Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: The Master Of Magnetics "Steven Mark"  (Read 1227475 times)

Esa Maunu

  • Jr. Member
  • **
  • Posts: 99
Re: The Master Of Magnetics "Steven Mark"
« Reply #660 on: September 21, 2006, 12:28:45 PM »
There are many interesting phenomenas on the area of free - energy devices and with the devices that produces antigravity effects.
After researcing this kind of systems, i found that there is one common thing that exsists behind with almost every this kind of devices,for exsample bifilar coil type devices( Mark device etc. ),Grays device, Testatika Machine,Searl generator, only to mention of few.

This common thing is a ability to produce source free magnetic structures ( SFMS ).This kind of magnetic structures, SFMS ,differs of conventional magnetic fields,because they are not closed systems, but open systems,it is one kind of bipolar magnetic, long and straight line.

The needed technology to produce this kind of magnetic structures is based on to method, how to cut the magnetic energy from the EM- half wave.
This can be possible,if we cancel the magnetic field by cutting the magnetic field with a sharp DC-pulses, for exsample with a bifilar coil structure that is feeded with microwave input.Here opposite magnetic fields cancels each other,when the wires are in 90 degrees angles with each other,DC pulse creates a magnetic field around the wire,and in a places, where wires are crossing,this sharp magnetic pulse cancels the microwaves magnetic component,and a "magnetic soliton" is created.
In short, the idea is to cut microwave magnetic component,from the half wave of the microwave.
The needed microwave frequency can be created by microwave oscillator,also a sparking creates a wide spectrum of microwaves,that induces in to coil.
The "magnetic soliton" , that we create with this magnetic field cutting system has a tendency to stretch and align with parallel to external magnetic field nearby.

This long and thin wave is a open system,that has a property to pump energy from the long distances, but only in to one direction,the system is like request to have energy,and we can have energy back as an answer.This process happens by phase conjugation, when reguesting signal and answer signal are are with excactly same line and phase.
Another property is that SFMS can go through all the matter, without a much attenuation or reflection.Also a gravity field is created around those SFMS lines,because there is shifts in a space time.

Detection of SFMS with a conventional EM-instruments is not easy,because most of the instruments are designed to detect EM-waves.Anyway, there are created instruments also to detect SFMS lines.

If you are interested about the subject,there is available some theoretical files,by Bibhas R.DE

http://www.journaloftheoretics.com/Links/Papers/BibhasDe.pdf#search=%22magnetostatic%20wave%20source%22


Esa

starcruiser

  • Hero Member
  • *****
  • Posts: 693
    • Starcruiser's Place
Re: The Master Of Magnetics "Steven Mark"
« Reply #661 on: September 21, 2006, 03:39:19 PM »

Hi Paul,
in one video or one thread over here Steven Mark did claim, that he made his first prototype
out of bailing wire, which is to my understanding just garden iron wire ?

You can see e.g. at Jean Louis Naudin site, that he has researched Barkhausen jumps
in iron material and saw also these avalance spikes, which have a basic
frequency of around 180 Khz.
So if you bring a permanent magnet close to an iron rod and have around the iron
rod an parallel LC tank circuit of 180 Khz with High Q ( low losses)
you can probably keep this LC circuit oscillating as Bob Shannon
did report, that also a static , not moving magnet near the iron material will keep
some domains flipping back and forth due to temperature fluctuations
or incoming scalar waves... He actually used it as a scalar wave receiver...

Look it up at Bill Beaty?s site  www.amasci.com

So have the magnet in the right distance, so the iron rod is at the most steep
BH curve at the right working point and the domains will flip back and forth inside
the iron rod and induce the 180 Khz pulses into the LC tank circuit.
But this must be build pretty big to etract any useful power, as
there are not many domains fliipping and the voltages are only in the Millivolt range.

But maybe Steven Mark is using something like this to start his process and
then feeds back the oscillations to other LC circuits and thus builds up a positive feedback loop
and thus the oscillations get bigger and bigger ?

This was my first basic understandingof how the Mark devices
work, but as TAO now found the quote that there seem to be
only  copper coils in the recent MARK devices, I wonder
if my theory with the Barkhause resonance was wrong...
Then why did he use "bailing" wire at all ?
Regards, Stefan.

hartiberlin,

What if the small torrid cores are using this effect to generate the starting kicks? I know you mentioned this in the above but I was looking to clarify this. The cores in his large unit have a silver looking torrid core, SM also mentioned aircore transformers so I believe this is an integral part of the design/effect. SO if the center/small torrid core is a Barkhausen effect oscillator, the second core maybe another tank circuit that couples this to a control coil???

