Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: First electrical power output from a Pyramid  (Read 547718 times)

11:11

  • Jr. Member
  • **
  • Posts: 78
Re: First electrical power output from a Pyramid
« Reply #1065 on: July 30, 2010, 02:09:15 AM »

i think that TT's pyramid,
REQUIRED a running/spinning/vibrating computer fan,
to be physically sitting inside the pyramid,
to work.

because the computer fan was creating physical vibration/shaking.
and this physical shaking traveled EVERYWHERE through the pyramid device.

(especially traveled through the copper wires.
because metal loves to conduct sound/vibration)



the computer fan was also creating a loud,
obnoxious whirring sound.

this sound echoed off of the gypsum pyramid sides,
and echoed off of the smooth and stiff floor UNDER the pyramid,
and built up in the middle of the pyramid.
where the copper loop was.

because sound and electromagnetic vibration both echo,
when they run into a smooth and stiff surface.

smooth and stiff,
like the stone block of the pyramids !



the computer fans sound,
was also physically shaking up the copper loop.

so ANY type of electromagnetic vibration,
be it sound, frequency, or anything,
were all building up in the middle of the pyramid.

kicking and punching and shaking on whatever was in the pyramids middle.
exciting the effect,
of whatever was in the middle.



i also suspect that the pyramid had to be charged up,
with voltage and amperage,
in order to work.

and that the electricity generated,
was a percentage,
based off of this "principle wattage".



i also suspect that very low frequency wattage,
was stored in the steel pyramid frame,
on one half of the lower capacitor.

and that high frequency wattage,
was stored in the central capacitor,
on the other half of the lower capacitor.



and that the DIFFERENCE IN ELECTRICAL RESISTANCE,
between low frequency and high frequency,
caused electrons to move away from the steel pyramid,
and towards the copper loop,
as DC wattage.



i think that low frequency wattage built up in the steel pyramid frame,
because the angles of the gypsum sideboards and the floor,
prevented sound/vibration from reaching the steel pyramid frame.

since the steel pyramid frame was not being physically shaken,
the steel pyramid caused the wattage in it,
to be a lower frequency of wattage.


since the copper loop was being SEVERELY shaken,
by the computer fans physical vibration,
by the computer fans echoed whirring noise,
and by the high frequency oscillation circuit
(central capacitor, wire coils, and one graphite rod slightly shorter than the other graphite rod),
the wattage in the copper loop had a VERY high frequency wattage.


i suspect that the sand inside the copper loop,
had the effect of a signal amplifier,
inside a radio.

this signal amplifier was using electricity,
to strengthen the high frequency signal,
at the middle of the pyramid.

this greatly supports my suspicion,
that the higher the frequency of wattage on one side of the capacitor,
and the lower the frequency of wattage on the other side of the capacitor,
the greater the DC electrical potential inside the capacitor.

only it looks like the low frequency and high frequency need more WATTAGE,
as well as a greater difference between high and low frequency,
in order to produce greater DC electrical potential.



i think that in the great pyramid of giza,
this physical shaking was supplied by vibration in the earth.

there are ALWAYS vibrations and sounds, traveling through the earth.
from the wind blowing across the ground.
and from humans/animals walking/running on the ground.

that is why TT said that his pyramids output increased, at some parts of the day.

because there were more cars driving across the ground,
creating more vibration in the ground,
on those parts of the day !



i suspect that the core produces a wattage interest rate,
based on the wattage principle, put into the lower capacitor.

which is why the builders of the pyramid, put TWO kings chamber cores, into the pyramid of giza.

so that the interest wattage output of one core,
would add to the principle wattage invested into the other core !



TT just charged up his ONE CORE pyramid,
with AC wattage from a transformer.

and it slipped his chain-smoking brain,
to tell us that he did so !



i also suspect that the earths magnetic field is involved, in TT's pyramid.

not just because the pyramids gypsum sides are facing north and south.
but because the central capacitors wide faces, are also facing north and south !
and the copper loops wide faces, are more or less facing north and south !




11:11

  • Jr. Member
  • **
  • Posts: 78
Re: First electrical power output from a Pyramid
« Reply #1066 on: July 30, 2010, 05:12:20 AM »


i came up with a revised theory:



1:
the grounds constant,
never ending vibrations,
provide a base frequency.

this base frequency is lower frequency,
at lower wattage.



