Author Topic: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze (Read 16506910 times)

core · « **Reply #5580 on:** February 09, 2011, 06:15:42 AM »

Quote from: Magluvin on February 09, 2011, 03:25:37 AM

And if it is that you get more with shorter switch close/open it could be that if the power is on longer the field could be weaker from heat in the coil.

I'm not so sure about that, this is DC and if the current is consistent magnetic field strength should not change. I can not see there being an issue with excess heat as the contact is made for a fraction of a second if not less.

Quote from: Magluvin on February 09, 2011, 03:25:37 AM

Otherwise, I would say that the longer you stay on the switch the more chance that the filed build will get all the way.

That was my reasoning also but that appears to be completely false.

Respectfully,

Core

core · « **Reply #5581 on:** February 09, 2011, 06:19:55 AM »

Quote from: penno64 on February 09, 2011, 03:21:14 AM

@core

For a long time now, I cannot get this guys videos 1 & 2 out of my head.

Unfortunately, I do not have the type of capacitor he shows in the demo.

So I can not replicate.

I keep thinking that the earth is a massive capacitance.

What you allude to is what I think this guy has done.

Wouldn't it be funny if the holy grail turns out to be simply the capacitor.

http://www.youtube.com/user/NRGFromTheVacuum#p/u/10/2cUS03yNl40

Penno

Thanks for the link Penno. I don't think its funny at all in TK's patent he show's what he calls 'Points' feeding a HV module. Also HV does not have to be a value over 1000 volts. As an example 110 volts is considered high voltage.

Respectfully,

Core

core · « **Reply #5582 on:** February 09, 2011, 06:23:10 AM »

Quote from: quarktoo on February 09, 2011, 03:35:56 AM

Maybe when you have one of those "ah ha moments", you should start your own thread called "Look everybody - I wrapped some speaker wire on a sewer pipe".

This thread is about Kapanadzi, not your first coil made using the wrong wire, a form that is too thick and some idea that has nothing to do with Kapanadzi.

That's actually funny and I laughed for awhile. Maybe speaker wire and sewer pipe is the 'Pink elephant in the room'.

Respectfully,

Core

BTW - I forgot you where also TheBuzz my bad.

core · « **Reply #5583 on:** February 09, 2011, 06:31:08 AM »

Quote from: Magluvin on February 09, 2011, 04:44:56 AM

Hmm so maybe small cap HV on a rotary switch would not be so bad on the contacts. Core, were you running the 80uf cap on the failed rotary switch? Maybe that was the cause. Welding. ;]

Mags

Yes the rotary gap goes between points A & B on the print. My electrodes on the rotary fouled fairly quick. I'm going to try a better design. On one of TK's video's you can here a 'clanking' sound. I believe this is his mechanical break.

Respectfully,

Core

core · « **Reply #5584 on:** February 09, 2011, 06:36:33 AM »

Quote from: quarktoo on February 09, 2011, 05:06:03 AM

Within the last 25 pages of this thread, Kapanadzi's big secret was disclosed. It was just a thought and obvious to anyone with two eyes. The metal rod through the center just holds the two sections all together.

See what happens when you piss me off? I share more thoughts. That would be counter productive in your line of work. The offer still stands. Tell your evil overlords for 100K, I will stop disclosing OU info. It went back up to original offer when I reversed engineered Kapanadzi. That one is so simple a child could build it. So similar to the AH coil it hurts to keep it inside.

Your joking right?

Respectfully,

Core

dllabarre · « **Reply #5585 on:** February 09, 2011, 07:01:11 AM »

Quote from: core on February 09, 2011, 02:26:37 AM

At power up the capacitor is charged to 150 volts, depending how fast I short points A and B I can raise the charge to 220 volts. One question I have is 'Why does the sudden disruption across the cap. raise the voltage so much higher?' I'm guessing it has to do with the rapid creation then collapsing of the magnetic field in the inductor. Another question is 'Why does the speed of disruption between points 'A' and 'B' vary the voltage widely'?

Respectfully,

Core

NICE!

Whats the value/size of the other capacitor near the FWBR?

Thank you
DonL

Magluvin · « **Reply #5586 on:** February 09, 2011, 07:02:41 AM »

Quote from: core on February 09, 2011, 06:31:08 AM

Yes the rotary gap goes between points A & B on the print. My electrodes on the rotary fouled fairly quick. I'm going to try a better design. On one of TK's video's you can here a 'clanking' sound. I believe this is his mechanical break.

