Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: First electrical power output from a Pyramid  (Read 549214 times)

Thomas_Trawoeger

  • Newbie
  • *
  • Posts: 27
Another short UPDATE:-)
« Reply #195 on: November 22, 2007, 04:04:09 PM »
Hello Community
we are working still on the website, and we hope to get it stable till this weekend.
Please do not register now, and don?t post messages in the Forum.
We have to change plenty of things, and so a lot of registrations could be lost!
If the Websites goes OFFLINE in the next hours or Days, you should not get panic :-)

Maybe it?s necessary to change the webscripts. We want to have the website stable if we start, and so we try different systems.

You can be shure, that we will fix this problems as soon as possible..
greetz , tom

@tigrotto: there is no chemical distruction inside the pyramide. Only the Coppertubes in the base get a little agressed by the salt.
the pyramide?s max running time was 1728 hours. (72 days) After this period we stopped the V12, because we had to disasemble it very quickly :-)

Tigrotto

  • Jr. Member
  • **
  • Posts: 80
Re: First electrical power output from a Pyramid
« Reply #196 on: November 22, 2007, 04:08:28 PM »
@ all:
Please, read attentive:
Graphit rods have not to touch the Salt-water!!!!
If my german is not wrong!
So, it make no sense speaking about Graphite-Salt-water-Copper!!!!
If , again , graphite , don't touch Salt-Water, then what's the logic behind the "battery graphite-Salt-water-copper"?????
See please, there is a small hole on the downside of the assembly , preventing the water not to touch the graphite rods!!!!
Approfitating : Question for all of us:

The assembly is however strange because, if I'm not wrong, the 6 point ( see please the Skizze2 ) have to be connected on a plate of the small ( 25mmx140mm) capacitor, the other its plate ( of this 25mmx140mm) is to be connected to the : Earth+Pyramid Mettalic Frame.
Is this correct this my understanding?
This would mean that the assembly "hanging" at 1/3 height of pyramide is electrically connected in ONLY one point ( point 6 on Skizze2) ( this would be (+))! If this my understanding is true, this is the point where is hardly to understand this "circuit"
Pay attention: I don't dare to ask this Thomas, but you, as my German is not very good !
Regards to all
Tigrotto

karl

  • Jr. Member
  • **
  • Posts: 75
Re: First electrical power output from a Pyramid
« Reply #197 on: November 22, 2007, 06:15:09 PM »
Hallo Pese,
die Ventilatoren ziehen aber ganz sch?n Strom.
Ich glaube 4WDC@12V ist da normal. ?ber 1000 Stunden mit nur 1V kann ich mir fast nicht vorstellen.
Vielleicht eine kleine Vorspannung die als Sourcedipol eingesetzt wird.
Interresant ist aber zu wissen wie der Wissensschatz zustande gekommen sein soll.
Das geht mich aber nichts an.
Das Jonglierprinzip wird ja gerade induziert (micro TPU).
Eine Schwingquelle (nicht die Schwingkammer) kann nat?rlich auch wenige freie Ladungstr?ger sehr oft bewegen.
Die Anregungsrichtung ist dabei interresant.
Ein Energ8iewirbel im Zentrum kann nat?rlich einen flie?enden Strom als Muster einpr?gen.
Vielleicht eine Art hom?opatischer Elektronenanreger.
Deine Kritik ist berechtigt.
Time will tell...