THe other idea I had was the center coils maybe feedback pickup(s).

I also wanted to share an idea I am looking to try with mu TPU. I am looking to build a test coil setup this weekend and have been thinking the design over for a first run experiment and thought of using a HEI ignition coil module to drive the control coil(s), this would reduce the build time and expense since these can be obtained from the local autoparts store for less than $20.00 USD. This module would provide the isolation to the function generator and handle higher currents if using a 12v battery (small auto battery). All that would need to be considered is the control coils resistance in order to prevent over current in the module thus burning it out. BTW these can be heatsinked to increase their current handling.

Giantkiller,

The HEI module idea may be a simple solution to drive your coils as well. I have been using them to drive ignition coils to make a HV power source for lifter experiments so I know they work rather well with a signal generator as a trigger source.


Carl

otto

  • elite_member
  • Hero Member
  • ******
  • Posts: 1215
Re: The Master Of Magnetics "Steven Mark"
« Reply #662 on: September 21, 2006, 04:39:04 PM »
Hello all,

thanks Hartiberlin

I?am wrighting this post the 4th time (trouble with the network im my company)

Now please take your time and reed this:

In my earlier post I have described my setup of my TPU. After I burned a lot of BDX33C transistors I decided to use a TIP 151 transistor.With this transistor the output voltage rised to 470-480VDC or 880VAC! My meter on the power supply showed me +12V and almost no current. This I call resonance. The frequency was 70-80 kHz. Of course I can also see the harmonics. How? At resonance my meter shows me peak voltage and if I change the frequency at a lower or higher frequency I have again a peak voltage but not so high as in the resonant frequency.

What happened?

Lets see the values for the transistors:

BDX33C = NPN DARL.+DI, 100V, 10A, 70W, >200MHz, B>750
TIP 155 = NPN DARL.       350V,  7A,  80W, >10MHz , B>150

As you can see the difference is in the voltage and in B (current gain). Frequency is not critical. For myself that means that I have to find transistors with very high B and voltage.This is very important because with this transistors we have to build our 2 oscillators. How I know that there are 2 of them? In an earlier post I saw pictures of a TPU and I saw 2 oscillators (2 little coils, 2 yellow condensators 2 mikrofarad/2000V, 2 large electrolytes, resistors and one or two heatsinks for the transistors).

And now someting new:
 DISCLAIMER

I CANNOT TAKE ANY RESPONSIBILITY FOR ANY ACCIDENTS OR INJURIES THAT OCCUR FROM ANYONE TRYING TO REPLICATE MY TPU!! YOU RECREATE MY SETUP OF THE TPU AT YOUR OWN RISK.

What?s that??

In my earlier post I said that my TPU has 3 horizontally coils and one coil wound vertically through the donut.
Yesterday I wound an additional coil horizontally around the TPU and connected the pulsing transistor...
 
What happened?

In the first moment the voltage goes up to 500V and then every second 1V up to 1100VDC!! The AC I cannot measure. As I have no compass I stole from my wife a needle. I magnetized it and it always hangs over the TPU. This needle was "sleeping" until now. At low frequencies 1-10Hz this needle is jumping up and down and that means, I have a rotating magnetic field. Every change in the frequency changes the current through the coil and the magnetic field is weaker or stronger. Now I can "see" this field! In one moment the magnetic field goes to heaven and when I change the frequency the field goes to the earth. In this way I can totally control the magnetic field!
My setup works at a frequency of 4-6kHz (remember, no scope)
The meters on my power supply shows +12V and a little current. My function generator is set at 1VDC output and can handle only low crrents.
Last night I was playing with my TPU and trying to get better results.
I have a large capacitor (4microfarad/430V) connected from the minus to the ~leg of my bridge rectifier. To get more power I changed the capacitor with a 10 mikrofarad/100V. What happened? I had no time to look to the meters because I had every 1 second a loud bang from the capacitor! All the electronics didn?t notice this. Of course I changed the cap again. What is the current to destroy a capacitor? In kV!!

While I was working on the TPU I touched one leg of the rectifier. WOW! In this little piece of copper is so much energy stored that I will never forget this. Then I understood: the coil builts up the energy slowly (1 second) but releases it very, very fast. Like a very large electrolyt. In this moment I?am thinking of Tesla (genius) and his device to capture energy from the environment. With his plate he grabbs the energy and with a condenser stores it and then discharges very quickly into a load.
Meanwhile I noticed that my setup of the TPU is a horror!!!
Why?
As my monster showed me his power I took a faze probe (a little screwdriver with a little lamp in)(Probierstift) and saw that it lits on all 4 legs of the bridge rectifier and that means that the rectifier must be removed!
The transistor is wrong! I need a transistor with a high B and this is a MPSU transistor with B = 10000 and then connect him to a transistor that can handle hundreds of volts.
The control coil could be longer and the wire 0,5mm ....