2:
a tank circuit (two wire coils, a capacitor, etc),
converts the base frequency,
from lower frequency at lower wattage,
into higher frequency at higher wattage.

because the more that the frequency bounces back and forth,
inside the tank circuit,
the higher the frequency becomes.

or something along those lines.



3:
the earths magnetic field,
is attracted into the high frequency.

the earths magnetic field strengthens the HF magnetism.

converting the higher frequency at lower wattage,
into higher frequency at higher wattage.

(the earths magnetic field, is being put to use.)
(like a bull pulling a cart.



4:
a detector,
(a diode and a crystal),
(or the 2 graphite rods in the sand),
convert the higher frequency at higher wattage,
into physical sound.



5:
what amounts to a microphone,
converts the physical sound,
into usable voltage and amperage.

because a microphone is a generator that vibrates,
instead of a generator that spins.

TT SPECIFICALLY called the central capacitor, a "condenser".
as in, a CONDENSER MICROPHONE !!!!

http://en.wikipedia.org/wiki/Microphone#Condenser_microphone



6:
i suspect that it is necessary,
to convert the high frequency at higher wattage,
into physical sound,
so that the physical sound can vibrate the core.

so that the core can have a higher frequency,
with which to attract/trap more of the earths magnetic field,
to increase the wattage,
to create more sound,
to convert into more electricity.



it is the difference between making a bull pull your cart once,
before turning the bull into a hamburger,

compared to making the bull pull your cart 10,000 times,
before turning the bull into a hamburger.



if they skipped the step,
of turning the high frequency at high wattage,
into sound,
than they would only get golden egg from the goose.

but if they convert it into physical sound,
they can get countless thousands of golden eggs from the goose.



7:
i still suspect that it is necessary,
to charge up the pyramid with voltage and amperage first.

so that there will be something to create enough physical sound,
to create enough physical vibration,
so there will be enough high frequency at enough high wattage,
to attract enough of the earths magnetic field into the system,
to get the process started.





11:11

  • Jr. Member
  • **
  • Posts: 78
Re: First electrical power output from a Pyramid
« Reply #1067 on: July 30, 2010, 06:34:19 AM »



http://en.wikipedia.org/wiki/File:Common_crystal_radio_circuit.svg


in this diagram,
the ground might as well be the negative terminal of a power source,
and the antennae might as well be the positive terminal of a power source.

the selected frequency bounces back and forth,
between the variable capacitor and the wire coil.

whenever the frequency passes by the negative ground and/or the positive antennae,
the selected frequency is strengthened, by the charge.


if you replace the negative ground with the negatively charged north pole,
and the positive antennae with the positively charged south pole,
than the earths magnetic field is strengthening the wattage,
of the selected frequency !!!



the above supports my suspicion,
for how TT's pyramid,
is using high frequency electromagnetism,
to include the earths magnetic field,
into the pyramids wattage.

to ultimately turn the earths magnetic field,
into usable electricity.



a positive terminal and a negative terminal,
have been clearly demonstrated,
to strengthen the wattage of a high frequency electromagnetic wave.

if the earths magnetic field can move a compass needle,
than why can't the earths magnetic field increase the wattage of a frequency wave?




11:11

  • Jr. Member
  • **
  • Posts: 78
Re: First electrical power output from a Pyramid
« Reply #1068 on: July 30, 2010, 07:20:45 AM »



the sand turned electricity,
into physical sound.

and the sand was inside the copper loop.
so the sound caused the copper loop to vibrate violently.

the sound was in the gigahertz range.
so nobody was able to physically hear it.

which is why nobody,
not even TT,
noticed the importance.

if someone had been able to hear the sound,
than it would have sounded loud and notable.
given how much voltage and amperage was being turned into sound.

most of the pyramids wattage was likely converted into sound,
in order to keep the frequency high.



the magnet was physically attached to the copper loop.
so the magnet and its magnetic field,
were also vibrating violently !

the magnets magnetic field was able to induct into something,
since it was constantly moving back and forth.
even if the back and forth movement was extremely short/small.



the magnets magnetic field definitely would have been inducting into the copper loop,
and likely into the left graphite rod.

if a magnetic field was inducting into one graphite rod,
but not into the other graphite rod,
than would that have caused electricity to more towards one graphite rod,
but not towards the other graphite rod ?

to create a strong, aggravated, diode effect ?



the magnet on the copper loop,
was definitely acting like the magnet on a generators wheel.

don't they put magnets into microphones,
so that the magnet shakes when someone speaks into the microphone ?
so that the magnet acts a generator that vibrates,
instead of a generator that spins ?



the person who said that the magnet was unnecessary,
must have been a disinformation agent.
who was pretending to be TT.



