Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: ENERGY AMPLIFICATION  (Read 3509065 times)

Magluvin

  • Hero Member
  • *****
  • Posts: 5884
Re: ENERGY AMPLIFICATION
« Reply #510 on: October 21, 2010, 05:28:18 AM »
Wow Nieve   That is a huge setup in front of that house.  The neighbors must have been terrified.  =]

Hey Teets.  Ok, that point was sharpened, and thanks.   Modules?  Ok well thats the first I have heard that from you. But you had termed it another way before.   But modules are cool. 

Im a bit lost here but will keep on truckin.  =]   I did have a question, but as I wrote this, I decided it was invalid. =[

I had tried the 2 diodes on a load off of the end of a secondary as shown above, and nada.
Not at high freq, but as the article said, that low voltage and freq could be done also, I didnt get anything.
I thought about it for a bit as to how current could flow through the load in this config.    Lets say a positive or negative phase caused current to flow through 1 diode, through the load, and back out the other diode back into the same wire. I suppose it could happen, like a single wire cable can send multiple signals at once.  But I see the open ended secondaries charge at the time to work against this, in my mind.   hmm   I have some ideas that I want to try to see this effect, so back to the bench.
I hurt my heal today from stepping on a rock the wrong way, and its hurtin.  Im guna get some rest.

I have been desiring being able to put up some vids. I enjoy doing them. But they need some good content.

Man I wish I didnt have to work so much and be able to get more done here. Im trying to give a lot of attn here, but with the move and my brothers bad attitude here, I have to put this aside quite a bit.  Once Im settled, I will have a greater amount of time to think properly also.

My brother is being prescribed aderal and 2 whole zanex each day from a doctor that should be put in prison.. and also a half gal of vodka a day.    It is very hard to deal with him in any fashion.  But Im out of here and wont have these types of distractions.  I pray.  =]

Mags

Tito L. Oracion

  • Hero Member
  • *****
  • Posts: 2203
Re: ENERGY AMPLIFICATION
« Reply #511 on: October 21, 2010, 06:08:32 AM »
Tito,
Quote,:
AND SHOULD ALWAYS BE AVAILABLE TO USE.
----------------------------------------
Does this part mean a battery?
{meaning a battery is VERY important for this]

Chose one.
1. yes
2.No

Chet

Yes in one of my setup, i actually using one 3v button cell.

No in one of my setup, cause i'm using stubblefield or two different metals or galvanic battery.

No again in one of my setup cause i'm using antenna as source.

all in all battery is still much better to use cause it is stable and reliable. and small  ;)

Tito L. Oracion

  • Hero Member
  • *****
  • Posts: 2203
Re: ENERGY AMPLIFICATION
« Reply #512 on: October 21, 2010, 06:23:49 AM »
modules is a set of procedures and function to do some task, that when i go back there it do some gain of at least 1/3 of the power used but because we return a lot of times until a reservoir is full then that's it.  ;D

There should be a validation if it is time to continue or not yet  ;)

Perfect Timing is always needed cause in basketball throwing and throwing are useless if they are not point counted.  ;D

or in assassination, the subject must be there before throwing a bomb.  ;D

 
;D



 

forest

  • Hero Member
  • *****
  • Posts: 4076
Re: ENERGY AMPLIFICATION
« Reply #513 on: October 21, 2010, 07:39:50 AM »
Tito



1. multiple hose have to be special filled or air ?

questions about Tesla igniter

2. high self-induction coil surely have iron core
do we use it:
a) to push a roundabout
b) as a wire

3. I'm using 9V battery to push roundabout, is that able to lock to correct cron timing or is better 2a

ramset

  • Hero Member
  • *****
  • Posts: 8073
Re: ENERGY AMPLIFICATION
« Reply #514 on: October 21, 2010, 03:12:50 PM »
Mags
I can Feel the torment in your posts,It upsets me because I know how powerless you feel about your brother.

I went thru a simular time in my life ,when I was like your brother,there is no escape from the torment in a pill or a bottle,been there done that!

Tell you brother he really can make the rest of his life the best of his life!

I will mail you my # and would be happy to share my experience with him!
Keeping you in my prayers,
Chet
PS
@Mags and ALL
If your not watching this you should be
http://www.overunity.com/index.php?topic=7833.new

400%  ---2700% overunity
independently varified!!!
And Thane, boom boom, Cranky pants, Zilla
Is available !!
I must be dreamin??
« Last Edit: October 21, 2010, 03:45:45 PM by ramset »

Magluvin

  • Hero Member
  • *****
  • Posts: 5884
Re: ENERGY AMPLIFICATION
« Reply #515 on: October 21, 2010, 06:11:31 PM »
Thanks Ram   I appreciate that. ;]

Teets!    So some of the tips you are using programming dialect to describe things.  That helps.
Roundabout = flywheel ?    ;]

Timing.  Can it be automated, or triggered for accuracy according to the operation, or is just fine tuning necessary?  Do you use micro controllers?  PIC


Thanks Teetla.  These things are very helpfull. ;]

Mags

Magluvin

  • Hero Member
  • *****
  • Posts: 5884
Re: ENERGY AMPLIFICATION
« Reply #516 on: October 21, 2010, 06:18:25 PM »
Ram

That is interesting on the transformer.   What if you have 2 toroid cores side by side and looped them together with a primary, then put the secondaries on the outer side of each core, could it do the same?  It might be very simple.

But maybe the cores would have to be shaved to mate with each other to look more like and 8 rather than 00, just from what I see that he has the primary on a much leaner core than the secondary.  Thinkin.

Thanks for the good show. =]

Mags

ramset

  • Hero Member
  • *****
  • Posts: 8073
Re: ENERGY AMPLIFICATION
« Reply #517 on: October 21, 2010, 08:01:58 PM »
All Data On
Thanes device,just posted here!
 http://www.overunity.com/index.php?action=downloads;sa=downfile&id=443
@ Mags
Good to see your Cracking the "Teetsla Cron frozen ice balls Code"

Teets You better be nice to Mags!

Or I'll B&*$t  Y#$&% R&*%) in the eye!

Chet


Tito L. Oracion

  • Hero Member
  • *****
  • Posts: 2203
Re: ENERGY AMPLIFICATION
« Reply #518 on: October 22, 2010, 05:07:27 AM »
Tito



1. multiple hose have to be special filled or air ?

     No: there is no special filled or air; just use them naturally but they
            should be made in an efficient way.

questions about Tesla igniter

2. high self-induction coil surely have iron core
do we use it:

 it depends actually, we can use them for boosting volts and current, its up to us what we want to increase.

a) to push a roundabout
b) as a wire
c) as a dissipater at the same time
d) for strong kicking also
e) all of the above  ;D

3. I'm using 9V battery to push roundabout, is that able to lock to correct cron timing or is better 2a

sorry i don't much get your question or how you make your timing.

First and formost is how you use your source, it must be used in efficient manner and in half life only.

Tito L. Oracion

  • Hero Member
  • *****
  • Posts: 2203
Re: ENERGY AMPLIFICATION
« Reply #519 on: October 22, 2010, 05:09:25 AM »
All Data On
Thanes device,just posted here!
 http://www.overunity.com/index.php?action=downloads;sa=downfile&id=443
@ Mags
Good to see your Cracking the "Teetsla Cron frozen ice balls Code"

Teets You better be nice to Mags!

Or I'll B&*$t  Y#$&% R&*%) in the eye!

Chet

Don't worry i'll be gentle honey  ;D

Tito L. Oracion

  • Hero Member
  • *****
  • Posts: 2203
Re: ENERGY AMPLIFICATION
« Reply #520 on: October 22, 2010, 05:18:54 AM »
Thanks Ram   I appreciate that. ;]

Teets!    So some of the tips you are using programming dialect to describe things.  That helps.
Roundabout = flywheel ?    ;]

Timing.  Can it be automated, or triggered for accuracy according to the operation, or is just fine tuning necessary?  Do you use micro controllers?  PIC


Thanks Teetla.  These things are very helpfull. ;]

Mags

no i'm not using microcontroller.
i'm just using a very simple components as much as possible like what tesla is using in his days. but for the sake of size i'm using some.

nature timing.

Magluvin

  • Hero Member
  • *****
  • Posts: 5884
Re: ENERGY AMPLIFICATION
« Reply #521 on: October 22, 2010, 07:41:05 AM »
no i'm not using microcontroller.
i'm just using a very simple components as much as possible like what tesla is using in his days. but for the sake of size i'm using some.

nature timing.

Using some what?    Nature timing?

Would this be more correct...   i'm just using a very simple components as much as possible like what tesla is using in his days. but for the sake of size i'm using some Nature timing.   =]


Mags

forest

  • Hero Member
  • *****
  • Posts: 4076
Re: ENERGY AMPLIFICATION
« Reply #522 on: October 22, 2010, 10:05:59 AM »
no i'm not using microcontroller.
i'm just using a very simple components as much as possible like what tesla is using in his days. but for the sake of size i'm using some.

nature timing.

Tito

that what I was asking for
I use CD motor and external circuit to manage speed but there is also Adams motor with reed switch way when nature is timing. I wanted to know if I could expect any results when using external circuit OR only nature timing ?

now a nice part  ;D ;D

about hoses  ::) and pushing water inside
a) ordinary one plumber use soft iron pipes  ::)
b) some crazy use strange :P costly pipes (looks like black metal  ::))
c) normal poor guy would use air and handwork but then require high pressure (require?)
d) our good friend otto (R.I.P)said about copper hose

i'm trying to use low pressure now to understand in re do re turn re cursion module 
Tito which one hose is the best in series  for low pressure ?  ;D

high selfinduction coil in Tesla patent has no sec ondary  (has it got ?) ? any gain without it ?

forest

  • Hero Member
  • *****
  • Posts: 4076
Re: ENERGY AMPLIFICATION
« Reply #523 on: October 22, 2010, 10:13:04 AM »
quest song for Dj-Tito  :D

do we use sec ?
just  like
av rap men cop
to make my cap
with more juice
for big top and pike
when each spike is  hike
be cool and nice
strong rap
is going to cap



 ;)

Tito L. Oracion

  • Hero Member
  • *****
  • Posts: 2203
Re: ENERGY AMPLIFICATION
« Reply #524 on: October 23, 2010, 03:59:40 AM »
quest song for Dj-Tito  :D

do we use sec ?
just  like
av rap men cop
to make my cap
with more juice
for big top and pike
when each spike is  hike
be cool and nice
strong rap
is going to cap



 ;)

@forest

             CHEEEEEEERS!  :)

   just teach mags what you have bud.  ;)

That is what i'm saying, in time you got it, then thats the time you realize what i'm saying is right. isn't it?

i think what you need now is a refinement of your design and some correct  materials and places for components and that is i think where we have to be differ if whose the best design ok;  ;D

Just last tip: it is better for our device that it can able to receive or detect signals easily so that the source is stable ok  ;)

No more tips now, just try and think which is best or correct materials ok.


now you have the version one of tesla's amplifier.
the second one is more brilliant. => rolling stone ice just notice how nature works.


sir wattsup is very correct for we have 1 volt forever but that is a long method.
but here is what i say "THERE IS ALWAYS A BETTER WAY" ;D AND "THERE IS ALWAYS A VERY GOOD SOLUTION OF ATLEAST ONE " ;D


bye.  >:(

SO LONG FEL;D