I think you have enough for today.
Please excuse me if I was boring you but I only want you to help a little if I can.

Regards
Otto
P.S. I hope I figured ot how to post my shematic!



starcruiser

  • Hero Member
  • *****
  • Posts: 693
    • Starcruiser's Place
Re: The Master Of Magnetics "Steven Mark"
« Reply #663 on: September 21, 2006, 05:29:31 PM »
Otto,

Not boring me at all! I am very excited for you that you have found the magic mix of coil arrangement. I cannot wait to see your diagrams and possibly a pix of your setup. I would (as well as others I am sure) like to reproduce your experiement to validate it for you. After that i would think the next logical step is to develop an oscillator design that will work on its own without an external source to drive the TPU coils.

I am looking forward to seeing a px of your setup.
Great work!


Carl

PaulLowrance

  • Hero Member
  • *****
  • Posts: 2483
    • Global Free Energy
Re: The Master Of Magnetics "Steven Mark"
« Reply #664 on: September 21, 2006, 07:40:17 PM »
Quote from: hartiberlin
http://www.amasci.com/freenrg/bark.html

Thanks for the links and info Stefan.  I too have heard and read about the 180 KHz resonance. I think tao would love to see such an experiment where he could replicate it. Is this a secret? It seems so. Perhaps these inventors found a unique setup to get the 180 KHz resonance. Although as far as the actual Barkhausen effect itself, there is no 180 KHz resonance. This is something that's well documented in the science community. The Barkhausen effect by itself generates a wide spectrum. Have you read about the popular experiment where you wrap a lot of wire around hard steel, connect to your audio amplifier system, then move a PM toward and away from the steel. You'll hear pops and hissing noises. When looked on a spectrum analyzer we see there's a wide spread spectrum of frequencies.

Maybe the secret to the 180 KHz resonance is placing the PM in high electric field?  I don't know, but if anyone finds a detailed experiment that can be replicated to demonstrate a 180 KHz resonance then please post it.


Quote from: hartiberlin
there are not many domains fliipping and the voltages are only in the Millivolt range.

I agree, but that's only because nearly 100% of the avalanche energy is absorbed by the magnetic material. Consider Naudin's Metglass MEG. I would venture to say the amount of energy exchange occurring per second is enough to power an electric vehicle. Yes, that much! :)



Hi marco,

I just wanted to add a few things to your comments.

Quote
some people say that magnetic waves travel @ the speed of light to be exactly 299,792,458 m/s in vacuum
Yes, but as you probably know, that's only in a vacuum.


Quote
They also say that electricity travels @ the speed of light.

But electrons do not travel @ the speed of light.

see picture below the elektron you put in is not the same elektron that comes out at the end.

it's a diffrent elektron that exits the wire.

But the speed of in and out going elektrons does seem to take place @ the speed of light.

so electrons cannot travell @ the speed of light because of there mass.

People should understand there's a difference between the electron and the EM field. Under normal voltage levels the electrons travel at a snails pace, but it's the EM field that travels up to c. Nearly 100% of the energy is contained in the EM field. As to how fast the EM field travels really depends on the effective permeability and dielectric surrounding the electron. Permeability equates to inductances, which retards the EM field signal, which equates to slower speed. That's why an electric pulse (EM field) in bare copper wire may travel at 1/3 the speed of light, but may travel close to c in a television cable. The reason being is that the television cable has dielectric material, which cancels some of the wires inductance and there's also an outer shield which cancels out a great deal of the inductance.


Paul Lowrance

starcruiser

  • Hero Member
  • *****
  • Posts: 693
    • Starcruiser's Place
Re: The Master Of Magnetics "Steven Mark"
« Reply #665 on: September 21, 2006, 08:32:07 PM »
In my earlier post I said that my TPU has 3 horizontally coils and one coil wound vertically through the donut.
Yesterday I wound an additional coil horizontally around the TPU and connected the pulsing transistor...
 
What happened?

