Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: TPU Clues  (Read 59528 times)

newbie123

  • elite_member
  • Sr. Member
  • ******
  • Posts: 459
Re: TPU Clues
« Reply #75 on: July 01, 2009, 08:57:06 PM »
Here are some Youtube video experiments related to intermodulation:

http://www.youtube.com/watch?v=_mVPfwqEPaM (Passive intermodulation "PIM" with magnet)


newbie123

  • elite_member
  • Sr. Member
  • ******
  • Posts: 459
Re: TPU Clues
« Reply #76 on: July 01, 2009, 09:49:56 PM »
Gyroscopic effect can also be banging fields/coils, like in a speaker.
It does not have to mean something is spinning.

I think you're wrong.    A gyroscopic effect is a specific effect  that requires spinning around an axis.. Not oscillations between 4 coils...     

If what you say is true.   You should be able to put  your 4 coil circuit on  a rod (like a gyroscope),  turn in on, and watch is sit upright like a spinning gyroscope..   I don't see this happening.  Where did you get this idea?

Nikola Tesla

  • Newbie
  • *
  • Posts: 25
Re: TPU Clues
« Reply #77 on: July 01, 2009, 10:08:56 PM »

Where did you get this idea?


Does it matter?

Think of this picture:

Nikola.


giantkiller

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 2791
    • http://www.planetary-engineering.com
Re: TPU Clues
« Reply #78 on: July 01, 2009, 10:13:27 PM »
Here is Room3327 link:
http://www.overunity.com/index.php?topic=6774.msg164447#msg164447

Is the gyro feeling radial or jacked back and forth?

I posted this corrected pic by room3327. He actually did an excellant job of documenting the gk4 and them some. :)
I have done the 'Z' jumper config and am now doing the 'n' config like in the pic again. He also had to correct the winding to get to a connection between the serially connected coils. I terminated all the ends to terminals for this very specific reason.

Put a neo by an inside edge and listen to it scream and jitter. But don't touch it.

The tpu driven like a single axis rotovertor would be frictionless. Then the single axis will work. Of course, Virtual axis that is.
« Last Edit: July 01, 2009, 11:04:38 PM by giantkiller »

newbie123

  • elite_member
  • Sr. Member
  • ******
  • Posts: 459
Re: TPU Clues
« Reply #79 on: July 02, 2009, 12:28:32 AM »
I don't think an electric sander's motion could create a true 'gyroscopic effect' but It would definitely create a  inertial effect similar  to a gyroscope...  Maybe this is what SM was referring to..     

How could you emulate this effect with a solid state toroid?



Mk1

  • Hero Member
  • *****
  • Posts: 2068
Re: TPU Clues
« Reply #80 on: July 02, 2009, 03:44:57 AM »
@all

Lets not forget to bottle it !




Nikola Tesla

  • Newbie
  • *
  • Posts: 25
Re: TPU Clues
« Reply #82 on: July 02, 2009, 09:49:16 PM »
I don't think an electric sander's motion could create a true 'gyroscopic effect' but It would definitely create a  inertial effect similar  to a gyroscope...  Maybe this is what SM was referring to..     

How could you emulate this effect with a solid state toroid?

Page 41:From Steven:

Carl is absolutely correct about most everything in his letter.
You I am sure have already realized that.
There are exact points of interest in 9 and 13.
Yes we are definitely spinning the field at an unbelievable high
rate.

Page 37 The Carl Doc:

9. Now to the question of the little pieces of wire and the magnet.
I don't remember anyone anwering this to your or Mr. Mark's
satisfaction.
Let me have a go.
When you move a magnet across a wire you generate a current in
that wire.
However, what was not iterated is that the amount of current
generated is not only a matter of the strength of the magnet, but
rather the SPEED and distance at which that magnet is moved
across that wire.
Thus when we speak of moving the magnet across a small piece of
wire at the speed of a gunshot, you generate a very sudden, high
voltage spike in that little piece of wire. Conversely, if you could
move that wire crossways through even a weak magnetic field
with few flux likes, you could generate a voltage spike.
In essence Mark is doing this in his toroid.
He states he is running at about 5kHz.
For four coils (like the one that is open on the cardboard box in his
garage with two lamps),

