Author Topic: LUTEC-JOHN CHRISTIE-AUSTRALIA (Read 76523 times)

johnagain · « **Reply #15 on:** April 26, 2009, 03:22:11 PM »

Dose anyone know the current position on lutec are the still in existance and contactable

Ergo · « **Reply #16 on:** April 26, 2009, 07:59:12 PM »

Try yourself, but you better have some cash to offer or you won't see any replies.....

Flyboy · « **Reply #17 on:** April 27, 2009, 01:28:18 AM »

Quote from: Ergo on April 26, 2009, 12:30:57 PM

If you believe they really have found overunity 9 years ago and is still not showing anything except
seeking end users (which is no problem in finding) you are truly a hopefull and very gullible person.

Thanks Ergo for your reply, 9 years is not that long for r&d when limited to a crew of 2 and only have hobbie hours to put into it, however I have seen enough other products in my time that had some cool led lights on a box cover that I can understand your position. What I was really after was if anyone know of anyone who has currently worked along similar lines as these guys. I suspect there are awesome answers very close to the area they are working in regardless of whether or not Lutec has struck gold or not.

Ergo · « **Reply #18 on:** April 27, 2009, 08:55:08 AM »

Here's a test report on the Lutec contrapment.

Quote: http://freeenergynews.com/Directory/Lutec1000/
Rosenthal and Cole
Report by Sterling D. Allan
March 8, 2003

Engineers, Walt Rosenthal and Parke Cole were invited to measure the Lutec1000 in January 2001.
Their measurements showed results showed 28% efficiency.
The exchange was amendable, despite the negative test results.
Rosenthal stated, "I walked them through the calculations carefully so they would understand,
but they didn't want to believe the results." Test entailed a dynamometer measuring output the motor,
powering with power supply from wall producing DC volts, optical shaft encoder on end of shaft to measure rpm.
Results showed 50 Watts power going in and 14 Watts equivalent of mechanical power coming out.

After receiving the above synopsis, Walt Rosenthal added the following:

Report by Walt Rosenthal
(recorded March 8, 2003)

The inventors would start with fully charged batteries for the demonstration.
They assumed that the battery terminal voltage would decrease linearly as the battery was used.
So, after using the battery for, say, 30 minutes, they would again measure the battery terminal voltage,
and subtract this value from the start voltage, then multiply that difference voltage times the known amp-hour
capacity of the battery bank, to come up with their assumption of the total energy consumed from the battery bank.
Unfortunately, battery terminal voltage is almost flat for perhaps 90 percent of the battery capacity, before it
drops off rather steeply for the last 10 percent of it's capacity.
Parke Cole and I tried to explain this to the inventors. I am not sure we succeeded.
We were about the 15th group of people to show up on their door step after they went public.
We were the first people to bring our own test equipment.
The inventors said that the first people to show up were the Russian Mafia.
Our bottom line was 50 watts of DC power input, which resulted in 14 watts of rotary mechanical power output.
I hope the inventors have improved their device from where we tested it so that it now matches their statements of it's performance.
End Quote:

Ergo · « **Reply #19 on:** April 27, 2009, 09:13:29 AM »

Please see the attached PDF on a serious and revealing Lutec Investigation.
Their motor is only 33% efficient........

Flyboy · « **Reply #20 on:** April 28, 2009, 06:07:40 PM »

Thanks guys for the reply. Ergo that article was very enlightening and tends to confirm my personal suspicion that the inventors truly believe in their product and have very likely seen some form of phenomena yet are struggling to exploit it beyond a quirky observation. Just wish I had known about these guy last time I was in their area to go diving... $:-\$

Mem · « **Reply #21 on:** July 19, 2009, 08:34:27 PM »

Hi everyone,

BEWARE OF THIS SCAM WEBSITE, DO NOT BUY SO CALLED: FREE POWER BLUEPRINTS... IT'S FAKE!!!
http://www.freepowerblueprint.com/?hop=andrea8pet

Here is a detailed story for you here:

Yesterday I saw a video on Youtube about lutec energy amplifier http://www.lutec.com.au/index.htm
and on the video had a text written about this website here http://www.freepowerblueprint.com/?hop=andrea8pet
For a while I was excited "thinking that" finaly they are sharing with public free power "low cost" bluprints

Everything looks so realistic, (you may think: Is this for real?) "too good to be true"

Well this damn site is all fake here http://www.freepowerblueprint.com/?hop=andrea8pet
Nicely setup to steal your $50 bucks, it's terrrible...