In the first moment the voltage goes up to 500V and then every second 1V up to 1100VDC!! The AC I cannot measure. As I have no compass I stole from my wife a needle. I magnetized it and it always hangs over the TPU. This needle was "sleeping" until now. At low frequencies 1-10Hz this needle is jumping up and down and that means, I have a rotating magnetic field. Every change in the frequency changes the current through the coil and the magnetic field is weaker or stronger. Now I can "see" this field! In one moment the magnetic field goes to heaven and when I change the frequency the field goes to the earth. In this way I can totally control the magnetic field!
My setup works at a frequency of 4-6kHz (remember, no scope)
The meters on my power supply shows +12V and a little current. My function generator is set at 1VDC output and can handle only low crrents.
Last night I was playing with my TPU and trying to get better results.
I have a large capacitor (4microfarad/430V) connected from the minus to the ~leg of my bridge rectifier. To get more power I changed the capacitor with a 10 mikrofarad/100V. What happened? I had no time to look to the meters because I had every 1 second a loud bang from the capacitor! All the electronics didn?t notice this. Of course I changed the cap again. What is the current to destroy a capacitor? In kV!!

While I was working on the TPU I touched one leg of the rectifier. WOW! In this little piece of copper is so much energy stored that I will never forget this. Then I understood: the coil builts up the energy slowly (1 second) but releases it very, very fast. Like a very large electrolyt. In this moment I?am thinking of Tesla (genius) and his device to capture energy from the environment. With his plate he grabbs the energy and with a condenser stores it and then discharges very quickly into a load.
Meanwhile I noticed that my setup of the TPU is a horror!!!
Why?
As my monster showed me his power I took a faze probe (a little screwdriver with a little lamp in)(Probierstift) and saw that it lits on all 4 legs of the bridge rectifier and that means that the rectifier must be removed!
The transistor is wrong! I need a transistor with a high B and this is a MPSU transistor with B = 10000 and then connect him to a transistor that can handle hundreds of volts.
The control coil could be longer and the wire 0,5mm ....

I think you have enough for today.
Please excuse me if I was boring you but I only want you to help a little if I can.

Regards
Otto
P.S. I hope I figured ot how to post my shematic!




Otto,

After re-reading your post I was wondering about the 4th collector coil you installed, is that wrapped around all of the coils including the control coil? To help clarify

As I understand it you wrapped the coax wire in 3 sections or coils with cork spacers, see below.....

-------------------------
 ///////////////////////////
-------------------------
 //////////////////////////
-------------------------
//////////////////////////
-------------------------

then wrapped the control vertically around a section of the dougnut

Was the 4th collector then wrapped horizontially around all coils?

Also you mentioned conecting the collector of the power transistor to the 4th collector coil as well as the control coil, is this accurate? do yo think this is providing a feedback loop of sorts? where did the other end of the coil connect to?

I was also thinking about the capacitor issue, have you tried connecting it accross the + and - terminals of the bridge rectifier? has it failed in this configuration also? If it was an electrolytic, the AC component would cause it to fail (blow up) and/or vent the gas produced by the electrolytic.  Make sure the electrolytic is rated at least as high as the DC component otherwise it will fail again. you can series connect them to increase the voltage rating (this effectively halves the value of the capacitance if both are equal value though) or put them in parallel to increase the capacitance value.

I hope this was of some help. I am looking forward to further posts regarding your testing.


Carl

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: The Master Of Magnetics "Steven Mark"
« Reply #666 on: September 21, 2006, 10:23:39 PM »
Hi Otto,
you probably only need to have freewheel diodes ("Freilaufdioden") across your coils,
so you don?t burn up your transistors.
Just press the REPLY button under the last post on the page at the right side and
then opens up a new window with an Attach:
formular, where you can attach a file from your harddisk.

Otto, we would like to know how your device looks like and then we can help
you to get it better and safer.

Pay attention with big caps, when you rectify high voltages and store them
in big caps you can get killed, if you touch a 400 Volts DC charge 1 uF cap !

I once touched accidently a 2000 Volts DC source and it did throw
me across the table ! ;)
;(

P.S: If youi have posting problems then first type all the text into the Notepad editor
and save the file on your Harddisk and then copy and paste into the Reply formular
over here.

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: The Master Of Magnetics "Steven Mark"
« Reply #667 on: September 21, 2006, 11:04:28 PM »
@Tao,
what was your wrong setup and how do you think is now the right setup ?
Do you have a schematic or a picture for it ?
Thanks.

Jdo300

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 682
    • The Magnetic 90 degree rule Theory
Re: The Master Of Magnetics "Steven Mark"
« Reply #668 on: September 22, 2006, 04:23:36 AM »
WOW!! Everyone here has been extremely busy I can tell. As it has only been a little over a day and I had already fallen 10 pages behind! Well, please bear with me here, I am responding to posts from everyone over the last day so this is pretty long.

Hi Jason,
nice experiment.

Can you try to measure, if the output wattage is higher than the input wattage
in your circuit ?

Maybe put in series with the function-pulse-generator a 10 Ohm resistor, so you can measure
the current from the function-pulse-generator into the circuit.
Maybe you will find a frequency, where you have more output than input power ?