he may be banging two opposed coils
simultaneously with spikes, with the magnet forcing one direction,
or he is running them sequentially.
For the sequential version, that would mean the "magnetic flux
North" (for lack of a better way to describe it) passes one spot in
the toroid 1250 times per second.
The RPM of the flux would therefore be AT LEAST 75,000RPM.
Can you imagine the kind of power you might generate from Neo
mgnets in an armature near windings if you COULD rev that puppy
up to 75,000RPM?
Only this toroid has no back EMF when a load is put on the wires.
Remember I was talking about SPEED of the magnet passing the
wires playing a significant role in the voltage produced.
If we take the above example of 75,000 RPM, it is easy to calculate for a
14" diameter totoid, that the actual speed of the magnet "flying"past the
wires at a very close range would be 3,123.74 statute miles per hour or
4,581.5 ft/second.
Compare this to the bullet of a high powered rifle at 2,800 ft/sec.

Page 38 The carl Doc:

13. When we look at the earth's magnetic field, there are some
weird things to look at.
Does a high-speed rotational flux field draw or lense or
concentrate flux lines into a Mark device?
Maybe that is exactly what it does.
This simply ADDS more density to the field.
However, something else strikes me more simply.
Mark has set up his terrific sequential pulsed magnetic field with a
small battery (who cares if there is a battery - that point is moot
when you look at the power out) which rotates nearly twice as fast
as the bullet from a high powered rifle.
It creates enormous numbers of flux lines crossing wires per
second.
That is key and it takes little power.
Once power is established, one could take a tiny amount from the
output and run the circuit, so again the battery is moot.
The main thing is the device's strange reaction to physical
movement.
I attribute this to the ENORMOUS impact of the SPEED at which
the magnetic flux moves.

Nikola.

newbie123

  • elite_member
  • Sr. Member
  • ******
  • Posts: 459
Re: TPU Clues
« Reply #83 on: July 02, 2009, 10:11:46 PM »
NT,

Thanks for posting this,  I read parts of it but missed some of the clues.



Page 41:From Steven:

Carl is absolutely correct about most everything in his letter.
You I am sure have already realized that.
There are exact points of interest in 9 and 13.
Yes we are definitely spinning the field at an unbelievable high
rate.

Page 37 The Carl Doc:

9. Now to the question of the little pieces of wire and the magnet.
I don't remember anyone anwering this to your or Mr. Mark's
satisfaction.
Let me have a go.
When you move a magnet across a wire you generate a current in
that wire.
However, what was not iterated is that the amount of current
generated is not only a matter of the strength of the magnet, but
rather the SPEED and distance at which that magnet is moved
across that wire.
Thus when we speak of moving the magnet across a small piece of
wire at the speed of a gunshot, you generate a very sudden, high
voltage spike in that little piece of wire. Conversely, if you could
move that wire crossways through even a weak magnetic field
with few flux likes, you could generate a voltage spike.
In essence Mark is doing this in his toroid.
He states he is running at about 5kHz.
For four coils (like the one that is open on the cardboard box in his
garage with two lamps),

he may be banging two opposed coils
simultaneously with spikes, with the magnet forcing one direction,
or he is running them sequentially.
For the sequential version, that would mean the "magnetic flux
North" (for lack of a better way to describe it) passes one spot in
the toroid 1250 times per second.
The RPM of the flux would therefore be AT LEAST 75,000RPM.
Can you imagine the kind of power you might generate from Neo
mgnets in an armature near windings if you COULD rev that puppy
up to 75,000RPM?
Only this toroid has no back EMF when a load is put on the wires.
Remember I was talking about SPEED of the magnet passing the
wires playing a significant role in the voltage produced.
If we take the above example of 75,000 RPM, it is easy to calculate for a
14" diameter totoid, that the actual speed of the magnet "flying"past the
wires at a very close range would be 3,123.74 statute miles per hour or
4,581.5 ft/second.
Compare this to the bullet of a high powered rifle at 2,800 ft/sec.