11:11

  • Jr. Member
  • **
  • Posts: 78
Re: First electrical power output from a Pyramid
« Reply #1069 on: July 31, 2010, 03:51:50 AM »



http://www.youtube.com/watch?v=aoQohr4k4Rg

this inventor used wind,
to make a magnet vibrate,
inside a wire coil.
to create wattage,
inside the wire coil.



it would have been more efficient,
to turn electricity into sound, like a radio does.

and have the sound shake the magnet back and forth.
so that the magnets magnetic field,
is inducted into the wire coil.



it is clear that in TT's pyramid,
the magnet was shaking back and forth,
due to electricity being converted into sound.

i suspect that the magnets poles were facing up and down.
so that when the magnets magnetic field was inducted through the copper loop,
the effect was that one pole of the magnetic field,
passed through end of the wire coil,
and the other pole of the magnetic field,
passed through the other end of the wire coil.



so that TT's magnet,
was aligned with TT's wire coil !
EXACTLY like the magnet and the wire coil in the above video were aligned !

like this:


                   - TT's magnet  +

       <---< 8 gigahertz of shaking! >--->

                   - TT's wire coil +



i took a close look,
and it appears that the pipe that TT's magnet rested on,
was mainly being held up,
by the thick copper band,
that was attached to the lower capacitor.

so that the magnet and its small segment of pipe,
were able to mostly move/vibrate freely,
of the copper loop and its wire coil !



                         pipe
                    -  magnet +

    <---< 8 gigahertz of shaking ! >--->

                    - wire coil +
                    copper loop



11:11

  • Jr. Member
  • **
  • Posts: 78
Re: First electrical power output from a Pyramid
« Reply #1070 on: July 31, 2010, 09:59:47 AM »



has anyone tried using a DC electricity buzzer,
in place of a computer fan ?

the DC buzzers at radio shack,
put out high frequency AC sound,
even though they run on DC.



i imagine that a small buzzer,
would have a very small amperage requirement.

yet could still severely shake up the wire coil.
so that the magnets magnetic field,
could induct into the wire coil.

especially if you placed the buzzer right next to the wire coil,
at point blank range.



maybe there was the equivalent of a buzzer,
inside the great pyramid of giza ?

the ark of the covenant,
was made of positive gold,
and was full of sand,
and was attached to a diode ?

and the copper loop was all of those things.



if the ark of the covenant,
was being used as a high frequency buzzer,
than that would explain that old legend,
about "the voice of god",
coming out of the ark of the covenant !

because the ark of the covenant,
worked like an electronic speaker,
to create sound !!!




11:11

  • Jr. Member
  • **
  • Posts: 78
Re: First electrical power output from a Pyramid
« Reply #1071 on: August 07, 2010, 01:15:31 AM »



1:
any material with a crystal lattice,
is at least somewhat piezo electric.

because when electromagnetism is passed through the crystal lattice,
the magnetic bonds between the atoms,
expand and contract.

changing the shape of the piezoelectric material,
in a way that moves air pressure (sound).

there for,
the drywall triangles on TT's pyramid,
are piezoelectric.



2:
sound is electromagnetic.

so when sound touches the drywall triangles,
the drywall triangles,
create their own sound.

but the sound of the drywall triangles,
is directly opposed,
to the sound that struck the drywall triangles.

so the sound that activated the drywall triangles piezoelectricity,
echoes back into the middle of the pyramid.



but not only does the first sound echo into the middle of the pyramid.

the sound created by the drywall triangles piezoelectricity,
ALSO echoes into the middle of the pyramid !

with the result being more sound sent to the middle of the pyramid,
than there was sound that left the middle of the pyramid !