Many thanks for this interesting experiment.

I have considered electrostatic coupling to be partially to blame for this effect but in my best experiment I was able to produce 35mA at about 70VDC using a small 1:1 transformer. I hooked the hot wire from the function generator (set at 20V) onto one side of the primary, and I connected the ground wire of the secondary to one side of the secondary coil so that there would essentially be no current flow from the function generator. (It still worked without connecting the ground wire at all though). I then ran wires from the secondary coil to a bridge rectifier. For this particular circuit, I didn?t have the cap hooked up but it would easily light LEDs.

There was one other factor I haven?t mentioned that gave me this kind of output. I stuck a 1? x 1? x 0.5? SmCo magnet up against the side of the transformer which seemed to almost double the kicks that appeared on the secondary side of the transformer! Before using the magnet, I was getting something like 35VDC at 11mA max. The only problem is that the same magnet didn?t seem to work on any of the other transformers that I tried it with so I am wondering if it is genuinely causing the amplification of the signal I?m inputting or if it is just affecting the permeability of the core which was doing it. BTW, this was not a toroidal transformer; it was one of those small ferrite cylindrical ones where the coils are completely enclosed inside the middle of it.

When I tried the same experiment with some miscellaneous toroidal transformers I had found, the magnet just seemed to choke the signal rather than amplifying it. HOWEVER, I must say that I didn?t spend a lot of time playing with the magnet so it could be a simple matter of finding the right frequency that works with it. One thing is for sure, the magnet under the right conditions is definitely doing something good to the circuit.

As soon as I get the chance, I?ll post a diagram of my setup and specs as well as some photos of what I did.

@Dave,

VERY Nice controller circuit! I have been asking around for a while now trying to figure out how to create the 90 degree phase shift to run the rotating magnetic fields. After seeing your circuit diagram, I immediately went out and got all the needed electronic components to make your controller. What is the operating frequency range of your setup? Any idea how much power it draws from the battery to run?

About the kicks you are observing; as far as I understand, they are electrostatic in nature and occur when you tap the leads because the electric field that abruptly appears in the wire gives the electrons an abrupt ?kick? which makes the big spikes. But if you think about this, that is the power that we are looking for. Tesla experimented with this very effect with his spark gap experiments. The abrupt starting and stopping of the circuit is the key here. And from my experiments, I realized that I didn?t even need to input any current into the circuit to create the spikes. Anyone can see this simply by taking a simple coil, hooking a scope probe to one end and tapping the other end on the positive terminal of a battery. The voltage spikes I?ve gotten from doing that have always been way over the range of the screen! So if you use? say a MOSFET and switch a battery in and out of the circuit into a coil (not draining the battery just switching the voltage potential on and off), then you can actually create an oscillation in the coil at the right frequency. And in the case of my 1:1 transformer, for some weird reason, at the sweet spot, the voltage on the primary could be amplified up to 4 times on the secondary. Though the current output on the secondary may be quite small, the fact that there is any current at all when I am not inputting any current is an interesting effect in itself.

Jason!

I have tried to perform a simlar test as you.  I have tested a torroid with another coil rapped around it at 90 degrees.  Then I have tested sine and square waves.  I am surprised to find that square waves can induce a perfect sinewave in the second coil, but a sine wave on the input just makes a small mess on the output.  Also I have only few turns on the output, yet I can measure better voltage than the input.

I have tested the output by loading with 1ohm/5watt non-inductive resistor, the results can be seen below.  By the way, I forgot to test with input ground floating, will try that later!

For better tests I will need to build a square wave pulse circuit at the resonant frequency (determinded by scope sweep), then I can run off a battery and measure DC power used on the INPUT to I can compare easier.

Please note the input signal is in RED, the output in BLUE.

(note- first pic should say unloaded, not inloaded)


Regards,

Dave.

Hi Dave,

Great! I?m glad to know that someone else is getting the positive results that I have been seeing. I can give you some more tips for finding the ?sweet spot? for your coil. As you sweep through the frequencies with the square wave, you will notice that after a while, the square wave itself will turn into a sine wave at a high enough frequency (usually up in the 100?s of MHz though). But right around that time, is when I have seen the output voltages jump up to 4 times as high as the input. By the way, what kind of square wave are you using? A 0 DC offset wave or some other value? And what was the frequency you pulsed it with?

I would love to see a video about the compass spin up inside the center..

