Author Topic: Tesla 3,6,9 (Read 16130 times)

Mr Magnusson · « **on:** November 20, 2008, 07:32:08 AM »

if you have a circle with a diameter of 18 centimeters, you can calculate the circumference by dividing the diameter of 3 = 6, and then dividing the radius of 3 = 3 then use the radius as a base in a rectangle measuring 3,6,9 then you have a fourth line that will be 9.48 then 3x19 = 57 minus the measure exceeds the radius dimensions of the rectangle 57-0,48 = 56.52 then check it with Pi 3,14

Roger Magnusson

CrazyEwok · « **Reply #1 on:** November 20, 2008, 07:54:56 AM »

Questions...
1. where on earth did you pull a 4th line from?!?

2. What does this have to do with tesla?

3. PI is 3.1415926 from memory (it does go further but this fills most calculators)

4. 19... is that just a random number??? or are you picking a specific Prime number?

5. if your giving 3 measurements to a four sided figure and refering to it as a rectangle i will assume the angles are meant to be 90 deg except for your missing sides?!?

very vague and only works on PI to 2 decimal places...

Mr Magnusson · « **Reply #2 on:** November 20, 2008, 08:34:24 AM »

excuse for my poor English (google language tools).
1.In Sweden a rectangle has four sides.
2.If you only knew the magnificence of the 3, 6 and 9, then you would have a key to the universe. it gave me the idea to expriment with angles.
3. presis but I used only two decimals when I measured the fourth line.
4. you need 19 rectangles to compleet the circle.
5. I am not sure what you mean. but yes line 3 and 6 is 90 degrees to the baseline.

Roger Magnusson

Mr Magnusson · « **Reply #3 on:** November 20, 2008, 08:50:01 AM »

you can try to measure the volume. in this way 9.48 x3x9 . the volume is 3D, so you must remove 3x0, 48 so 9.48 x3x9-1, 44. you end up wit the volume 254.52

Roger Magnuson

innovation_station · « **Reply #4 on:** November 20, 2008, 09:11:54 AM »

Quote from: Mr Magnusson on November 20, 2008, 08:34:24 AM

.If you only knew the magnificence of the 3, 6 and 9, then you would have a key to the universe.

Roger Magnusson

and where did tesla find this out....

the pyramids?

where did tesla look for his answers??

ist

Mr Magnusson · « **Reply #5 on:** November 20, 2008, 09:17:22 AM »

Ist
I rest my case

RM

CrazyEwok · « **Reply #6 on:** November 20, 2008, 09:52:45 AM »

Ok for starters its prime numbers that have the power... 3 and to a lesser extent 4 (base of the pyramids) are the ones most used...

see attached picture with your proposed circle of 18 cm (180mm) and your shape of 30.00mm, 60.00mm, 90.00mm & the computer came back with 94.9mm but thats a small drop...

Now how can i fit "19" of these shapes into that circle? that is how you got 19 right?

I would really like to know how this works and how it could be used for other sized circles???

Mr Magnusson · « **Reply #7 on:** November 20, 2008, 10:15:49 AM »

Now it starts to become intresting.
measuring the volume of 9.49 x3x9 minus 0.49 x3 and then divide by 9 divided by 9

RM

Mr Magnusson · « **Reply #8 on:** November 20, 2008, 10:44:28 AM »

CrazyEwok
I will try to explain with my poor English.
if you add rectangles side by side formed a circle on the inside of the 3-centimeter sides. ok rectangles do not fit 100% but it takes 19 to make up a circle
one more interesting thing http://www.answering-islam.org/Nehls/Ask/number19.html

RM

Mr Magnusson · « **Reply #9 on:** November 20, 2008, 11:21:34 AM »

in the bible's creation story,(swed. translationI)read the following figures 30,10,5
30 divided by 3 = 10. 15 divided by 3 = 5

Mr Magnusson · « **Reply #10 on:** November 20, 2008, 11:49:49 AM »

I'm no mathematician but it`s very intresting to count in this way and compare in relation to Pi

RM

CrazyEwok · « **Reply #11 on:** November 21, 2008, 12:57:56 AM »

using that particular shape and basing your calculations on surface area (you said volume which is a term that involves the idea of 3D shapes and a circle and a trapezoid are 2D objects) then 8 of those shapes would create a square that has a side length that would envelope that circle completely... i am currently trying to arrange 19 of the trapezoids into a circular pattern basing the curve of rotation on the difference between the short and long side... but this is making more of a jagged dounut rather than a circle... If "19" is a magic number in said equation then it could be interesting... but that would require a series of case studies...
As for this being in relation to Tesla you have yet to quote or show any relevance... only some obscure relation to a text that apparently looses half its meaning when translated into anything but arabic...

Mr Magnusson · « **Reply #12 on:** November 22, 2008, 10:55:47 AM »

CrazyEwok
You are probably quite right about all this. I have only used ruler, pen and paper.
It was Tesla 3,6,9 that gave me idea to experiment with angles. if it then has something to do with Tesla or not, I do not know.
I have no Cad programs, so could you please look at one thing for me? 19x19 = 361. 361/360 = 1.0027777777777777777777777777778. 0.49-0,10027777777777777777777777777778 = 0.389722222222222222222222222223 is this just a coincidence?

RM

CrazyEwok · « **Reply #13 on:** November 24, 2008, 02:05:24 AM »

Unfortunately throwing random numbers to me that have nothing attached to them as significant that saying COINCIDENCE?!? means not a lot...

3 x 3 = 9 , 6 + 3 = 9, 9/3 = 3 & 3x 2 = 6
Coinchidence??? i think not!!!

News:

User Menu

Author Topic: Tesla 3,6,9 (Read 16130 times)

Mr Magnusson

Tesla 3,6,9

CrazyEwok

Re: Tesla 3,6,9

Mr Magnusson

Re: Tesla 3,6,9

Mr Magnusson

Re: Tesla 3,6,9

innovation_station

Re: Tesla 3,6,9

Mr Magnusson

Re: Tesla 3,6,9

CrazyEwok

Re: Tesla 3,6,9

Mr Magnusson

Re: Tesla 3,6,9

Mr Magnusson

Re: Tesla 3,6,9

Mr Magnusson

Re: Tesla 3,6,9

Mr Magnusson

Re: Tesla 3,6,9

CrazyEwok

Re: Tesla 3,6,9

Mr Magnusson

Re: Tesla 3,6,9

CrazyEwok

Re: Tesla 3,6,9