Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: IST'S 4 MOT MECHANICAL TPU!i!  (Read 10306 times)

innovation_station

  • Hero Member
  • *****
  • Posts: 5134
Re: IST'S 4 MOT MECHANICAL TPU!i!
« Reply #15 on: July 25, 2008, 11:37:14 PM »
 :)

just 1 more pic for today....

ist

innovation_station

  • Hero Member
  • *****
  • Posts: 5134
Re: IST'S 4 MOT MECHANICAL TPU!i!
« Reply #16 on: July 26, 2008, 12:18:25 AM »
IST, is that the best you can do?

Sorry, but I can do more than that by Pulsing a simple Coil of Wire.



.

 ;D

i have only just begun....    lol

cheers  :)

my challange for everyone will be to mesure how long my unit will run off a battery WITHOUT RECHARGING THE SOURCE BATTERY ;D ;D
also to mesure 10 miliamps  of draw from my source battery lol

ist  ;)

personally i have never even mesured 1 miliamp of draw....    so as best as i can tell in my uneducated arpoch to free engery  is it indeed is free engery

so there you have it  THIS CAN BE WIRED UP A MILLION WAYS  ;) depends on what you want to achive.....

the best of luck  :)

innovation_station

  • Hero Member
  • *****
  • Posts: 5134
Re: IST'S 4 MOT MECHANICAL TPU!i!
« Reply #17 on: July 26, 2008, 12:32:44 AM »
@ FatBird


does yours affect your tv radio and make some noise??  cuz mine DOES NOT!!!   ;D ;) 8)

ist

oh is it emp proof??    well    maybe......

FatBird

  • Hero Member
  • *****
  • Posts: 1178
Re: IST'S 4 MOT MECHANICAL TPU!i!
« Reply #18 on: July 26, 2008, 01:11:30 AM »
Sorry, but I never had my radio on when I was pulsing the coil, so I don't know.  Maybe I can try that.

I just pulse the coil at about 35 KHz, using an 18V drill motor battery.  My Sig Gen pulses the FET Gate directly.  One end of the Coil is connected to + 18V on the battery.  The other end of the Coil is connected to the FET Drain.  The FET Source is connected to the Battery - terminal.  It is really a simple circuit, but I CANNOT get overunity no matter what I try.

The light bulb is 120V & 40 Watts.  It gets white hot bright when the Sig Gen Pulse Width control is at its maximum pulse width position.

Thank you for sharing your circuit photos.


.

innovation_station

  • Hero Member
  • *****
  • Posts: 5134
Re: IST'S 4 MOT MECHANICAL TPU!i!
« Reply #19 on: July 26, 2008, 01:40:41 AM »
Sorry, but I never had my radio on when I was pulsing the coil, so I don't know.  Maybe I can try that.

I just pulse the coil at about 35 KHz, using an 18V drill motor battery.  My Sig Gen pulses the FET Gate directly.  One end of the Coil is connected to + 18V on the battery.  The other end of the Coil is connected to the FET Drain.  The FET Source is connected to the Battery - terminal.  It is really a simple circuit, but I CANNOT get overunity no matter what I try.

The light bulb is 120V & 40 Watts.  It gets white hot bright when the Sig Gen Pulse Width control is at its maximum pulse width position.

Thank you for sharing your circuit photos.


.

you are most welcome for the pics 

in your post that is the exact point...  the faster the pluse the brighter the bulb.....

this is how and why my p of c works you can plainly see that the laptop power supply can not lite the bulb verry bright it is lit but extreamly dim  when i pluse my mot with the same amount of input my bulb is bright really bright the pics do not do this justice you really must try it ....  and actually the same amount of engery but used only half as long over time  8) becaused it is plused!!!  so ideally half as much consumptuion and 100 times brighter .....

so ...   in my laptop power supply there is a trip switch to portect it from overload ....  so in the primary of the mot  i have a curciut of low self induction in my laptop power supply i have a curcuit of high self induction and an over load portect curcuit ....  and finally in my mot the secondary is a curcuit of high self induction but it is less high than my supply.....  so

the electricty had but 1 path that is through the secondary of my mot to the load  8)  there no caps or diodes in this simple p of c


ist

innovation_station

  • Hero Member
  • *****
  • Posts: 5134
Re: IST'S 4 MOT MECHANICAL TPU!i!
« Reply #20 on: July 26, 2008, 03:54:44 PM »
ok so lets talk about the operation of this unit i just built....