I almost purchased the fake plans... But for before I did that I sent a quick email to "Lutec Australia"
to find out if this website was setup by them?

Lu, send me quick email and here is what he said:

> Dear .....,
> I would say that He is a crook.
> He certainly has no associaten with us.
> Further, thank you to bring to my attention.
>
> Best Regards
>
> Lu Brits

- Show quoted text -

He then, sent me another email and he said:

> We will pass it on to our authorney who will be back by the end of next
> week.
>
> Once again thanks.
>
> LU

Further more I saw several other websites that they bought so called rights to sell the free power blueprints.

terrible they set the traps to steal enocent peoples money!

Mem.

TheCell · « **Reply #22 on:** August 07, 2009, 10:07:52 PM »

Well Lutec has allready a Licensee of their technology:
http://www.evergreenltd.com.hk/EEI-Home.htm
Obviously a foreign inventor is convinced about the capabilities of their device.
EVERGREEN ENTERPRISE INTERNATIONAL LTD of Hong Kong owns the sole and exclusive rights to negotiate and contract all global, regional and individual country licenses to deal commercially with the EEA technology.
_________________________________________
I don't think a fraud can be commercialized this way.

Goat · « **Reply #23 on:** August 08, 2009, 03:18:22 AM »

@ TheCell

Thanks for the link

Good news if it's true but I'm somewhat skeptic though.

On the Opportunity page at http://www.evergreenltd.com.hk/the-opportunity.htm they show Prototypes of the Evergreen Electricity Amplifiers.

Where's the beef?...

I can understand that they needed to setup a business which involves investors and government etc. and certainly getting world wide patents must have cost them dearly throughout the years so I can see all the years of frustration and all , but if they had a 1 KW Electricity Amplifier unit available at Walymart for $100 - 200 I'm sure people would be beating the doors down to get at them!

Why go after Mega Watt stations and Global Investors when you could make available a small unit that would please everyone in the $100 - 200 range?

The cost of investment to tackle Global Warming for individuals would be cheap and the inventors/investors would greatly increase profits by producing only one 1 KW unit available in mass quantities to the general public for acceptance of a real workable appliance, not just another prototype and investor opportunities....we are the investors! If they have the real thing

Regards,
Paul

markdansie · « **Reply #24 on:** August 08, 2009, 04:12:55 AM »

Lutec has never allowed an independent test of their claims in all these years. ( I am happy to be corrected if they have) If they had something that could be validated they would be worth millions.
Because of threats of law suits I am not say they have something or not...but at least ask the right questions.
Mark

ATT · « **Reply #25 on:** August 08, 2009, 06:31:56 AM »

.

Quote from: Mem on July 19, 2009, 08:34:27 PM

BEWARE OF THIS SCAM WEBSITE, DO NOT BUY SO CALLED: FREE POWER BLUEPRINTS... IT'S FAKE!!!
...Further more I saw several other websites that they bought...

Most of the scam websites are pretty easy to spot, they usually roll-out sites that scroll-down with the whole message/pitch on one page so you don't have to click any links and generally follow a format that goes something like this:

Pitch
testemonials
guarantee
special price
time limit
buy-now
follow-up

...all on the same page.

If you use Firefox, install Flagfox so you can do instant whois-lookups on suspect sites.

Check the phone-number and contact info for this site...:

Whois Record

Registration Service Provided By: NameCheap.com
Contact:
Visit: http://www.namecheap.com/

Domain name: freepowerblueprint.com

Registrant Contact:
Vrc
Vince Martela ()

Fax:
Dzon
Skopje, MK 1000
MK

Administrative Contact:
Vrc
Vince Martela ()
+1.34
Fax: +1.5555555555
Dzon
Skopje, MK 1000
MK

Technical Contact:
Vrc
Vince Martela ()
+1.34
Fax: +1.5555555555
Dzon
Skopje, MK 1000
MK

Tony
.

