Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze  (Read 16605266 times)

DilJalaay

  • Full Member
  • ***
  • Posts: 115
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #13680 on: September 03, 2012, 04:34:27 PM »
Hello All,
Here i found the latest videos of "Don Smith Inventors Weekend 2005 DVD1 and DVD2".
It looks T.K doing the similar work with very little difference.

http://www.youtube.com/playlist?list=PLE936468280B4BEED&feature=edit_ok

Hope you enjoy all the best and regards,

D.J

yfree

  • Full Member
  • ***
  • Posts: 143
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #13681 on: September 03, 2012, 04:37:36 PM »
Something to consider: The output spark gap is HV. The wires to the Spark plugs are HV. The wires to the heater are HV.
The braid is a HF/HV shield.
Conclusion: His secret somehow generates HV, whilst using mains 50 Hz 220 volts.
The centre of his blue output coil pack is shielded with what appears to be polystyrene.
...
Resistive loads like bulbs and heaters can be supplied with high voltage, high current pulses and work properly, as long as V*I*F (F - duty cycle or fill factor) is around their power rating. TK devices inherently produce high voltage pulses as they rely on fast avalanche, extremely high current (hundreds to thousands of A) phenomena. To reduce these voltage spikes on the load he uses the visible coil connected between the output of the black box and the load and the spark gap arrestor to make sure that the input to the load is not sparking. The output of the device is still high voltage and pulsed although not as high as the output of the black box. This is why the visible coil is wound with a well insulated wire. The internal electronics of the device cannot use this HV pulsed output, therefore a transformer is employed to lower the voltage as described here or there.
« Last Edit: September 03, 2012, 06:14:41 PM by yfree »

sparks

  • Hero Member
  • *****
  • Posts: 2528
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #13682 on: September 03, 2012, 08:25:14 PM »
Resistive loads like bulbs and heaters can be supplied with high voltage, high current pulses and work properly, as long as V*I*F (F - duty cycle or fill factor) is around their power rating. TK devices inherently produce high voltage pulses as they rely on fast avalanche, extremely high current (hundreds to thousands of A) phenomena. To reduce these voltage spikes on the load he uses the visible coil connected between the output of the black box and the load and the spark gap arrestor to make sure that the input to the load is not sparking. The output of the device is still high voltage and pulsed although not as high as the output of the black box. This is why the visible coil is wound with a well insulated wire. The internal electronics of the device cannot use this HV pulsed output, therefore a transformer is employed to lower the voltage as described here or there.
   The energy of the inidividual electrons ionized from a gas is totally dependent on the wavelength of the pulse and independent of the amplitude or intensity.  Tesla also describes how very high voltage and very short pulses renders the natural medium conductive.  Of course it is conductive because plasma has very high amounts of free electrons whereas in oxygen and nitrogen the electrons are bound.  The magnifying transmitter was going to pull it's power from ionization of the air on his plates.  This electron avalance gain in his top capacitor plate would as I described earlier send his secondary into resonance which then would be transmitted via one-wire using Earth as the wire.  Bohr's classical atomic structure was never refuted but modified to assign electrons different signs due to the Pauli exclusion principal.  The Pauli exclusion principal was developed due to the ultravioloet light catastrophy.  The uv catastrophy simply was catastrophic because of the theoretical physicists not admitting that space was alive.  They described space as a perfect blackbody radiator and therefore had no preference as to what frequencies it would store or what frequencies it would be transparent to.  If there was fluctutaions of the vacuum itself it meant it was an unlimited scource of energy/change and the bigbang theory was dead.  Recent observations of cosmic infrared background radiation have been hampered due to the large amount of cosmic infrared foreground scources.  The cosmologists using infrared astronmical sattelites have found vast clouds of dust.  They then turn around and say that this dust is very cold and heated by starlight.  How can something that glows in the infrared bands be cold.  I remember touching the glowing metal element of an electric stove top and discovered at the age of 3 that things that glow are not cold.

yfree

  • Full Member
  • ***
  • Posts: 143
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #13683 on: September 03, 2012, 10:00:41 PM »
   The energy of the inidividual electrons ionized from a gas is totally dependent on the wavelength of the pulse and independent of the amplitude or intensity.  Tesla also describes how very high voltage and very short pulses renders the natural medium conductive.
...
You have to be more specific, because no matter how I look at this, I do not see any connection between my quoted post,  #13708,  and your replay.

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #13684 on: September 03, 2012, 11:53:18 PM »
Resistive loads like bulbs and heaters can be supplied with high voltage, high current pulses and work properly, as long as V*I*F (F - duty cycle or fill factor) is around their power rating.
Power dissipated in a resistive load that is supplied with a pulsed current: P=R*(I*F)2

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #13685 on: September 04, 2012, 12:00:39 AM »
TK devices inherently produce high voltage pulses as they rely on fast avalanche, extremely high current (hundreds to thousands of A) phenomena. To reduce these voltage spikes on the load he uses the visible coil connected between the output of the black box and the load and the spark gap arrestor to make sure that the input to the load is not sparking. The output of the device is still high voltage and pulsed although not as high as the output of the black box. This is why the visible coil is wound with a well insulated wire. The internal electronics of the device cannot use this HV pulsed output, therefore a transformer is employed to lower the voltage as described
That is very likely

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #13686 on: September 04, 2012, 12:33:09 AM »
@ wattsup


Quote
@all

OK, now I know it is extremely important not to have an aluminum layer in the coax. It is just totally isolating and cannot work in any way. Standard coax will never do because that aluminum layer is killing the effect.