3:

TT had what amounted to a microphone,
in the middle of his pyramid.

he had a wire coil,
that was physically shaking back and forth,
inside a magnetic field,
to create electricity inside the wire coil.



4:
the build up of sound in the middle of the pyramid,
causes the wire coil to shake,
much more than the wire coil could otherwise shake.

so the echo of sound off of the drywall triangles,
as well as the piezoelectric sound generated by the drywall triangles,
both contribute,
to the microphones electrical output !



5:
in addition to number 4,
the earths magnetic field,
is passing through the drywall triangles.

which means that the earths magnetic field,
is being converted into yet more sound,
by the piezoelectric drywall !



cletushowell

  • Hero Member
  • *****
  • Posts: 571
Re: First electrical power output from a Pyramid
« Reply #1072 on: August 07, 2010, 02:14:18 AM »
A few watts mines unlimted
ac dc and photon and maxed out my metter
on all three any one want to help
ch@record7.com
utube my earth air battery
and I have string theory but
im a bit in over my head

pyramidtime

  • Newbie
  • *
  • Posts: 8
Re: First electrical power output from a Pyramid
« Reply #1073 on: November 07, 2010, 09:43:33 PM »
So, is this thread dead?  ???  Who is ready to go back to the drawing board?  8)

11:11

  • Jr. Member
  • **
  • Posts: 78
Re: First electrical power output from a Pyramid
« Reply #1074 on: February 11, 2011, 08:58:54 PM »


the steel pyramid frame, would have been positively ionized.

because when a metal is placed next to paramagnetic rock or sand,
the metal loses electrons. because the rock/sands negativity, repels away electrons.


the copper loop in the center, was also very positively ionized.
because the copper loop was full of sand.



one half of the central capacitor,
filled up with the copper loops positive ionization.

electrons (negative ions) were willing to chase,
after the positive ioned half of the central capacitor.

these electrons built up in the other half of the central capacitor.
these electrons were held there, by the positive ioned half of the central capacitor.

but these electrons were willing to move towards any positively ionized metal or water.
as long as there was a conductor connecting the electrons, to the positive ionized metal/water.


the positive ioned half of the central capacitor,
was not physically close enough to sand or rock.

so that half of the capacitor wanted to be ionically neutral.
even though it was being positively ionized, by the copper loops sand.



it is the same with the lower capacitor.
the half of the lower capacitor,
that was connected to the steel pyramid frame,
was positively ionized metal.

and the half of the lower capacitor,
that was connected to the electron-filled core,
was negatively ionized.


the central capacitor's metals, were ionized.
yet negative ions could come into the lower capacitor,
to chase after positive ions,
because the lower capacitor was not close enough to sand or rock,
to repel away electrons.



i have made more discoveres than just the above.
i will post them when i have enough mental stamina.

and after i have used the newfound ignore feature,
to silence those who have nothing but unconstructive mental attacks,
to post.




11:11

  • Jr. Member
  • **
  • Posts: 78
Re: First electrical power output from a Pyramid
« Reply #1075 on: February 11, 2011, 10:07:33 PM »



i suspect that the great pyramid of giza,
worked similar to lord kelvins thunderstorm.

if the pyramid has 2 kinds chambers,
2 grand galleries,
2 separate water reservoirs outside the pyramid,
and 2 of everything else,
than its interior would even LOOK like kelvins thunderstorm.

kelvins thunderstorm having 2 buckets of water,
attached to 2 diagonal metal rings,
attached to 2 sources of dripping water.



both would have used water moving towards a "ring",
then water moving away from a "ring".

but kelvins thunderstorm,
just had a drop of water,
falling past a metal ring.

where the great pyramid,
would have used its ramp pump,
to spurt water towards an electrode,
that was sitting around the bottom of the great gallery.




the ramp pump drove the water upwards in spurts.

if there were about 6 seconds between each pump spurt,
than that would be enough time for gravity,
to pull water down the ascending passage,
and several feet away from the electrode,
before the next spurt from the ramp pump,
forced water back towards the electrode.



it would have looked similar to a wave of water moving up the beach.
then the wave of water being pulled down by gravity,
and back into the ocean.

the constantlywaxing and waning motion, of waves of water on a beach, might have been what inspired the pyramid builders,
to use electrostatic motion.