pese

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 1597
    • Freie Energie und mehr ... Free energy and more ...
Re: First electrical power output from a Pyramid
« Reply #198 on: November 22, 2007, 08:43:39 PM »
Hallo Pese,
die Ventilatoren ziehen aber ganz sch?n Strom.
Ich glaube 4WDC@12V ist da normal. ?ber 1000 Stunden mit nur 1V kann ich mir fast nicht vorstellen.
Vielleicht eine kleine Vorspannung die als Sourcedipol eingesetzt wird.
Interresant ist aber zu wissen wie der Wissensschatz zustande gekommen sein soll.
Das geht mich aber nichts an.
Das Jonglierprinzip wird ja gerade induziert (micro TPU).
Eine Schwingquelle (nicht die Schwingkammer) kann nat?rlich auch wenige freie Ladungstr?ger sehr oft bewegen.
Die Anregungsrichtung ist dabei interresant.
Ein Energ8iewirbel im Zentrum kann nat?rlich einen flie?enden Strom als Muster einpr?gen.
Vielleicht eine Art hom?opatischer Elektronenanreger.
Deine Kritik ist berechtigt.
Time will tell...
Deie Ventilatoren habeb ?blicherweise 9 bzw 12wat in der Gr?sser wie im Video.
Nur kleine CPU L?ftermotoren sind ab ca 4 Watt.
Wenn hier (irgendwo in der Cu Salt Grafit Konstellation die 0,5 Volt erzeugt werden
hat das nichts mit dem "gelieferten Strom zu tun ! Wenn dem so ist (spekulativ) dann
dient das nur um die "Erfindung" an laufen zu bekommen. (Erregung /Oszillation und wie auch
immer das passiert . Wir werden es abwarten , oder durch eigene Experimente und laborieren
das herausbekommen da mit der Funktion der ersten selbstgebauten Ger?te sicher JEDEM Weiterentwicklungen einfallen.
G.P.

P.S. e#Es kann schon sein , dass (wie Du meinst) hier die Vor-nung als "Source",
dient. es kann sein dass ungleichlange Grafits?be , ein "anschwingen" erleichtern,
(so wie man das bei Inverterschaltungen auch gerne macht um ein leichteres
Anschwingen von Oszillator-Gegentakt-Schaltungen , schaltungstechnisch zu erzwingen.
Aber , wie gesagt "alles rein spektulativ" , denn lernen kann ich wie Jedermann , imm noch.
---

pese

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 1597
    • Freie Energie und mehr ... Free energy and more ...
Re: First electrical power output from a Pyramid
« Reply #199 on: November 22, 2007, 09:03:01 PM »
 .
« Last Edit: November 22, 2007, 09:39:04 PM by pese »

Tigrotto

  • Jr. Member
  • **
  • Posts: 80
Re: First electrical power output from a Pyramid
« Reply #200 on: November 22, 2007, 09:29:35 PM »
Apologize Thomas,
i didn't read your message and I posted a question on site's forum!!!
OK: Lesson 1: Some for patience!!!
Thanks,
Tigrotto

pese

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 1597
    • Freie Energie und mehr ... Free energy and more ...
Re: First electrical power output from a Pyramid
« Reply #201 on: November 22, 2007, 09:38:14 PM »
 
Deie Ventilatoren haben ?blicherweise 9 bzw 12watt in der Gr?sser wie im Video.
Nur kleine CPU L?ftermotoren sind ab ca 4 Watt.
Wenn hier (irgendwo in der Cu Salt Grafit Konstellation die 0,5 Volt erzeugt werden
hat das nichts mit dem "gelieferten Strom zu tun ! Wenn dem so ist (spekulativ) dann
dient das nur um die "Erfindung" an laufen zu bekommen. (Erregung /Oszillation und wie auch
immer das passiert . Wir werden es abwarten , oder durch eigene Experimente und laborieren
das herausbekommen da mit der Funktion der ersten selbstgebauten Ger?te sicher JEDEM Weiterentwicklungen einfallen.
G.P.

P.S. e#Es kann schon sein , dass (wie Du meinst) hier die Vor-nung als "Source",
dient. es kann sein dass ungleichlange Grafits?be , ein "anschwingen" erleichtern,
(so wie man das bei Inverterschaltungen auch gerne macht um ein leichteres
Anschwingen von Oszillator-Gegentakt-Schaltungen , schaltungstechnisch zu erzwingen.
Aber , wie gesagt "alles rein spektulativ"  ---
 
 
Hallo Pese,
die Ventilatoren ziehen aber ganz sch?n Strom.
Ich glaube 4WDC@12V ist da normal. ?ber 1000 Stunden mit nur 1V kann ich mir fast nicht vorstellen.
Vielleicht eine kleine Vorspannung die als Sourcedipol eingesetzt wird.
Interresant ist aber zu wissen wie der Wissensschatz zustande gekommen sein soll.
Das geht mich aber nichts an.
Das Jonglierprinzip wird ja gerade induziert (micro TPU).
Eine Schwingquelle (nicht die Schwingkammer) kann nat?rlich auch wenige freie Ladungstr?ger sehr oft bewegen.
Die Anregungsrichtung ist dabei interresant.
Ein Energ8iewirbel im Zentrum kann nat?rlich einen flie?enden Strom als Muster einpr?gen.
Vielleicht eine Art hom?opatischer Elektronenanreger.
Deine Kritik ist berechtigt.
Time will tell...
« Last Edit: November 23, 2007, 12:23:17 AM by pese »

fritz

  • Sr. Member
  • ****
  • Posts: 424
Re: First electrical power output from a Pyramid
« Reply #202 on: November 22, 2007, 10:59:10 PM »
.... some speculative ideas ...