I pulsed the center conductor with high voltage and got nothing on the shield. Nada. Completely dead. I have done this hundreds of times to know what to expect as a minimal result but the aluminum layer is really bad news. I was sweeping up to 1 mHz and nothing. TKc before and after load to ground and nothing. Regular coax is bad news.

That's strange because when i pulse my coax with HV, i surely measure high voltage.
I coupled 2 coax coils and center pulsed the primary with HV from a flyback.
Even the center conductor of the secondary shows 1000V pulses.

A third stepdown coil still shows 800V pulses, so through 2x shielding of the coax cables.

Video to be seen here:  http://www.youtube.com/watch?v=fb835qxNPlI&feature=youtu.be


I wonder what your setup was when you found no response on the shield.

Regards Itsu.

yfree

  • Full Member
  • ***
  • Posts: 143
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #13687 on: September 04, 2012, 12:42:57 AM »
Power dissipated in a resistive load that is supplied with a pulsed current: P=R*(I*F)2
This is correct. But if F is defined as a power fill factor, it is still I*V*F.

wattsup

  • Hero Member
  • *****
  • Posts: 2606
    • Spin Conveyance Theory - For a New Perspective...
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #13688 on: September 04, 2012, 01:26:58 AM »
@All

Getting back to the physicals of the device.

Does anyone know if our Russia fiends have manged to find any formal specifications on the triple transformer (TT)? We need to know the design specs of the TT. What is the standard design input voltage to the primary? What voltage will the HV line produce at that design voltage? What amperage rating is the HV?

Regarding tests on the TKc wire, I found an effect between the coax center conductor (CCC) (pulsed) and the outer shield (OS) where only one end of the OS goes to load and the other side goes to Earth ground. This is at low level testing to find the frequencies. Around 900kHz to 1.26MHz with the HV from a flyback. hehehe There are many variables to test. Even at low voltage there is an effect but I need to test much more.

Regarding where TK tapped the output wires to the plug of the heater, technically there should be four conductors at that point, so maybe they did not want anyone to see how it was connected.

When I start my set-up, using two batteries, I have to put one battery positive on the drive side and the second battery positive to one side of the pulsed primary. That's two switches to start her up. I imagine TK had to do the same thing to start his set-ups with two switches, one to connect his temporary battery start that loads via HV pulse a dioded tank capacitor, and the second one to start pulsing from the tank capacitor to the drive system.

We really need the specs on the TT.

wattsup


Zeitmaschine

  • Hero Member
  • *****
  • Posts: 1267
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #13689 on: September 04, 2012, 03:00:17 AM »
Again I think the 2004 video is a big clue. It is almost as if he wants to erase it but cannot, so he tries to make us forget about it.
He first discovered the effect in 1996. So he made very little progress until 2004.
This is because nearly the whole working device is in plain view in the 2004 video.

Neither the helical coil nor the adjacent spark gap does anything here, because they are not present in most of the other devices. That means the white and the orange cable on the spool have also no function except that of a simple extension cord.

In the tin can there has to be a generator for high frequency and high voltage regardless whether that contributes to energy creation or not. This means there is not much room left for something else in this round box like a heavy transformer or coil or capacitor, etc.

This implies that in this video almost the whole working device is visible in plain view with a minimum of hidden parts.

Done the experiment. lol
You get resonance between L1 and L2.
And this means? Free Energy??

The usual way a transformer works is that the current through the primary coil creates a magnetic field in the core in order to get a current by induction in the secondary coil. But if the iron core is hit with high voltage then what happens with the magnetic field? Could there be a magnetic high frequency field created by electrostatics without the need of applying a lot of power (through an electric current in a coil) so that the field creates a current in the secondary coil and then this current interferes with the regularly 50Hz frequency?

In any case a trained technician would either connect the iron core of a transformer to nothing or to ground but surely not to high voltage.

So much for the theories ...

Cap-Z-ro

  • Hero Member
  • *****
  • Posts: 3545
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #13690 on: September 04, 2012, 03:20:46 AM »

Deleted


a.king21

  • Hero Member
  • *****
  • Posts: 1650
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #13691 on: September 04, 2012, 06:09:50 AM »
QUESTIONS AND ANSWERS.
  QUESTIONS  Does anyone know what the two components in the 2004 video are?
 
ANSWERS?  There's an elephant in the 2004 room he he.
It looks like an enormous capacitor, which the guys carried out in the green box video.
If I'm right, we now know where the other end of the braid goes to - a giant capacitor.
(It looks like a piece of braid is also used as shielding, indicating HF/HV in the "capacitor".)
If I'm right, then this is what is hidden in one of the boxes of the aquarium 2.
Discussions, analysis and speculation welcome.
PS Does  anyone on the Russian forums recognise the "capacitor"? ???
 

cheappower2012

  • Full Member
  • ***
  • Posts: 245
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #13692 on: September 04, 2012, 06:22:40 AM »
a.king21
 the two black things in the 2004 video are the same heat sinks in the green box video
on there side.The black box on the chair in the 2004 video, is the step down transformer with bridge rectifier
in the green box video.

forest

  • Hero Member
  • *****
  • Posts: 4076
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #13693 on: September 04, 2012, 07:52:32 AM »
a.king21
 the two black things in the 2004 video are the same heat sinks in the green box video
on there side.The black box on the chair in the 2004 video, is the step down transformer with bridge rectifier
in the green box video.

yes, you got elephant  ;) - just step down transformer

captainkt

  • Sr. Member
  • ****
  • Posts: 262
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #13694 on: September 04, 2012, 11:27:42 AM »
@a.king21, in the still (screwed up) the coil nearest the screw looks modded as if none factory winding under paper sleeve and what looks like the end of sellotape showing on top of core.
Regards
Keith