Respectfully,

Core

Hey core

I understood it. I had suggested trying like a smaller cap. Say 1uf or smaller. It will cause less damage to the rotor contacts. If you have a smaller value cap that is lets say 1kv 1uf you will get a higher voltage to your cap. I found that when I used a 1 uf at 200v, I could also get about the same discharge results as a .5uf at 400v. imagine .05uf at 4kv. same dooda. But 80uf at 300 v will burn those contact bad. Thats what got me thinkin above that the rotary switch should handle HV from a small cap better than the situation you had. ;]

Mags

Magluvin · « **Reply #5587 on:** February 09, 2011, 07:10:05 AM »

core

What is your diode rated at voltage wise and amps? Maybe when you hold the wire on to long, 2 things could be happening

1 current in the diode 2 high and causes less current when over heated
2 maybe the voltage produced is too high for the diode to hold back

Just ideas. I dont see why it is less when longer.

Mags

alstream · « **Reply #5588 on:** February 09, 2011, 07:15:18 AM »

Quote from: iceweller on February 08, 2011, 09:25:01 PM

What does this mean exactly? What is this myth of "Cold" electricity again?

"In my opinion the cold electricity phenomenon has something to do with the fact that Tesla was dealing not just with high voltage but high frequency. At high frequencies electricity tends to travel only along the surface of the conductor. That is why Tesla could allow his coils to pass electricty through his body and the electricity would radiate from his skin but not harm his internal organs. There are actually many wonderful therapuetic devices based on this effect using a tesla coil. Now if we have electricity with a frequency high enough, it could be changing directions almost once every planck second. At this level of rapid frequency so-called quantum mechanics may start to come into play to where it appears that instead of changing direction very rapidly the electricity is actually travelling in both directions simultaneously! In my opinion this is what cold electricity is. It is two simultaneously electric currents which are travelling in opposite directions in the same conductor. The two currents spiral and twist so as to avoid running into eachother. Therefore the resistance of one current cancels out the resistance of the other and that is why you have no heating of the conductor. Of course I could be wrong, but that is my guess."

exnihiloest · « **Reply #5589 on:** February 09, 2011, 09:05:40 AM »

Quote from: alstream on February 09, 2011, 07:15:18 AM

...
Now if we have electricity with a frequency high enough, it could be changing directions almost once every planck second.
...

Certainly not. Suppose a frequency of 1 Ghz, which is much more than Tesla's frequencies. Even at 1 Ghz (period = 10^-9 s), there would be 10³⁴ elementary Planck "seconds" in only one period of the HF signal (Planck time = 5*10^-44 s).
Even at gamma highest frequencies, which are the highest known frequencies (around 100 Exahertz=10²⁰ Hz), one period corresponds to 10²⁴ Planck times.
As the planck time is the shortest time interval, i.e the minimal possible unit of measure of time, it is obvious that no timed event can take place inside. At this scale, every thing if frozen.

quarktoo · « **Reply #5590 on:** February 09, 2011, 09:40:37 AM »

Quote from: exnihiloest on February 09, 2011, 09:05:40 AM

Certainly not. Suppose a frequency of 1 Ghz, which is much more than Tesla's frequencies. Even at 1 Ghz (period = 10^-9 s), there would be 10³⁴ elementary Planck "seconds" in only one period of the HF signal (Planck time = 5*10^-44 s).
Even at gamma highest frequencies, which are the highest known frequencies (around 100 Exahertz=10²⁰ Hz), one period corresponds to 10²⁴ Planck times.
As the planck time is the shortest time interval, i.e the minimal possible unit of measure of time, it is obvious that no timed event can take place inside. At this scale, every thing if frozen.

The math doesn't lie but liars do math.

Me thinks what you are regurgitating from college is wrong on several levels. A plank length is a non relativistic metric obtained through some creative math - I.e., renormalization by some quantum mechanics using vector geometry. Just because it is the smallest metric we have or use, which we can't even verify, does not mean that is the smallest known distance.

Since we can only account for 4% of the light in the universe, that is you first clue that the speed of light is only constant in a vacuum IN A LAB. We have known for a hell of a long time that a charged quadrapole significantly slows down the speed of light and the universe is filled with them. That would make the universe not quite as large as once thought. They would change that part of the monkey see monkey do academics but imagine the paperwork involved when they have to toss a mountain of accepted science based on flaws.

They say the universe is round because their telescopes see the same distance in all directions. Using that logic, the Catholic church was right and the Earth is the center on the universe. Not likely.