Hey Stefan,

I would love to see that video too, but I have found a video about Tesla on Google and in one scene 15 minutes into it. They show an exhibit where a small polyphase generator is turned by hand which feeds the current into one of Tesla?s toroidal stators. It has a big compass needle in the center and when they rotate the generator, you can see the rotating magnetic field make the compass needle spin:

http://video.google.com/videoplay?docid=956328325858405664&q=Tesla&hl=en

i think of it's kinda frequenty switch

but i could be totally wrong here just "spinning" my mind.

greets marco



Marco, I think you might be onto something here  :). Even if what we are seeing from the videos is just an optical illusion, having the asymmetric geometry could definitely work in our favor. Think ?frequency slamming? The rotating ?globs? of pulses in the device can get more and less concentrated as they circulate. This could simply help to enhance the interference of the frequencies.

For now we can only have theories about Steven Mark's device. Regardless where it gets the energy from there will always be heat generated by the current in the wires.

If I had but one request for legitimate "free energy" device inventors it would be the following ->

Please, could you please just get a simple 50 cent thermistor. All you need is connect the thermistor to a scope or multimeter. I have a $10 digital multimeter and a cheap thermistor that can measure temperate changes of just 10mW in a 3" iron toroid. In other words, if there is just 10 mW of energy being removed/added from/to the 3" iron toroid then I can sense it.

The thermistor only needs to make contact with the magnetic material. You can test both the PM or core in any experiment.

Hey, this request is on my Christmas list. :)

Paul Lowrance


Hi Paul,

My multimeter can measure temperature with the probes. The next time I do some tests with my transformer, I will measure it to see if there are any changes in the temperature.

Hello all,

thanks Hartiberlin

I?am wrighting this post the 4th time (trouble with the network im my company)

Now please take your time and reed this:

In my earlier post I have described my setup of my TPU. After I burned a lot of BDX33C transistors I decided to use a TIP 151 transistor.With this transistor the output voltage rised to 470-480VDC or 880VAC! My meter on the power supply showed me +12V and almost no current. This I call resonance. The frequency was 70-80 kHz. Of course I can also see the harmonics. How? At resonance my meter shows me peak voltage and if I change the frequency at a lower or higher frequency I have again a peak voltage but not so high as in the resonant frequency.

What happened?

Lets see the values for the transistors:

BDX33C = NPN DARL.+DI, 100V, 10A, 70W, >200MHz, B>750
TIP 155 = NPN DARL.       350V,  7A,  80W, >10MHz , B>150

As you can see the difference is in the voltage and in B (current gain). Frequency is not critical. For myself that means that I have to find transistors with very high B and voltage.This is very important because with this transistors we have to build our 2 oscillators. How I know that there are 2 of them? In an earlier post I saw pictures of a TPU and I saw 2 oscillators (2 little coils, 2 yellow condensators 2 mikrofarad/2000V, 2 large electrolytes, resistors and one or two heatsinks for the transistors).

And now someting new:
 DISCLAIMER

I CANNOT TAKE ANY RESPONSIBILITY FOR ANY ACCIDENTS OR INJURIES THAT OCCUR FROM ANYONE TRYING TO REPLICATE MY TPU!! YOU RECREATE MY SETUP OF THE TPU AT YOUR OWN RISK.

What?s that??

In my earlier post I said that my TPU has 3 horizontally coils and one coil wound vertically through the donut.
Yesterday I wound an additional coil horizontally around the TPU and connected the pulsing transistor...
 
What happened?

In the first moment the voltage goes up to 500V and then every second 1V up to 1100VDC!! The AC I cannot measure. As I have no compass I stole from my wife a needle. I magnetized it and it always hangs over the TPU. This needle was "sleeping" until now. At low frequencies 1-10Hz this needle is jumping up and down and that means, I have a rotating magnetic field. Every change in the frequency changes the current through the coil and the magnetic field is weaker or stronger. Now I can "see" this field! In one moment the magnetic field goes to heaven and when I change the frequency the field goes to the earth. In this way I can totally control the magnetic field!
My setup works at a frequency of 4-6kHz (remember, no scope)
The meters on my power supply shows +12V and a little current. My function generator is set at 1VDC output and can handle only low crrents.
Last night I was playing with my TPU and trying to get better results.
I have a large capacitor (4microfarad/430V) connected from the minus to the ~leg of my bridge rectifier. To get more power I changed the capacitor with a 10 mikrofarad/100V. What happened? I had no time to look to the meters because I had every 1 second a loud bang from the capacitor! All the electronics didn?t notice this. Of course I changed the cap again. What is the current to destroy a capacitor? In kV!!

