I for one don't post the results of all my experiments. 
Usually posting results brings out pages and pages of crap from "arm chair experimenters" "dis-informationalists" "derailers" and it's not worth it.

What are your results from Otto's circuit?

As for Stan Meyers.  He was having trouble keeping his circuit stable because as H2O was being split into H and O it left behind a higher concentration of all the other minerals in the water thus changing the capacity of the water fuel cell.  As the capacity changed he lost resonance.  That's one of the reasons why Stan developed the injectors.

DonL

 I hear you Don. I have been working on a dis-charger for the longest time. It's truly disruptive discharge but in a way nobody here is doing it. The problem I have is that my components are not rated to handle the power. When I do get a spark the gap points 'stick' together from the power. I need to order some hi-power diodes that can handle greater then 400 volts at 20 amps or so. Maybe that will prevent the premature failure of them. Also a hi power switching Mosfet would help also.

  When I get it down pat I will share it. I do have to say, when it works it provides a powerful hi amp white hot spark. Right now I am switching at 1Khz may have to raise this higher. Also I'm trying to hit 600 volts or greater.

Respectfully,

Core

It is interesting when you do the math on what Saint Buzz just wrote.

The frequency for ferro nuclear magnetic resonance is ~21.5 MHZ with is a wavelength of:

13.953488372093025 meters

The copper wire/tube running through the center of the coil produces a 1/4 wavelength shift for a length in meters of:

3.4883720930232562 meters

13.953488372093025 meters
divided by 3.4883720930232562 meters
= 4.0000000000000000573333333333333

The four phases or 90 degrees of a sine wave to infinity or very close anyway.

Saint Buzz told me you need the spark gap to produce that cavitation to launch the electrons off the highest orbit. Timing is everything.

So if he was using 470 uf of capacitance, the inductance would be:

1.1658976099789422e-7 uh

The frequency would be ~21.5 mhz

and the impedance would be 0.000015750026072109068 ohm

That sounds quite plausible for the coil shown in his video.

The atomic rotational differences between ferrite and soft iron would explain why they are not seeing the heating problem normally associated with this type of a device or method.

[ Insert many thunder claps and much lightning ]

Saint Buzz hath come down from the heavens to help thy mortal souls and thou shalt listen to thy words of wisdom.

TheBuzz hath filched a schematic of the SR193 device for thy weary minds to ponder. Thou will notice a RC RESONANT inductor capacitor section which produces the mesomeric (resonance) effect upon the electron orbital planes of the FE56 atoms. The reduction from FE56 to FE54 yields two electrons for which you may keep to light your way.

Next you see a "modulator" coil. The combination of these two frequencies is called heterodyne and the result are frequency sidebands and harmonics which reach far into the spectrum in both directions.

This is what Stan Meyer referred to as "electron bounce phenomena". Saint Buzz and his chosen "Quarktoo The Holy One" hath preached this upon deaf ears for years. Let those that have eyes that see and ears that hear, find their way to the free energy heaven through mass to atomic energy conversion. (E=MC2) The souls of all others, not so much...

The acceleration which is [ the word ] is produced by the cavitation of the particles through shorting the electron to the proton as the electron oscillates from its highest to lowest orbits and subsequent energy states. As the negative particles build up, thy needs to have an earthly ground to send them to or the entire device could reach out and bite you with death.

The radiation shielding requirement is necessary (ALPHA, BETA AND GAMMA RADIATION EMISSION) or you will be joining Saint Buzz in the heavens once you die of cancer. Heed thy warning for this device is not for the feeble of mind such as Grumpy and RAMSET THE DAMMED!

Ramset THE DAMMED where is the star you hath stolen from Saint Buzz! I shall roast your even toed cloven feet and serve you to lesser beings if it is not returned! I want my seventh star back!

Saint Buzz shall now ascend back to the heavens to bask under the light that shines from Thine many golden overunity.com stars and elite forum status.

 That wiring diagram has been around for a long time and has been dismissed by the Russians. Please stop posting diagrams you are finding on 'Google search' as an 'ah ha' moment. Please read the last 300 pages before posting. This is old.

Respectfully,

Core

In this photo you can clearly see the ferrite ring cores:

That picture also looks as if the copper rod is a mass of smaller wires.

Mags

This thread is for Kapanadze replication not SR.
"Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze"

Please stop derailing this thread.

Take SR replication to it's own thread.

Thank you
DonL

"derailing this thread"

According to SR, it is a Kapanadzi replication of < 5KW. Who elected you thread police? After 350 pages of pure stupid, I would say this thread has already been derailed.

An important component of why that device works has been overlooked by rocket surgeons like you in spite of the fact that I already disclosed how to build a device using this method and have posted the information many times. The compression and subsequent acceleration loop is plainly visible in both the photos and the schematic. Are you part of the suppression crowd or just having a slow day?

Now if you can do a better job of explaining how and why the device works, I would love to hear all about it. Until then, the obvious and already patented Mace generator is in plain view. You can call it a Kapanadzi if it makes you happy.

In this device  not possible to calculate the powerful. The cold electricity must convert to the usual .We were asked someone from Turkey, with the question whether this is possible with Inkomp technology.

...
An important component of why that device works
...

We have not yet the proof it works. We'll get it when it will be duplicated by independent third parties.

We have not yet the proof it works. We'll get it when it will be duplicated by independent third parties.

I'm working on it. Someone wrote in english on the schematic and got some some stuff wrong. The positive buss is labeled to foot 14 of chip just above the filter caps which is not correct.  (obviously)

What I do know is the coil does acceleration through compression - that's obvious. The schematic and what is seen in the photos matches perfectly. How he starts and stops the device matched the schematic. Why it works is obvious or should be to anyone that has been paying attention. You can see a extra pad to the left of the push pull transistors where SR made an edit. Normally you would not be able to tie the two base legs of the transistors together like that but the photo of the device oddly indicates that is true. I have not looked into that but it is an easy fix. The end of the coil ( ferrite) sticks out just the way Kapanadzi's does. The similarities are endless.

The "big secret" to kapanadzi's device is that copper running up through the core and the 1/4 wave conversion. As far as standing wave is concerned, two circuits will always have a standing wave.

1. Open circuit.
2. Shorted circuit.

Now look at the high voltage coil and tell me what you see. I see an open circuit fed from a spark gap. So half the time it is open and half the time it is shorted. - Standing wave.

Now look at the pickup coil. Notice how that goes to another transformer? That makes it a closed loop and a compression loop. (Acceleration)

More acceleration through Hertzian compression is going to occur on the modulation coil if the timing on that is right and you can see how he wrapped the pickup coil on a wood dowel supporting the upper plastic plate to get that timing right.

Things are rarely one thing or the other unless you are a half wit. Rather, things are one thing and the other. I see one thing AND the other. Feel free to prove me wrong.

The prevailing theory on Kapanadzi is that it is hertzian wave compression of a standing wave. I see all the elements.

Would Kapanadzi lie if he did say this is not his principle of operation? Ha Ha Ha Still not done laughing. Ha Ha ha

He originally registered it as a "registered trade secret" to avoid patent from what I recall. If he discloses how it works, he loses that protection.

Feel free to prove me wrong with some facts. Telling me some rumor of what TK said doesn't cut with me anymore than telling me to take my ball and play somewhere else.

The facts are in the photos and schematic. If you need more than that to replicate, buy some golf clubs, this is the wrong hobby for you.

EDIT

I have already taken one stab at replication and am starting on my second coil using my own technique. Let me know when you catch up with me and then you can tell me to take my ball and play somewhere else.