If there would be a fluctuation lets say in the microwave
range on top of the "quasi-static" magnetic field of the earth -
with (speculative) circular polarisation - and because of the
nature of this phenomenon - the electro-magnetic "role" of
this field would zero out almost everwhere - because of the
topology of this effect - a properly aligned pyramide made of
diamagnetic conductive material may "enclose" a standing
microwave domain within the pyramide - with the capability
to "tap" this effect.
The coil in the center of the pyramide may act as antenna for
circular polarized microwave - the magnet might be needed to
get the proper "focus". Some part of the construction might
act as rectifier - but the rectified signal will look like dc because
of the high frequency involved.
Even a faraday shield should not zero out this effect - due to
the magnetic nature - the microwave domain will establish
inside the pyramide.
Water lines or other conductive large scale effects might influence
the effect due to different (-disturbed) field around the pyramide.
....
Anyway, I think the "nature" of this effect might be close to this
speculation.


Tigrotto

  • Jr. Member
  • **
  • Posts: 80
Re: First electrical power output from a Pyramid
« Reply #203 on: November 22, 2007, 11:00:59 PM »
@all:
Thanks to those helped me to answer this question : where have to be connected the second plate of the 25mmx140mm capacitor ?
The first its plate is to be connected to the frame and to the Earth.
The answer was: The second plate is connected at point A( graphite rod/left side winding coils).
Thomas answered me today as it was a very easy to see solution: not for a physicist , maybe!!!
I tried to accept this solution and i accepted it!
This is why is not easy to understand:
All the internal assembly is connected by means of the only one wire ( point A): this is (+),
minus (-) being Pyramid Frame+Earth.
The 10 plates capacitor is "sandwiched" between two identical winding coils .
The salted-water beneath the 2 graphite rods means simply another two capacitors( and their inductances) : formed as: Graphite/sand-quartz/Copper tube.
All the inside allsembly loks to be an oscillator "communicating " with sorroundings by means of an only one point: A: Skizze2 ( point 6)
Something like this I saw at Tesla's experiment with an electric bulb lightning by means of only one wire!
Again: If I was wrong in understanding the basic circuit, please correct me!
Understanding the phenomena is impossible without knowing how to draw the electric circuit.
Waiting for ahe Flying Bird falling down into your mouth means I think waiting for Thomas's step by step explanation without thinking about the data we still got: V6 documentation!
Thoughts?
Tigrotto

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: First electrical power output from a Pyramid
« Reply #204 on: November 22, 2007, 11:06:33 PM »
Hi All,
here is an edited circuit diagram I did to the Prof. Ovidiu
diagram.

I think this is now the correct version.

The saltwater MUST touch the graphite electrode, but the saltwater must be
only inside the lower part, so the graphite electrodes must not be fully in the saltwater.

Okay, here is the graphics, click on it to see its full size:


Tigrotto

  • Jr. Member
  • **
  • Posts: 80
Re: First electrical power output from a Pyramid
« Reply #205 on: November 22, 2007, 11:29:03 PM »
Hi Stefan and thank for your help you gave not onyl me but also for other of us .
So the graphite rods are "a little bit immersed in Salt-water", it is true?
My German being poor, I understand that the GRAPHITE RODS DIDN'T TOUCH THE SALTWATER!
YOU SAID OPPOSITE , IT'S TRUE?
So, there is a weak, but real electric contact between the two opposite graphite rods, it's true?
Regarding the quartzsand, it fill almost all the internal part of the Copper closed tube, that's correct?
THANKS AGAIN AND PLEASE GIVE ME THIS LAST CONFIRMATION.
I'M CONFIDENT THAT THIS CONFIRMATION YOU CHECKED WITH THOMAS DIRECLTY AS WE TO HAVE NOT YOUR "PERSONAL"OPINION, BUT THE RIGHT OPINION OF THE INVENTOR THOMAS HIMSELF!!!
Tigrotto (Dr.Ovidiu Petria

CLaNZeR

  • Hero Member
  • *****
  • Posts: 1059
    • Overunity.org.uk
Re: First electrical power output from a Pyramid
« Reply #206 on: November 22, 2007, 11:54:21 PM »
Thanks for this Stefan

Cheers

Sean.