11:11

  • Jr. Member
  • **
  • Posts: 78
Re: First electrical power output from a Pyramid
« Reply #1076 on: February 11, 2011, 10:39:06 PM »



lightning bolts are created,
when a large number of electrons,
move away from the negatively ionized water in the sky,
and onto the positively ionized water on/above the ground.



the earth ONLY has positively ionized water on it.
the earth repels away electrons.
so that negatively ionized water can never sit on the earth.

for whatever reasons, the sky has negatively ionized water only, in it.

likely because the positive sunlight and the positive ionosphere,
attract so many electrons,
than all the sky's water/moisture,
is always negatively ionized.



lightning bolts are created by electrostatic movement.
just light a wimhurt machines lightning,
is created by electrostatic movement.

yet the lightning bolt can have 50,000 amps in it.
because the water in the sky is always negatively ionized.
and the water on the ground, is always positively ionized.

the unchanging ionization,
of the 2 bodies of water,
give enough time,
for a large number of electrons,
to move from point A to point B,
as high amperage.




the the metal on each wimhurst wheel,
is constantly switching,
between being positively ionized,
and being negatively ionized.

because nothing is forcing one wimhurt wheels metal,
to be negatively ionized only.

and nothing is forcing the other wimhurst wheels metal,
to be positively ionized only.



the wimhursts amperage is so low,
because the wheels change the ionization too fast.

the ionization reverses thousands of times per second, so the electrons are trying to move from A to B to A to B to A to B,
thousands of times per second.



instead of a large number of electrons,
moving away from the negatively ionized metal,
towards the positively ionized metal,
the electrons uselessly hover in the middle.

the electrons hover between point A and point B,
doing nobody any good.



in theory,
if you dumped sand or rocks,
into one of the buckets of lord kevlins thunderstorm,
than that would encourage the water in that bucket,
to be positively ionized water only.

but more electrostatic movement is happening,
the more surface area you would need,
of paramagnetic sand/rocks,
to fully correct the constant switching of ionization.



read my next post for more:



11:11

  • Jr. Member
  • **
  • Posts: 78
Re: First electrical power output from a Pyramid
« Reply #1077 on: February 11, 2011, 10:58:51 PM »


it is said that the ark of the covenant,
sat in the kings chamber.


the ark of the covenant,
was said to be a golden box.
that had a wooden box inside of it.
and the wooden box had a second golden box inside of it.


if the inner golden box,
had an extremely paramagnetic material inside of it,
such as uranium or plutonium,
than would cause the inner box's metal, to become extremely positively ionized.



electrons are attracted,
onto positively ionized metal/water.

if the inner box was sealed from the outside world,
than the outside box would become extremely negatively ionized.



if the inner golden box is ONLY positively ionized,
and the outside golden box is ONLY negatively ionized,
than that would allow large amounts of amperage,
to move from point A to point B.

without electrons uselessly hovering,
between point A and point B,
due to constant ionization switching.



but i think that they left,
the positively ionized inner golden box,
alone.

instead,
they used a massive reservoir of positively ionized water,
that was sitting outside the pyramid,
as the "positively-ionized-only" water/metal.



i have a busy life,
despite having very little income.
so i am not ready to show my incompleted work so far.

but i wanted to share some of the concepts,
that i have recently realized,
during my meditations.



for the sake of us all,
pass along whatever you find to be important.

it takes only the smallest spark,
in even a poorly configured nervous system,
to do something that counts.




hory

  • Newbie
  • *
  • Posts: 3
Re: First electrical power output from a Pyramid
« Reply #1078 on: January 10, 2012, 07:02:34 PM »
Hello Everybody,

Has someone noticed, what Thomas said, and did in the video? He said that in the reactor the inner and outer coil shold have wound in the same direction(cw and cw, or ccw and ccw). I watched the whole movie many times, but I think he wound the inner ond outer coil in opossite direction. (inner:ccw, outer:cw)

Regards.

Schauberger

  • Newbie
  • *
  • Posts: 1
Re: First electrical power output from a Pyramid
« Reply #1079 on: October 28, 2018, 12:37:11 AM »
What happened to this Thread ? Why did the discussion end in 2012 ?
Is there anyone out there who successfully rebuild this pyramid ?

Please contact me , thanks