there 4 transformers all 4 are primaryies only ... 

they are dubble primarys 1 of low selfinduction and 1 of hi selfinduction
they are hooked up as 1
the pluse is offered 2 paths
only 1 coil works its way back to ground .... 

guess the coil... 

of course it is the biased secondary of the tranny that would be why it consumes no power.... 

it just almost cannot get through....  just the smallest amount   

this coinsides with what TESLA says the high self induction will resist sudden change ....  it is a choke coil 

now on my primary i get a kick back when i disconnect the power right !!!

i did a vid a wile ago now demenstrating this verry effect  so

 i  must take off of my unit from my original primary this is where the kick back will return to because of the low selfinduction ...   
so if
 YOU ARE FRYING FETS AND SWITCHING DEVICES THIS IS WHY .....
YOU GOT IT IN THE WRONG PLACE.....
THAT IS YOUR OUT PUT....   PUT YOUR CAP THERE... ::) 
THEN USE YOUR SWITCHER TO SHORT THE CAP....  IMAGINE ..   

 NO MORE FRIED FETS LOL!!!!!

ist


i could talk for weeks about this unit ....


but please dont take my words for it try it out  ;D  see for yourselvs....


alan

  • Hero Member
  • *****
  • Posts: 716
Re: IST'S 4 MOT MECHANICAL TPU!i!
« Reply #21 on: July 26, 2008, 04:17:31 PM »
I'd say, 100 times brighter because it self-resonates.
Does the lamp get any hotter than with straight DC?

innovation_station

  • Hero Member
  • *****
  • Posts: 5134
Re: IST'S 4 MOT MECHANICAL TPU!i!
« Reply #22 on: July 26, 2008, 04:46:10 PM »
my unit is plused extreamly slow ....   no resosnance here yet ;D

yes my bulb gets hot!!  now if you put my ist neo zap vibrating spark gap as your driver ......

then you see de light damn bright lol

as well you get her singing...  the tranny that is ....  you will hear the magic ....

ist

the problem already i am speeking of about 4 or 5 diffrent ways to do it in this thred and it confuses everyone errrrrr

the unit i posted is teslas ozone pattend it is intended to use almost no power ...  to see the light you must switch amparage.... my unit is not designed to do this...  my following units will do this ...  i built this to teach how this works where people will not get hurt learning.... because when you switch big power you will have big power return!!!  it can KILL YOU   be wise.....

this unit however will not kill you it is like an electric fence when you get a zap ....  sure you feel it but it will not kill you i have been zapped hundreds of times ;D  from this unit

but this is NOT A FREE ENGERY DEVICE IT IS A CONVERSION DEVICE

the conversion takes place from cold to hot and happins inside the cap the cap is delivered a cold potencial from   the kickback it flips the polarity to hot or positive potiencial ...  and it seeks ground 8)  send it through your load to earth ground or to the supply ground


Localjoe

  • Hero Member
  • *****
  • Posts: 812
Re: IST'S 4 MOT MECHANICAL TPU!i!
« Reply #23 on: July 28, 2008, 07:46:43 PM »
Quoted from IST

"THAT IS YOUR OUT PUT....   PUT YOUR CAP THERE... Roll Eyes
THEN USE YOUR SWITCHER TO SHORT THE CAP....  IMAGINE ..   "

Joe's reply

- Well Jim Bob that sure sounds like the ozone patent switching setup

Elray says-  Well shit ive been telling you and cleetis that all along..

altium

  • Newbie
  • *
  • Posts: 48
Re: IST'S 4 MOT MECHANICAL TPU!i!
« Reply #24 on: August 02, 2008, 09:47:05 PM »
Hello, innovation_station,
can you draw a simple schematic of your device? From pictures I cannot see principle of work and coil settings. But I want to replicate it. Can you help me with electrical schematic please?
Thanks.

innovation_station

  • Hero Member
  • *****
  • Posts: 5134
Re: IST'S 4 MOT MECHANICAL TPU!i!
« Reply #25 on: August 10, 2008, 07:11:08 AM »
added test tranny to the 4 mot unit  it is used as a secondary in my mot unit.....

i will post a pic when i finish it ....

ist