Hi All,
here is an edited circuit diagram I did to the Prof. Ovidiu
diagram.

I think this is now the correct version.

The saltwater MUST touch the graphite electrode, but the saltwater must be
only inside the lower part, so the graphite electrodes must not be fully in the saltwater.

Okay, here is the graphics, click on it to see its full size:




hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: First electrical power output from a Pyramid
« Reply #207 on: November 23, 2007, 02:41:36 AM »
Okay, I did now the english translation for the guidance buildingof the pyramid.

As the German text is now also down at Mr. Traw?ger?s website, I include it here also
again:

Bauanleitung
   
   

Bauanleitung: 1 Pyramide 100cm Seitenl?nge!

Auch wenn es ziemlich einfach klingt, aber die Grundmasse der Pyramide spielen nur eine untergeordnete Rolle. Wichtig sind nur 2

Faktoren:

Die Bodenform der Pyramide muss absolut Quadratisch sein.
Die Seitenmasse der Pyramide m?ssen derzeit der Bodenl?nge gleichen*



Ich verwende zur Konstruktion der Pyramide Formrohre aus Stahl (20x20mm)
Die Seitenw?nde der Pyramide wurden zur Leistungoptimierung mit Gipskartonplatten
verkleidet. ( ohne Seitenverkleidung ist die Ausrichtung sehr schwierig)

Seitenverkleidungen aus Aluminium oder sonstigen Metallen funktionieren nicht ?
Seitenverkleidungen aus Kunststoff funktionieren nicht?

An der Pyramidenspitze wird zu Messzwecken ein Lot eingeh?ngt, und anschliessend der
Geometrische Mittelpunkt errechnet. (Schnittpunkt aller Fl?chenmitten-siehe Skizze 1)

Dieser Mittelpunkt ist die einzige etwas schwierigere Aufgabe.

Der Pyramidenaufbau ist gut zu erden! (Messplatzerdung und Massepunkt f?r alle weiteren Messungen!)

Der Aufbau des Energieabgriffes ist in Skizze 2 geschildert.
Mittels Kupferrohr ca. 12mm wird ein U-F?rmiger Korpus hartgel?tet.
2 T-St?cke verbinden diesen Korpus an der Oberseite.

Am Oberteil dieser Konstruktion wird eine kleine Lasche zur Befestigung verl?tet (3) und mittels nicht leitf?higer Schnur so in die

Pyramide eingeh?ngt, dass sich der Pyramidenmittelpunkt genau im Mittelpunkt des Energieabgriffs befindet.

An der linken Seite der Konstruktion wird ein ca. 9omm langer Grafithstab derart eingef?hrt, dass er mittig im Rohr steckt, und keinen

Kontakt zum Rohr hat.
(ACHTUNG! Der Stab muss innerhalb des Rohes frei sein, und darf unten nicht irgendwie
Fixiert sein!)

Anschlissend 9 Windungen Kupferdraht 2,5 mm zu einer Spule wickeln. (Innen-dm ca.25mm) und freies Ende nach unten ablaufen lassen.

An der gegen?berliegenden Seite ebenfalls einen Grafithstab (2-3mm Bleistiftmine) frei in den Energieabgriff h?ngen. (L?nge ein kleines

St?ck l?nger zB. 95mm)



An der rechten Seite ein kleines Loch ca. 2mm in das Kupferrohr bohren. Dieses Loch muss
Etwas tiefer sein als der Grafithstab einsteht!!! (Abstand mind. 2mm)

An der linken Seite wird auch ein ca. 2mm Loch gebohrt (Auch hier etwas tiefer als der Grafithstab einsteht!

An der rechten Seite wird eine gegenl?ufige Spule mit 9 Windungen (2,5 mm CU) installiert.
In Skizze 3 wird der Kondensator n?her erkl?rt!

Der Kondensator soll exakt mit seinem Mittelpunkt im absoluten Mittelpunkt der Pyramide stehen.