While I was working on the TPU I touched one leg of the rectifier. WOW! In this little piece of copper is so much energy stored that I will never forget this. Then I understood: the coil builts up the energy slowly (1 second) but releases it very, very fast. Like a very large electrolyt. In this moment I?am thinking of Tesla (genius) and his device to capture energy from the environment. With his plate he grabbs the energy and with a condenser stores it and then discharges very quickly into a load.
Meanwhile I noticed that my setup of the TPU is a horror!!!
Why?
As my monster showed me his power I took a faze probe (a little screwdriver with a little lamp in)(Probierstift) and saw that it lits on all 4 legs of the bridge rectifier and that means that the rectifier must be removed!
The transistor is wrong! I need a transistor with a high B and this is a MPSU transistor with B = 10000 and then connect him to a transistor that can handle hundreds of volts.
The control coil could be longer and the wire 0,5mm ....

I think you have enough for today.
Please excuse me if I was boring you but I only want you to help a little if I can.

Regards
Otto
P.S. I hope I figured ot how to post my shematic!


Otto,

That is amazing results you are getting there! Please post some pictures and a circuit diagram of what you did. I would love to see if I can get the same results as you.

God Bless,
Jason O

gn0stik

  • Guest
Re: The Master Of Magnetics "Steven Mark"
« Reply #669 on: September 22, 2006, 06:19:06 AM »
Wow, this thread is moving along quite nicely. We finally have some builders in here. I have neglected for a long time, I got distracted after I started my own site I guess. Tao, it's come a long way since it was basically, you, me, and a few others working towards this. The thread is massive now. I'll go back through a bit and show some things we thought were important back in the day.

Here's the deal however. I see some frustration growing, and I can see why. Folks, if you want to know the basics of this thing it's all in this thread, right down to coil diagrams, and 3d renderings. What we have gathered from SMs posts, and what you are showing to be true via experimentation jives with what we theorized months ago. If any of this is a mystery go back into the thread a ways.

I'll post more in a bit.

gn0stik

  • Guest
Re: The Master Of Magnetics "Steven Mark"
« Reply #670 on: September 22, 2006, 06:52:26 AM »



COULD IT BE that Iron wire or bailing wire, being magnetic wire, is able to increase this lag time and allow the radiant discharge only?

Dave.

@Dave, look at around page 100 of this thread, we have speculated that this is exactly what it's for. We need a control coil with a high rise time at penetration and slow relaxation time. Which means a material with good conductivity, but relatively high resistance. Soft iron, siSteel, etc. provide this. You can find this kind of wire, not only in bailing wire, (which I have found in soft iron at home depot), or you could use a thinner version which is already shielded, which is used in flower arrangements, etc.

I have a feeling that a thicker grade wire will produce better results however.

The coil arrangement we came up with earlier in our theorizing is as follows.

(http://www.overunity.com/index.php?action=dlattach;topic=712.0;attach=1532;image)

This is based on the info that Tao posted earlier that came from SM.

Quote
It is three separate coils of multi strand copper wire laid one on top of the other, not interleaved. Three is important. You can do many things with three coils. You can run them in parallel, you can run two in series and one in parallel, or etc.
You can run a separate frequency into each coil for better control on large power units if need be.
The control wiring is vertically wound in several segments around each of the horizontal collector coils. Other control wires are wound around all of the horizontal collector coils together.

So you see, we have determined that the collectors are wound horizontally around the circumference, and the control coils (NOTE PLURAL) are wound VERTICALLY through the axis.... this from SM's own words.

One thing that is missing from the diagram above is the little tidbit about "the control wire is vertically wound in SEVERAL SEGMENTS around EACH of the collector coils.

So each collector coil being wound around the circumference then has several smaller control wires wound through the axis vertically, perhaps in series. Then the collectors with their respective control wires are stacked, and connected(two in parallel, one in series), and then a tertiary control winding is wound around all of the previous coils, consolidating them into one cohesive unit.

I'm not sure what Tao meant about his "faulty arrangement", or whether or not this arrangement is what he meant.

Boy I wish we had some of the old regulars around here for continuity's sake. Bob, Dean, etc, were all good contributors.

@Otto: is this arrangment even remotely like what you are testing? Just interested in how you are acheiving your results.

@JDO: I'm excited about your results as well, however, I have to say that your frequencies, your "sweet spots" are completely unexpected. Of course sweet spots will change with diameters, wire lengths, and coil arrangments as well as materials. I'm interested what those sweet spots would look like with an arrangement like I have outlined.

It seems you all have a piece of it. Now let's get them all together in the same unit.

Keep up the good work guys.

