Free Energy | searching for free energy and discussing free energy

Solid States Devices => solid state devices => Topic started by: innovation_station on November 26, 2008, 06:23:30 PM

Title: 3 FREQ TPU controllers AUDIO
Post by: innovation_station on November 26, 2008, 06:23:30 PM
ok well this is the real deal ...

please post controllers here ...  concepts  and builds

i will be posting ...  in here

@gk

can you post a few pics of your controller ..  and i beleave there was another chip mentoined .....     

@bolt could you post the amp curcuits  or even the link where they can be found ..  so a few can build them ...

this unit will do somthing  ;)   we should be able to mix 3 freqs in the enviroment ... via magnetics  controlled by SOUND WAVES 

alomst got my controller all fastened  next the wireing ... i will post some pics and all the materials involved so it can be duplicated EASLY...

the freq gennys were kits from jameco ..  amps kits from cana kit ...  coils will be crossover coils...  plus / minus speeker coils...  we shall see... ;D

if i hook up speekers i will hear the reasult .... aswell as have the magnetics...  and perhaps my speeker coils become my coils of high self induction ie chokes...  ;D

wont be long now...  HIGH SPEED turbine style generators with out moveing parts :)

ist!
Title: Re: 3 FREQ TPU controllers AUDIO
Post by: innovation_station on November 26, 2008, 06:38:54 PM
hey remember the out of phase comment sm made...   hummm  freq 1 out of phase of freq 2  rotation from freq 3

no?

comments?

jason ... you know 2 freqs is tonnes of power... ;) 8) :o   but what if you spunn it


ist! 
Title: Re: 3 FREQ TPU controllers AUDIO
Post by: innovation_station on November 26, 2008, 10:05:20 PM
here is the link for the amps im useing in this controller  they dont say 2 ohm on the page but in the docs they say so....

any how thought i would try em ;)

http://www.canakit.com/20w-bridged-audio-amplifier-kit-ck193-uk193.html

ist

a pic of the amp
Title: Re: 3 FREQ TPU controllers AUDIO
Post by: innovation_station on November 28, 2008, 05:40:04 PM
here is the link to the freq gennys im useing in this unit

http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&storeId=10001&catalogId=10001&productId=20685&


and here is a pic of  the freq genny...
Title: Re: 3 FREQ TPU controllers AUDIO
Post by: innovation_station on November 29, 2008, 04:52:02 PM
there is 9 12vdc light switches in my conrtoller box  3 for on and off of the amps top row ....

3 for on and off of the freq gennys....   middle row....

3 switches for square sine and trinagle wave forms... 

3 volume pots...  for the amps

3 1mohm  pots for the freq gennys
3 50k pots  for ampltude of the freq gennies ..
3 selector switches for the freq range of my gennys .... 

thats it .... 

we can change caps or add more to take the gennys up to higher freqs... ;)

here is a pic of my top plate and lay out of my controller ...

ist
Title: Re: 3 FREQ TPU controllers AUDIO
Post by: innovation_station on November 29, 2008, 05:53:05 PM
here is the rest of the controller i still have a bunch of work to do ...

ill get it done  :)

ist
Title: Re: 3 FREQ TPU controllers AUDIO
Post by: Yucca on November 29, 2008, 09:32:16 PM
Looking good ist! :)

Are you using two pots in series for each frequency, one high resistance for coarse tune and one low resistance for fine tune?

It´s a cool thing for experimentig with, I´d love to build something similar for my lab.

I´m gonna build a phase locked 3 phase system using a shift register (74HC164) on my DIY signal generator so I can have a crack at the spherics system. Will start on that after I´ve made my scalar wave (gravity wave) detector. I've put a pic of my 2 channel sig genny below.

I´ll keep reading about your progress as usual, I Can´t wait to hear about your TPU experiment findings with this great rig! Best of luck in your huntings.

Yucca.
Title: Re: 3 FREQ TPU controllers AUDIO
Post by: innovation_station on November 30, 2008, 01:47:25 AM
nice to see you here yucca

im almost done wireing it all up

i will post a pic here as soon as i finish it ...


ist
Title: Re: 3 FREQ TPU controllers AUDIO
Post by: innovation_station on November 30, 2008, 07:20:35 AM
finally all done it ....   took for ever lol ...   

but its done now  i will test it out tommorow to see if it is in working order here is a pic of it all wired up ...


ist!

Title: Re: 3 FREQ TPU controllers AUDIO
Post by: innovation_station on December 01, 2008, 12:32:18 AM
so i whiped up a coil to play with the audio concept ...  here is a pic all coils are the same the 2 pancakes are same lengths and the crossovers are are all the same ...

here is a pic

ist
Title: Re: 3 FREQ TPU controllers AUDIO
Post by: innovation_station on December 01, 2008, 12:38:57 AM
now the coil needs 3 speekers lol .....  your coils of high sel finduction ...  your chokes ...  but our chokes will be motor coils ;D  i was thinking  between the vertical crossovers at 90 deg..

thoughts...


ist
Title: Re: 3 FREQ TPU controllers AUDIO
Post by: innovation_station on December 01, 2008, 02:32:00 AM
waste no time !!


im on to my next coil ...  i am building out of speeker wire ... 12 n 1  coil

2 big pancakes we will see what happins

i will post a few pics of the coil i want to add steel cores to thease coils...  all wires the exact same length ... 8)  in the vert coils ...

18 ga bifillar speeker  wire   33'3" x 12 coils ...  they will be hooked up in groups of 4 coils  and will operate from 3 freqs....

ist