Free Energy | searching for free energy and discussing free energy
Mechanical free energy devices => mechanic => Topic started by: nitinnun on October 29, 2008, 11:32:23 AM
-
why does the bedini motor work?
what energy physics is it abusing, to get energy?
if nobody is certain why it works, than what theories do people have?
if you know why, than please just type it to me short and sweet.
because my eyes are burnt out from reading too many pages of syntaxical waste.
-
Hello all,
@nitinnun
because there are a few "electrolytic caps", pulsed.
Short and sweet enough?
Otto
-
what are electrolytic caps?
how do they relate to the bedini motors function?
what is pulsed?
how does pulsed relate to the bedini motors function?
what are the most important energy functions, that allow the bedini motor to work?
and what is the function of that transistor?
-
Hello all,
@nitinnun
because there are a few "electrolytic caps", pulsed.
Short and sweet enough?
Otto
THIS IS "NONSENSE"
IF this WORKS,
than ist impossibels to charge up, with all thiss
(Voltage-)Losses in Semiconductors etc.
IF .. also unknow to OTTO , otherwise he is searchin HERE the
"ultimative and usefull Free Energy
-
it works so does my tpu .... 8)
why ?? of course i know why
do you? i guessing you have not built it .....
just build it!!!
it will teach you :D
ist
otto plused caps .... ;D that is a good one ;)
how about it works beacuse it breifly makes a connection to the BIG WHEEL :P
-
yes,teach me please IS! :)
-
Hi!
@nitinnun
what are electrolytic caps?
The electrolitic caps(Capacitors that have polarity) Must be connected with the right polarity or they will explode. Believe me!
how do they relate to the bedini motors function?
(In one fo their uses) are a means to store energy to be used by the motor.
what is pulsed?
Pulsed is that the current is applied then cut and applied again. The cycle repeats until the motor is turned off.
how does pulsed relate to the bedini motors function?
One of the benefits of pulsing the current is that the motor runs cooler and not being continuous saves battery power.
Also it is the pulsing that makes the capacitor to charge faster or to sore energy faster.
what are the most important energy functions, that allow the bedini motor to work?
In my opinion it is the energy generated by the coil when it is pulsed by the electromagnet. The trigger generated by the rotor and the magnets on it, when they pass over the coil...
and what is the function of that transistor?
It controls the energy sent to the electromagnet coil. It takes the trigger current generated by the rotor coil interaction at its base and activates a pass for the negative current, on this case, to get to the coil at the right time, making the pulse to make the rotor spin with the electromagnet.
Remember I can be wrong though.
Jesus
-
The elecrolydt can not more store and deliver , as they have become "in"
as INPUT before. even no differences , if this was DC , short pulse or peaks, that "delivered" the charge
If an "overunity" was stored there - that must come to the "input".
The electrolydt condensor himself cant produce an overunity. If .. you must search not in the condensor
GP
-
here is my pluse motor with out moveing parts 8)
ok
the transistor does far more than pluse the coil it redirrects the kickback to out put... this kick is far more than you appliyed to it to create it
i could talk a lifetime on this unit ....
hears a tip the strength of the mag feild is un inportant :P as is the input .. the magnets are not needed.... i will be able to apply an external magnet to my tpu and this will rev it up ;) ;)
polerized caps .... ha!! do this once charge it backward just a split second and watch what happins.... welcome TO SPINN!! I ORIGINALLY CALLED THIS EFFECT ORBIT!!
i just proved where tesla teaches us of this verry thing....
anyhow i must finish my tpu
ist
-
Hi!
@innovation
I dont know if it is just me, but I cant see the posted photo.
when I try it gives an error message about the header???
Jesus
-
im not surprized...
check the tpu threds you will see my work there...
if not hummm it aint hard...
:)
ist
just build it ..
hears the link to the tpu pics.. here you will see what is inside a tpu!! it is a pluse genny ;) that utializes bemf and it is also a pump and a generator plus many other things.....
http://www.overunity.com/index.php?topic=4728.680
enjoy
-
Hi!
Thank you innovation.
I have three working bedini motors, none is overunity, also I have a working newman motor, also not overunity.
The thing is that wherever you post a photo, almost always it cannot be seen.
Jesus
-
Hello,
Bearden and Bedini think it's a chimical/physical effect in the charging batterie due to high voltage with "no" current !
No one know what append in this circuit but more than one replicator clam they own work well...
Juste try a SG to be self trying !
Have nice day
(sorry for my bad english)
Molux
-
Nieves In the bottom left corner of the picture [most times ]is a paper clip ,click to the left of the clip .a file will appear that you need to open Chet
-
i saw some pictures online. and i think it works like this.
the magnet polarizes the copper coil. so the copper coil has a magnetic field.
BUT. the COPPER ATOMS in the coil, EXPEND THEIR OWN ENERGY, to polarize !
the magnet does not lose power from this. the power comes from the copper atoms!
the atoms get the energy to do this, from the universe. so as long as there are suns and blackholes, the copper atoms will never run out of power.
if the above is true, than it is technically zero point energy.
zero point energy, harvested VIA magnetic polarization.
-
what if you spin 1 magnet over a coil, so that the magnets north and south poles both hit the coil?
like this:
N-S IIIIII
S-N IIIIII
N-S IIIIII
wouldn't that polarize the coil even further, both ways?
maybe even cause AC output, from the coil?
-
How about connecting 2 bedini motors in such way that output of first one is connected to the input of the other one and the output of the second motor is connected to the input of first one. If they run, let say for 2 years, I will start to thing that maybe Bedini fanatics are right.
-
build the danm thing......
and maybe your fanticy can be proven true...... as bedinis is proven......
aint nobody gonna do it 4 u :D
ist
-
How about connecting 2 bedini motors in such way that output of first one is connected to the input of the other one and the output of the second motor is connected to the input of first one. If they run, let say for 2 years, I will start to thing that maybe Bedini fanatics are right.
This is and old post look at it the Bedini worked great with one big coil and one guy used 2 facing each other one turnning on the other
Hi All
@ Otto
You talk about vibration and getting it to work with wave in
I have been playing with Bedini school girl setup and stumbled on
Something that may help in this case.
I used a 6? Spool with a 2 inch core I ran 500 ? magnetic wire
Filled it with welding rods and ran the wheel worked OK but not as good as
The smaller Spools I added 2 12v batteries in series and making it stronger 24v
Not much better
One day the magnets slipped off and the wheel stuck to the Spool by the magnets
And the spool started to vibrate it was working with out the wheel moving and still is
I think what is happening is the magnetic field in the welding rods and or the mass of wire kicks on the one wire going to the transistor and turns it on.
I always wondered if it was that ease to get this to work are we getting to complicated,
In the design.
the TPU is very much like the school girl project
By the way when SM worked with SS he said the trick was in the Board he used and the
Height of the IC?s off that board
Nick
-
http://pls.atu.edu/physci/physics/people/bullock/Physical_principles_2/Lectures/Chapter_23.pdf
-
the best description from Bearden "Bedini's Method for Forming Negative Resistors in Batteries" :
http://www.cheniere.org/techpapers/Bedini.pdf
battery ion delay increase the effect like on Tesla Switch
http://www.freeenergynews.com/Directory/Electromagnetic/TeslaSwitch/Tesla_Battery_Switch_PGFED.pdf
(pdf; 115 kb) by Patrick Kelly
at the end of this paper.... ground connection improve the effect.
the energy come from the earth?
http://www.panaceauniversity.org/John%20Bedini%20Technology.pdf
-
http://gratisenergi.se/mgbedini.pdf