Regards.
Rich (gn0stik)
« Last Edit: September 22, 2006, 07:16:46 AM by gn0stik »

otto

  • elite_member
  • Hero Member
  • ******
  • Posts: 1215
Re: The Master Of Magnetics "Steven Mark"
« Reply #671 on: September 22, 2006, 08:05:43 AM »

gaspo100

  • Newbie
  • *
  • Posts: 8
Re: The Master Of Magnetics "Steven Mark"
« Reply #672 on: September 22, 2006, 10:52:52 AM »
Edit: Scraped, irrelevant.
« Last Edit: October 22, 2006, 04:04:42 PM by gaspo100 »

cap100nf

  • Newbie
  • *
  • Posts: 12
Re: The Master Of Magnetics "Steven Mark"
« Reply #673 on: September 22, 2006, 12:39:27 PM »
Hi all

I have followed the SM discussion since it started. I?ve been thinking a lot of the hints we got from Steven Mark. Here are some of my thoughts, so far I?ve not been able to do any experimenting my self, in lack of time. But hope to get time to start in about 2 month or so.

Harmonics, in an electrical system, are currents created by non-linear loads that generate non-sinusoidal (non-linear) current waveforms. These current and voltage wave forms operate on frequencies that are in multiples of the fundamental 60hz frequency. That is, the fundamental frequency is at 60 hertz, the 2nd harmonic is at 120hz frequency (60 x 2), the 3rd at 180 hertz, and so forth. Harmonics are principally the by-product of switch-mode power supply technology where AC is rectified to DC, and back again. In the process, a capacitor is charged in the first half-cycle, and then discharged in the next half-cycle, in supplying current to the load. This cycle is repeated. This action of recharging causes AC current to flow only during a portion of the AC voltage wave, in abrupt pulses. These abrupt pulses distort the fundamental wave shape causing distortion to the various harmonic frequencies.

Harmonic currents and voltages produced by single phase, non-linear loads which are connected phase-to-neutral in a three phase four wire system, are third order, zero sequence harmonics (the third harmonic and its odd multiples - 3rd, 9th, 15th, 21st, etc., phasors displaced by zero degrees). These third order, zero sequence harmonic currents, do not cancel but add up arithmetically on the neutral bus, creating a primary source of excessive neutral current.

He also stated that there is a heat problem, then this K-Factor pops up in to my mind. The K-Factor is defined as a ratio between the additional losses created by the harmonics and the eddy losses at the rated 60 Hz. This factor is used to specify the size of the transformer to meet the magnitude of the harmonic load in the circuit. This because the Harmonics create a lot of eddy current that will generate heat.

If we inject a ?kick? at every multiple, at right time. It should be possible to make the kicks to join in to a big kick.That could be repeated to you have many big kicks.  Mark says it?s like a garden Water pipe, if you lift it up you start the flow, then to keep it flow we need to ?squeeze? in sequence too keep it flowing in right direction. The squeezing can be done by injecting pulses, by sequence via the controller windings to make a flow. The interesting gyro effect could be because a strong interaction with the magnetic field of the earth core, or that a strong rotating field is established with possibly could give this gyro effect.

With Regards

Kent /

sergio007

  • Newbie
  • *
  • Posts: 11
Re: The Master Of Magnetics "Steven Mark"
« Reply #674 on: September 22, 2006, 02:45:39 PM »
Just to add comments to cap100nf,  and for those not understanding what he say.  ;)

If you want to know what cap100nf talking about,  just take a look of this : http://en.wikipedia.org/wiki/Power_factor to learn more if some of you didn't know this.

We call this power apparent power : http://en.wikipedia.org/wiki/Apparent power

Normally wiht electrical product, we dont like this power. Why?  Because we can not use this power and it's more trouble.  Example is we can mesure this power but not use it to power motor then the consumer will pay this power but without use it. Another trouble is if you have apparent power  in your circuit, you must transport it, then you need bigger wire, bigger transformer, then a lot of added cost, ect.  :-\


It's the reason, normally we don't like it and want to correct the power factor.

For harmonic, is the same think but this time like cap100nf said this time it's because of the peak coming from the fondamental 60 hertz here in america 120hz,180,240hz and up,   or from any frequency like 50 hz in Europe if you like or if you like to generate any cycle added multiplier. Each king of transformer add some kind of dephase and depend of the circuit used (Some need curent in the begining of the cycle for exemple) add harmonics.
 

I don't know if the power production from Mark is related to this
, but I just wanted to add coments on cap100nf comments.

I wich you Good luck, it will be fun if this work since it will change a lot of think ! And we say in french Merde to wish someone good luck !    ;)



Alp
Sergio

PS, One other trouble this power produce, since we must transport this power, on bad effect is this power have bring a lot of heat in transformer and wire if they are not enought powerfull.  It's the reason now transformer are rated in VA (Volt*Ampere) This include apparent power more the real power Watts.