Der Energieabgriff muss nun komplett (aber locker!) mit Quarzsand (am besten W?stensand oder Filtersand f?r Schwimmbecken) gef?llt

werden.

ACHTUNG! Beim Bef?llen ist darauf zu achten, dass die Elektroden (Grafithtst?be) keinen
Kontakt zum Kuperrohr bekommen (Multimeter)



Nun wird mittels nicht leidender schn?re der Energieabgriff so in die Pyramide eingeh?ngt, dass der Kondensator genau in der

Schnittmitte der Pyramide h?ngt!

F?r diesen Vorgang die Pyramide nicht ausgenordet aufstellen!!!!!

Nun mit einer Einwegspritze Salzwasser (ca 5%) in das linke untere Loch einspritzen, bis der erste Tropfen beim rechten Loch

herauskommt.
LANGSAM, und nicht so viel, dass die Grafithelektroden in der Salzlauge stehen.

In Skizze 4 wird gezeigt, in welchem Winkel sich der Energieabgriff zur Pyramide befinden soll, und wir die Pyramide eingenordet wird.

Ein kleiner Plattenkondensator ( ca 25x 140mm) mit jeweils einer Platte kann die Leistung der Pyramide vervielfachen. Dieser wird am

Energieabgriff schr?g nach unten verlaufend im Winkel von ca. 40 ? rechtwinkelig zur Pyramide laufend ausgef?hrt.

Von dort erfolgt auch der Abgriff der tats?chlichen Leistung. (AUSGANG!)
(Achtung!! Einen Pol (welcher ist egal) mit der Pyramide verbinden. Dieser Pol wird automatisch Masse -?!?!)

EINNORDEN:
Ein Multimeter anschliessen, und die Pyramide langsam drehen. Sobald die Pyramide die h?chste Spannung zeigt. (Leerlaufspannung ca. 19

Volt) passt die Richtung.

M?gliche Fehlerquellen:
Zuviel Salzwasser: ---- Einfach eine Stunde warten
Zuwenig Salzwasser:--- F?llen, bis Salzwasser rechts austritt
Elektrodenkontakt zum Kupferrohr?Vor dem Bef?llen mit Salzwasser Multimetertest auf Kurzschluss!!!

Weitere M?glichkeiten:
Kondensatorkurzschluss (Vor Montage pr?fen)
Pyramide liefert nicht. Standort ver?ndern, und am besten im Freien probieren.



Pyramid Building guidance

Building guidance: pyramid with 100cm side length!

It sounds rather simple, but the basic dimensions of the pyramid do not play an important role.

Only 2 factors are important:

The ground shape of the pyramid must be absolutely square.


The length of the pyramid upper corner rods must be the same as the base quadrat square rod lengths.
So all frame rods are 100 cm long !


I use for the side rods of the pyramid for the construction of the pyramid steel pipes  (20x20mm).
which are optimized with gypsum-paper boards( plates).


(Without these gypsum-paper boards( plates) the adjustment of the pyramid is very difficult)


Plates made of aluminum or other metals do not function.
Plates from plastic do not function.

At the pyramid point for measuring purposes a plumb bob is hung up, and calculated afterwards the geometrical center
of all the sides ofthe pyramid.


(intersection of all surfaces in their centers -see sketch 1)



To find this exact center of all the pyramid sides is the only  difficult task in setting it all up.



The pyramid must be grounded very well !
(measuring position must be grounded and ground must be connected to the frame for all further measurements!)




The structure of the energy pick-up circuit is described in sketch 2.


From  copper tubing approx. 12mm in diameter we are hardsoldering a "U"-shaped
body.

2 pieces of T-fittings are fitted to this body at the top side.


On the upper section of this construction a small latch for attachment is hard soldered to the copper pipe.

(3) and the whole body is hung with a non conductive cord in such a way into the pyramid that the pyramid center is exactly in the

center of the energy pick-up capacitor.



 At the left side of the Tube approx. a 90 mm long Graphiterod is in such a manner inserted  that it is put centrically into the pipe

and  has no contact to the pipe.
(NOTE! The rod must be free hanging and must not be fixed down there at the bottom... !)


Now wind 9 turns of isolated copperwire 2.5 mm diameter to a coil winding. (inside diameter about 25mm)
and let the free end run downward.