Since you are smarter than your average bear wrapping wire on sewer pipe in the wrong thread and haven't pissed me off lately, here is a link to someone that actually forms his own thoughts - rare in this religion called science. I think you will find that two enjoyable and well spent hours. He has several short 1 hour lectures on youtube.

http://www.youtube.com/watch?v=0Y5bXdx5UrE&feature=player_embedded

http://www.youtube.com/watch?v=Xmzi9eaVuxo&feature=player_embedded

alstream · « **Reply #5591 on:** February 09, 2011, 09:50:30 AM »

Quote from: quarktoo on February 09, 2011, 09:40:37 AM

The math doesn't lie but liars do math.

Me thinks what you are regurgitating from college is wrong on several levels. A plank length is a non relativistic metric obtained through some creative math - I.e., renormalization by some quantum mechanics using vector geometry. Just because it is the smallest metric we have or use, which we can't even verify, does not mean that is the smallest known distance.

Since we can only account for 4% of the light in the universe, that is you first clue that the speed of light is only constant in a vacuum IN A LAB. We have known for a hell of a long time that a charged quadrapole significantly slows down the speed of light and the universe is filled with them. That would make the universe not quite as large as once thought. They would change that part of the monkey see monkey do academics but imagine the paperwork involved when they have to toss a mountain of accepted science based on flaws.

They say the universe is round because their telescopes see the same distance in all directions. Using that logic, the Catholic church was right and the Earth is the center on the universe. Not likely.

Since you are smarter than your average bear wrapping wire on sewer pipe in the wrong thread and haven't pissed me off lately, here is a link to someone that actually forms his own thoughts - rare in this religion called science. I think you will find that two enjoyable and well spent hours. He has several short 1 hour lectures on youtube.

http://www.youtube.com/watch?v=0Y5bXdx5UrE&feature=player_embedded

http://www.youtube.com/watch?v=Xmzi9eaVuxo&feature=player_embedded

You have answered instead of me

quarktoo · « **Reply #5592 on:** February 09, 2011, 09:59:27 AM »

Quote from: core on February 09, 2011, 06:36:33 AM

Your joking right?

Respectfully,

Core

I never joke about money, sharks, bears or radiation. Never!

... or were you meaning the Kapanadzi disclosure? No I disclosed that dozens of times and even disclosed the exact part he used to do it with on his coil.

LtBolo mentioned that the coil would emit xray at something 10 ^6 if memory serves me right. (probably not)

The particle guide and acceleration factors are going to make this puppy dangerous at levels a small flyback can produce. Especially when you spend hours in front of the business end of that coil. The acceleration is what makes the coil OU.

Herman Anderson only used 50K volts in his water car. I seem to recall he used a round cell so it was probably a cyclotron doing the acceleration.

As for your capacitor idea. The inductive kick causes voltage spikes which charge the cap to higher values - electronics 101. It is only OU until you get smart enough to measure the current. Then... not so much.

MasterPlaster · « **Reply #5593 on:** February 09, 2011, 01:43:42 PM »

Quote from: quarktoo on February 09, 2011, 09:59:27 AM

I never joke about money, sharks, bears or radiation. Never!

The particle guide and acceleration factors are going to make this puppy dangerous at levels a small flyback can produce. Especially when you spend hours in front of the business end of that coil. The acceleration is what makes the coil OU.

Before you are paid off and making your exit, please explain what is the best way to guard against the particles.

ramset · « **Reply #5594 on:** February 09, 2011, 02:28:31 PM »

Master plaster
Quote:
quarktoo,
Before you are paid off and making your exit, please explain what is the best way to guard against the particles.
-------------------
MP,
I found this scratched over the urinal in the mens room
Q2
Quote:

One end of the coil is probably going to emit some accelerated particles that need to be shielded with some borated polycarbonate or lead.

-----------
Magluvin Has started a thread on this topic here
http://www.overunity.com/index.php?topic=10357.msg274095#new
Please post your ideas on this subject!

This could be one of the best ways to find an OU event on your bench?

Chet
PS
I think He's holding out for more money?
{St.Buzz needs another "Golden Star" to acsend to the next level,
Its looking like he may have to "BUY" one.Not good,]

As St Buzz's man servant, Q2 must come up with the scratch!

News:

User Menu

Author Topic: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze (Read 16506910 times)

core

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

core

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

core

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

core

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

core

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

dllabarre

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

Magluvin

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

Magluvin

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

alstream

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

exnihiloest

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

quarktoo

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

alstream

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

quarktoo

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

MasterPlaster

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

ramset

Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze