - the Ferrite Resonant Frequency (FRF) although it is apparently the resonance of a shorted transmission line with a complex ferrimagnetic medium (with multitude of unconventional effects).

The capacitors in parallel with that Braid winding are there apparently to lower the FRF of 1.6MHz to the Braid Resonant Frequency (BRF) of 382kHz, making the BRF the 4th subharmonic of FRF.
( FRF / BRF = 4 )

Apparently resonating the Braid winding at the full FRF is impractical for some reasons.

Hope · « **Reply #8417 on:** November 07, 2011, 09:28:46 PM »

Quote from: bugler on November 07, 2011, 09:46:21 AM

Can any one post the information to replicate the device.

This thread is so long that I have no idea where the essential information can be.

Thanks.

All interested in build please start reading from page 500 for recent schematic diagrams and revisions.

Hope · « **Reply #8418 on:** November 07, 2011, 09:32:19 PM »

Quote from: Collapsingfield on November 07, 2011, 11:17:54 AM

@T1000
Thanks for the new detailed info. I don't understand how can you give 50Hz to 15 turn winding by the mentioned generator. At 50Hz its impedance is much lower than 50 Ohm, the USB based generator will not able to supply it with power. Another question is that there is no input on the USB generator, where are connected the mentioned 1 turn feedbacks? Thank You for your efforts again.

The PCGU1000 FG and the PCSU1000 Multi-Function O Scope ARE USB based BUT they have there OWN power supplies drawing from the AC outlet. They are NOT drawing power from your computer.

grizli · « **Reply #8419 on:** November 07, 2011, 09:40:18 PM »

Quote from: verpies on November 07, 2011, 09:15:01 PM

BRF <> FRF
e.g.: 1.6MHz <> 382kHz
I already discussed this here:

Ferroresonance freq = copper sheet coil resonance with capacitor !!

In other words we have to tune copper sheet coil capacitor so that what coil natural LC resonates to ferroresonance frequency, whish is higher harmonic to 380 khz, and equals 1,6 mhz (somerthing like that)
hmm

if we pulse copper sheet coil it will LC resonate , but if we pulse 50 turn coil it will make ferroresonance by higher harmonic of 380 khz (just guess value)
that ferroresonance I think has nothing to do with LC value of copper sheet coil
but we want to make LC copper sheet coil resonance to be equal as ferroresonance that is driven by higher harmonic of input 380 khz signal..

!!??

Hope · « **Reply #8420 on:** November 07, 2011, 09:45:41 PM »

Quote from: Mannix on November 07, 2011, 12:50:21 PM

I think that when we eventually get it working properly it must act as an amplifer to the input signal 50 hz .

On that video showing a yoke core coil powered by a 1.5 volt battery he got the output to 450 volts when he tapped it with a stack of small bar neos magnets. This perhaps suggests we are doing the same with our FG's.
The most interesting effect was that it stayed ringing at that voltage without any other components or inputs other that the one cell (D cell) staying attached. I believe it was Wattsup's video. He tapped it at the area between the windings and had an equal stack of magnets attached 180 degrees from where he tapped. (Tapped = touched briefly)

Hope · « **Reply #8421 on:** November 07, 2011, 09:53:35 PM »

Quote from: energia9 on November 07, 2011, 02:02:17 PM

i have experimented, things are happening the exact way aidas, arunas, wesley say, no theories will make your device work! DO IT and you will know!!!
everything has to be adjusted piece by piece, you will not suceed with a fixed thing....

trust it, the phenomenon is not explained in conventional science, and media will still try to supress it although it can be reached by anyone this time.
All physics books needs either adding more info or completely rewriting...

Excellant news, please post all data you can to include photos, schematics, equipment used, all P ins and P outs, waveforms at Pin/Pout's . Do you have any precision 1 ohm resistors you can measure across? Do you have any wattmeters or amp meters. You can build a high voltage probe, look at instructables.com for DIY instructions. You can get a mega ohm resistor heavy enough from an old broken tv (the picture tube will work as a fantastic HV capacitor BE CAREFUL). The bleed off resistor for the CRT (picture tube) at the ground straps area will work for a DIY HV probe, be SURE to incase it in materials that will protect you from getting ZAPPED!

Still awaiting my PCSU1000.

verpies · « **Reply #8422 on:** November 07, 2011, 11:13:12 PM »

@grizli

In Wesley's device - what do you think is the resonance frequency of the Transverse Coil (the 1turn copper plate coil) without an additional capacitor in parallel? 1.6MHz or 382kHz ?

I think it is more appropriate to treat the Transverse Coil as a Transmission Line shorted at one end. It has its own capacitance (L) and inductance (L) but I bet its natural resonance frequency is not equal to a lumped LC circuit's 1/(LC)^0.5.

A conventional 125 meter long transmission line shorted at one and (without additional capacitors at the input) will resonate at 1.6Mhz.
In the Wesley's device Transmission Line is ~1000x shorter but it has very unusual medium as its core, with 3 simultaneous perpendicular E&H field vectors.

Rafa12 · « **Reply #8423 on:** November 07, 2011, 11:28:45 PM »

Beautiful cores guys,

I am still trying to find a good configuration for this part (in blue). Anybody has build it correctly? Tiger, do you have a picture showing this detail.

all the best,

Mannix · « **Reply #8424 on:** November 07, 2011, 11:37:25 PM »

Quote from: energia9 on November 07, 2011, 02:02:17 PM

i have experimented, things are happening the exact way aidas, arunas, wesley say, no theories will make your device work! DO IT and you will know!!!
everything has to be adjusted piece by piece, you will not suceed with a fixed thing....

trust it, the phenomenon is not explained in conventional science, and media will still try to supress it although it can be reached by anyone this time.
All physics books needs either adding more info or completely rewriting...

Congratulations!!! You must be in a very different frame of mind . When you cool down a little there are 2 things I want to ask to join you sooner rather that a bit later .
Your sync circuit ?(just a rough description)
The ferro res cap?

grizli · « **Reply #8425 on:** November 07, 2011, 11:37:56 PM »

Quote from: verpies on November 07, 2011, 11:13:12 PM

@grizli

In Wesley's device - what do you think is the resonance frequency of the Transverse Coil (the 1turn copper plate coil) without an additional capacitor in parallel? 1.6MHz or 382kHz ?

I think it is more appropriate to treat the Transverse Coil as a Transmission Line shorted at one end. It has its own capacitance (L) and inductance (L) but I bet its natural resonance frequency is not equal to a lumped LC circuit's 1/(LC)^0.5.

A conventional 125 meter long transmission line shorted at one and (without additional capacitors at the input) will resonate at 1.6Mhz.
In the Wesley's device Transmission Line is ~1000x shorter but it has very unusual medium as its core, with 3 simultaneous perpendicular E&H field vectors.

in Wesley device there is NO circuit RESONANCE when he measures using network analyser, there is just ferroresonce, natural 90 degree coil resonance is at much much higher frequency, remember its just single turn , So we need to add cap that natural LC 90 degree coilresonance equals ferroresonance (whish is property of ferrous material)

Quote

I think it is more appropriate to treat the Transverse Coil as a Transmission Line shorted at one end. It has its own capacitance (L) and inductance (L) but I bet its natural resonance frequency is not equal to a lumped LC circuit's 1/(LC)^0.5

it does not matter, just I am sure that natural 90 degree coil without added cap resonates at much higher frequency,.. adding cap makes it resonate at lower

if we would network spectrum analyse whoe spectrum there could be another peak that equals fnatural Lc resonance

http://freeenergylt.narod2.ru/aidas/1_spectr_analiz_ferit.jpg

See hoe ferroresonace is SHARP, such sharpness has nothing to do with second order LC,

forest · « **Reply #8426 on:** November 07, 2011, 11:38:57 PM »

Quote from: verpies on November 07, 2011, 11:13:12 PM

@grizli

In Wesley's device - what do you think is the resonance frequency of the Transverse Coil (the 1turn copper plate coil) without an additional capacitor in parallel? 1.6MHz or 382kHz ?

I think it is more appropriate to treat the Transverse Coil as a Transmission Line shorted at one end. It has its own capacitance (L) and inductance (L) but I bet its natural resonance frequency is not equal to a lumped LC circuit's 1/(LC)^0.5.

A conventional 125 meter long transmission line shorted at one and (without additional capacitors at the input) will resonate at 1.6Mhz.
In the Wesley's device Transmission Line is ~1000x shorter but it has very unusual medium as its core, with 3 simultaneous perpendicular E&H field vectors.

Good progress sir !

I think as soon as you eliminate copper braid from the picture you will see it is antenna.

forest · « **Reply #8427 on:** November 07, 2011, 11:41:31 PM »

Controlling magnetic flux field by radio waves at 90 degrees. Efficiently at peak of sinewave wave."Nothing is SOMETHING"

grizli · « **Reply #8428 on:** November 07, 2011, 11:52:30 PM »

Quote from: forest on November 07, 2011, 11:41:31 PM

Controlling magnetic flux field by radio waves at 90 degrees. Efficiently at peak of sinewave wave."Nothing is SOMETHING"

there where is ferroresonance in whole story ?

cosmoLV · « **Reply #8429 on:** November 08, 2011, 12:23:28 AM »

How i understand and see stevep and others push peoples far away back from real principle of the device! Very clever and you are still believe....

Why you not take for real what Tariel say? why nobody see at linde's device which Tariel shows at end of green box video? why nobody look at electricity as water and gas?

where are engineering - Kindergarten!!! Return to earth and think with your own head...!!!

I'm Disappointed

________

News:

User Menu

Author Topic: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze (Read 16501836 times)

aether22

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

verpies

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

Hope

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

Hope

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

grizli

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

Hope

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

Hope

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

verpies

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

Rafa12

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

Mannix

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

grizli

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

forest

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

forest

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

grizli

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

cosmoLV

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze