@  innovation_station
   
Hi from freepow. do u have a schematic or diagram of your charger

You will learn faster , without him ... just ignore ...

Mark

your a LOOSER FAG HOW IS YOUR ASS?

HEY DUM DUM ?

!

TELL ME HOW AND Y MY MOTOR RUNS! 

IF YOU EVER START RUNNING FORWARD ...  MAYBE YOU GET SOME WHERE

MARK!

how bout we talk about why you think you know so much mark !   

how long you had boy friends ... mark ?

oh ya right thats why you know !!!  does his wife know ?

: )

continue to cut me down ill burn you down !

little baby!

you apear to be all cry baby like ...   DOES MY COIL RUN FAST ?  LMFAO!

RUN FORREST RUN ! LEAVE ELECTRONS BEHIND, YOU WILL CATCH  NEW ELECTRONS AT THE END !!! 

here is my newest unit

it is the entire system on 1 board .. 

add a coil and battery holder your done ..

i have 2 caps 25vdc 4700 uf  1 per coil then joined as 1 feed

need a coil ?

: )

ist!

Hi A

Back to work

I read some Dr Stiffler threads and came to some ideas

 First    i did a pancake coil (pix 1)  as you suggested    8 turns  0.5 mm copper    and 0.35 ohms resistance     and 2,5 micro h  inductance

 it works very well

second i tried to use water as transmitter  and it works well  it is simple tap water without any electrolite     To test it i used my diode bridged led with antenna and took the distance where it lit off,  than i put the water container under this distance and plunged the antenna in the water and the led lit up very brightly. (not very clear on the photo but real in my lab)

very interesting anyhow

good luck

regards

Laurent

Very nice job Woopy.
For your pancake coil you might get even better results with plastic coated solid wire.
For me anyway the plastic coated wire worked a lot better than the mag wire.

Great job and thanks for posting your results.

here are a few pics i finished the last aa charger ..

the coil is wound the same as the first one

it works great ..

ist!

i also made a video  chargeing the caps and battery  from .8vdc

this can be called the PRE CYCLE BATTERY CHARGER ... : )

PRE CYCLE B4 YOU RECYCLE ..

: )

now if we can get the stall convertor working on the precycler .. then were all set!

: )

and for my next stunt! 

lol

im going to wind a simple jt 3 turn   same as the magic maker basic .. 

i have gone a head and wound 26ga pickup all the way around the ring leaveing a small space for the 3 turn coil ..

i will not tap back side i will force it out secondary ...

ill add a few pictures   

next i will add the 3 lap 9 turn jt and secondary output wires to the same core so 1 is RUBBING THE ROCK AND THE OTHER IS SPINNING IT !

: )

ist!

btw i built 1 more aa charger the same almost i used 2 twisted pairs bifillar wound 9 turn 3 lap and 1 from each twisted pair become the jt .. so now the generator wires are twisted around the pulseateing jt wires then around the core ..

: )

it worked really good .. 

i used 10vdc 3300uf caps 2 of em in that unit ..  really fast it flys to 8vdc ..  faster than my other 2 but thease caps are a bit smaller ..  this is to be used to fill fireing caps at 8-10 vdc  ..  1 to 1000uf.. 

so now for the next stunt after the last stunt ..

lol

2 jt basic x split core 4 secondaries then a 4 way 8 turn 2 lap 4 wire ..  ontop the secondaries ... : )

maybe tommorow i get to it ...

: )