 On the opposite side put likewise a graphiterod (2-3mm diameter pencil rod)
freely hanging into the tube. (length of the graphiterod a bit longer e.g. 95mm)


Bore at the right side a small hole approx.  2mm diameter into the copper tube.

This hole must be somewhat more below than the Graphiterod`s end !!!

(distance at least 2mm)




At the left side also approx. a 2mm hole is bored (also here somewhat more below than the Graphiterod?s end !


At the right side a coil moving in opposite directions with 9 turns (2.5 mm cu) is installed.

In sketch 3 the condenser is explained!

The condenser is to stand accurately with its center in the absolute center of the pyramid. The energy pick-up tubing must now

completely (however loosely!) filled with quartz sand (.g. finest desert sand or filtersand for pools).
NOTE! When filling it is to be made certain that the electrodes (Graphiterods) do not get in contact with the copperpipes (test with

Ohmmeter)

Now hang the energy pick-up tubing in such a way into the pyramid that the condenser hangs exactly in the centerof thepyramid!

Do not set up the pyramid yet for this procedure into Noth South direction!!!!!


Now with a one-way syringe inject saltwater (approx. 5%)  into the left lower hole, until the first drop comes out at the right hole.


SLOWLY inject saltwater until the Graphiterods are standing with their lower ends in the saltwater-sand solution.

Sketch 4 shows, in which angle the energy pick-up tubing is to be connected to the pyramid, and how the pyramid is adjusted to north

south alignment.

A small plate capacitor (approx. 25x 140 mm)where only the plus pole is going through and
the negative pole comes from the pyramid frame  can multiply the power output of the pyramid.


This must be placed  diagonally downward running in the angle of approx. 40 ? right-angled
to the pyramid at the energy pick-up tubing.


From this capacitor also the real output power of the pyramid power takes place. (EXIT!)


(Note: The negative pole must be connected from the pyramid frame to this capacitor
to the other capacitorplate.)


Adjustment of the noth-south alignment:

Connect a voltmeter to the output and turn the pyramid slowly .

As soon as the pyramid shows the highest voltage tension. (open circuit voltage approx.. 19 V) the direction aligment fits.


Possible sources of error:

Too much saltwater: --- Simply , wait one hour until it has run out enough.
Too low volume of saltwater: - - - Inject more saltwater until it drops out of the right hole.

graphite rod to electrode contact: ---check before installation with an Ohmmeter, that this is not the case.

Further possibilities: ------Condenser short-circuit (test it before assembly)

pyramid does not generate power: -----Change Location, try it outdoors.


English Translation by Stefan Hartmann for www.overunity.com


hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: First electrical power output from a Pyramid
« Reply #208 on: November 23, 2007, 02:56:14 AM »
@Tigrotto,
yes, the sand is filled up into the whole copper tubbing,
so the graphite rods are inside the tube all covered with sand,
maybe not just the top of them, where the wires are connected...
this we still need to ask Mr. Traw?ger..
But the saltwater is only injected into the left hole until it drops
out at the right hole, so only the lower parts of the graphite rods
stand in the wet sand-saltwater.
He said too much saltwater is not good...
Just a bit wet sand. So this is basically a galvanic cell and produces around
0.7 to 1 Volt DC voltage.
Maybe this is  just an energizer voltage so the LC circuit resonates..
but normally you need some kind of  active device like a transistor to
control the oscillation...
I don?t yet understand how this thing generates DC voltage at the output
and also this high....19 Volts.. andso much power...

Well, we need to research this.

Regards, Stefan.

Tigrotto

  • Jr. Member
  • **
  • Posts: 80
Re: First electrical power output from a Pyramid
« Reply #209 on: November 23, 2007, 06:59:20 AM »
Hi Stefan,
Congratulations for your great work you did here.
We had the circuit, now, we can think "around" the phenomena:
Facts:
1. The internal circuit is "hanging" in one point only(A), that is not a closed circuit!This looks like a microwave generator!!!
2. The calculated oscillation frequency of the LC assembly is around 8MHz.
3. Extremely strange for a DC source ( as it really is): The "shunt resistance" of the Voltage generator is "Infinite" !!! We "collect" the power from the 25x140mm capacitor! Never heard before , but... it works!
Conclusion : ? ( By now!)