Page 38 The carl Doc:

13. When we look at the earth's magnetic field, there are some
weird things to look at.
Does a high-speed rotational flux field draw or lense or
concentrate flux lines into a Mark device?
Maybe that is exactly what it does.
This simply ADDS more density to the field.
However, something else strikes me more simply.
Mark has set up his terrific sequential pulsed magnetic field with a
small battery (who cares if there is a battery - that point is moot
when you look at the power out) which rotates nearly twice as fast
as the bullet from a high powered rifle.
It creates enormous numbers of flux lines crossing wires per
second.
That is key and it takes little power.
Once power is established, one could take a tiny amount from the
output and run the circuit, so again the battery is moot.
The main thing is the device's strange reaction to physical
movement.
I attribute this to the ENORMOUS impact of the SPEED at which
the magnetic flux moves.

Nikola.

Mr_Video

  • Jr. Member
  • **
  • Posts: 63
Re: TPU Clues
« Reply #84 on: August 03, 2009, 06:44:30 PM »
Has anyone noticed that it may be possible to determine one of the frequencies of the TPU by what is seen on one of the videos ?

I figured that it's about 180KHz (give or take 10KHz)
square wave, possibly a 40-50% duty cycle .

turbo

  • Guest
Re: TPU Clues
« Reply #85 on: August 03, 2009, 06:50:53 PM »

EVERYTHING IS THERE. LOL


You think EVERYTHING IS THERE...

BEP

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 1289
Re: TPU Clues
« Reply #86 on: August 03, 2009, 06:58:55 PM »
Has anyone noticed that it may be possible to determine one of the frequencies of the TPU by what is seen on one of the videos ?

I figured that it's about 180KHz (give or take 10KHz)
square wave, possibly a 40-50% duty cycle .

How did you determine that?

Mr_Video

  • Jr. Member
  • **
  • Posts: 63
Re: TPU Clues
« Reply #87 on: August 03, 2009, 07:16:30 PM »
the interferance on the TV set .



MACEDONIA CD

  • Sr. Member
  • ****
  • Posts: 388
Re: TPU Clues
« Reply #88 on: August 03, 2009, 09:47:55 PM »
heloo  is geting HOT  HERE 

for all  <<<DONT WORY SOON WE WHILL  SEE THE NEW  REBORN T.P.U

>MYBE LIKE Steven  t.p.u 

WHAT YOU THING <<@marco  you have lost tomuch $ for nothing and still  you dont getit   

ha  ha ha ha ha

MACEDONIA CD

  • Sr. Member
  • ****
  • Posts: 388
Re: TPU Clues
« Reply #89 on: August 03, 2009, 09:56:51 PM »
@ mr video

I LIKE ASK ONE THING
WHAT YOU THING
YOU SEE HARMONICS IN THE TV CLOUSE AND NOISE PICTURES FROM STEBEN VIDEO

AND  I ASK YOU  WHERE IS HAT MAGNET FILD HO HAS RUN IN TO THE SMALL TPU CLOUSE THAT TV ON STEVEN

IF THERE IS SOME MAGNET FILD IN TO THE TPU AND IS CLOUSE TO TV RECIVER

THEN I WHILL  SEE THE COLORE IN THAT TV BECOUSE THE IF THERE IS MAGNET SOME FROM TPU TV WHILL BE ALL DESTROYING WHIT COLORE
<LIKE  YOU HAVE BROKEN DEGAUSE COIL IN SOME TV RECIVER >

ISt
and clues for that is....
<<enyone  OF PROFF  HEREWHAT YOU WHILL ANSFER OF THAT >

TV RECIVER CLOUSE TPU  IF TPU GENERATED STRONG ELKTROMAGNET FILD  THE TV  WHIL BE SHOWING TO SCRENN  IST

MY THING IS THAT THE TPU IS WORKING IN WHIT SMALL ELKTROMAGNET FILD WHIT SOMELETS SAY SOME TV HARMONICS FREK.

<<STEVEN HAS SAY THE TRUE<<LIKE YOU HAVE VERY SMALL MAGNET PER. AND MOVE FAST LIKE A GUN BULYTH >>