Yea MagnaCoaster started shipping units about 6 months or so.  The only way they would let them sell the units is if they output Pulsed DC.  They charge way to much for those.  They probably cost 150 buck to make it in part.  They start at 6500$ and go up.  This is the cheapest unit.  But shit it puts out 100 Amps.  Thats pretty good. You just need a step down transformer and an invertor, or better yet the DC to AC inverter that guy on youtube made with the two toroid's that are stacked on top of each other.  He sells them now.  They are real cheap to make and seem to be real good at conversion without all the heat.

Vorktex 4.8 KW - 4 - 12
4 outputs of 12 volts 100 A.
This head is an add on to the house that needs to add more power to the existing solar or wind project
Unit is set up to give only 4 outputs @12V 100A fast pulse DC. This power must be feed into a battery bank.
$ 6500.00 USD plus shipping

Wow for the On-Grid unit it cost a whopping 45 Grand.  WTF, they only making it for the wealthy??  Who's got 45 grand to throw around like that.

Induction into the motor coils. Grum is spot on. Cmon lads wise up to these scammers!

How about such simple thing like a wire?

http://www.tudou.com/programs/view/Jlc173XioQE/

At 02:22 there is a subtle cross-fade in the video, at 08:18 I can see something that looks like a very thin wire under the plate like that wire wound on the coils.

Hence, shaded pole motors trick busted, case closed.

Mr. Alperen also chimed in on his assessment of Kapanadze, saying:

    From what I can tell, this technology can't be industrialized.

you closed the case saying fake. you spot one wire  where is the other?

and if its one wire transmission then  where are avramenko diodes?

and if its induction then why there are magnets in the rotor coz ac  motors dont have magnets in rotors.

Hoppy,
  I don't know what the duty cycle is, but thats the only way he could sell it on the open market.  What he is doing is the same basic concept of Tesla/Kapanadze.  He is using very strong magnets, over a coil.  Tesla used strong magnets over a spark gap which made the Impulse waves a lot stronger.  I also used magnets in my setup.  I noticed that when you use the north and south poles facing the spark gap that the output of the disruptor coil was drastically increased.  He is using make and breaks thru a coil with very strong magnets, north and south facing a copper coil.   Same thing.  You have to use DC for it to work at it best.  When using AC the make and breaks have to be faster then the cycles per second.  Its the Unidirectional property again.

a.king21

what if "the secret" is so simple you cannot hide it? so simple that even an uneducated man can build it over weekend?
what then? another war? face reality

I respectfully disagree, that's far from the most important criteria for a "OU device". I would argue that the most important criteria is finding an "Energy source" (and it must be a physical one) that allows you to draw from it. As an example, imagine you tapped into a natural gas pocket in your backyard. From this you can power a simple steam boiler, at no fuel cost to you. That in essence is Free Energy. You would be heating water by drawing freely from the earth.

So I would reason that the first question we need to ask, and perhaps the largest to solve is "What physical matter is there that will absorb cosmic energy automatically (for lack of a better phrase) AND will readily 'give off' energy at low cost or no cost to you in the process.

Another small example. Lets say we have a large dark colored stone. We place this stone in the hot summer sun all day. At night we bring this stone inside to an air conditioned room. From being in the sun all day the stone has absorbed some of the suns energy. When we bring it into a cool room the stone 'automatically' gives up its energy to the surrounding environment.  Our air conditioning system, in the room absorbs the energy, in the form of heat, into the refrigerant in the cooling coil (this is the evaporator coil). In turn the refrigerant rejects this heat back into the environment via the condenser coil.

So what did we do? we basically 'charged' the refrigerant with energy from the sun in a very indirect manor BUT a very efficient manor.
By efficient I mean:
1. It did not cost me anything to charge the stone with the sun's energy its a natural process.

2. It did not cost me anything to reject the absorbed solar energy from the sun, again another natural process due to the rooms heat energy level being lower then that of the stone. By having an air conditioner I simply created an 'environment' for the natural process to take place. (in theory I didnt need an air conditioner, an underground room or a cave would create the environment)

3. The refrigerant naturally absorbed this released energy simply because again, I created the correct environment for the refrigerant to do so naturally.

4. I then rejected this energy back to the environment PLUS extra energy from 'Heat of compression'.

So in essence the Suns energy came in at a specific energy level and left (back to the environment) at a higher energy level. Higher because I had to use some energy to compress the refrigerant to a higher pressure/temperature.

I have always been fond of this specific Tesla quote:

- Find something that rejects it at low cost, or no cost.
- Absorb it.
- Add to it.
- Reject it.

Too simple right?

Ok my Two Cents for the rest of the Year.

- Core

hendershot free energy!

http://www.youtube.com/watch?annotation_id=annotation_838019&feature=iv&src_vid=wJwKemnEUko&v=BJ2H2BHTjuo


00