TheCell · « **Reply #26 on:** August 08, 2009, 12:40:37 PM »

For example cold fusion heater , that works with a catalyst consisting a palladium electrode.

You can realize the whole process of supressing this technology until it comes up again. And those organisations that supress such a technology are mighty by destroying careers of Physicists and Inventors. There is no mental life energy left for someone who has gone through this.

http://www.cbsnews.com/video/watch/?id=4967330n&tag=related;photovideo

When you have seen the film , you can easily imagine the way it is done , and how the lutec guys where evt. been treated.

Now there are a few institutes like
Univerity of Missouri
Israel Energetics Technologies
Pentagon

that confirm that this cold fusion heater works with giving
excess heat.

So announcement has a official character and it seems to me that there is a break through since Obama is president.

Maybe lutec should go on with their plans in the US and seek
a institute for confirming their device LEA working as claimed.

eddy · « **Reply #27 on:** August 16, 2009, 12:57:27 AM »

Hi Folks, Well it seems that the admin haven't read these threads. I'm still waiting to be contacted regarding any conformation that an over-unity generator is more than just a dream. What about the generator being built in budapest, by all accounts that utilizes the back e.m.f. and is supposed to operate at over 100% efficiency, or is this just more dis-information?
I thought you might be interested in this reply from a chinese designer who by all accounts has developed a magnetic motor.
Mr. Wang Shenhe has asked me to organize a â€˜pre-announcementâ€™ demonstration at Shenzhen University in the coming weeks. He is already the vice president of a listed company. He wants to sell or pass the research and development of the less than 10 KW electricity generators for the home market to other organizations.

I deliberately included your email addresses so that you can communicate with each other first before coming to the Shenzhen University Demonstration. I want the information to be as open as possible. You are welcome to bring your cameras and recorders.

The demonstration will consist of the Lee-Tseung Lead-Out-Energy Theory and two prototypes. One will rotate for the entire period of the demonstration â€“ 3 days. The other will be taken apart to show the various components. These two prototypes were developed by Mr. Sun Fujun in Shenzhen. They could not generate much electricity but could conclusively demonstrate the theory and the working principles. ltseung@hotmail.com
http://www.energyfromair.com/IOE_talk

That's all for now folks,happy hunting, Eddy

sini · « **Reply #28 on:** July 24, 2010, 10:52:52 PM »

how do I contact these guys I am interested in this technology

CompuTutor · « **Reply #29 on:** July 25, 2010, 02:06:49 PM »

Wow guys, you missed the funniest part about this,
look at the toy truck in the mini two foot warehouse !
"Image Projection of the One Megawatt Mini Power Station"

See, they have product, to bad they are miniature models.

They forgot to remove the properties from the pics too,
they were taken with a Sony CyberShot camera
then modified in Adobe Photoshop Elements V2.0, LOL !

Focal Length: 1.5 MilliMeters !

Even the date is funny:
January 17th 2078...LOL

All three "Prototype" unit pics were taken
at the exact same second too:
21:06:12 (9:06-PM)
Obviously a Photoshop paste job.

http://www.evergreenltd.com.hk/pics/EEI-Warehouse01.jpg

News:

User Menu

Author Topic: LUTEC-JOHN CHRISTIE-AUSTRALIA (Read 76523 times)

johnagain

Re: LUTEC-JOHN CHRISTIE-AUSTRALIA

Ergo

Re: LUTEC-JOHN CHRISTIE-AUSTRALIA

Flyboy

Re: LUTEC-JOHN CHRISTIE-AUSTRALIA

Ergo

Re: LUTEC-JOHN CHRISTIE-AUSTRALIA

Ergo

Re: LUTEC-JOHN CHRISTIE-AUSTRALIA

Flyboy

Re: LUTEC-JOHN CHRISTIE-AUSTRALIA

Mem

-WARNING- SCAM FREE POWER PLANS of LUTEC-JOHN CHRISTIE-AUSTRALIA VIDEO HIJACKED

TheCell

Re: LUTEC-JOHN CHRISTIE-AUSTRALIA

Goat

Re: LUTEC-JOHN CHRISTIE-AUSTRALIA

markdansie

Re: LUTEC-JOHN CHRISTIE-AUSTRALIA

ATT

Re: -WARNING- SCAM FREE POWER PLANS of LUTEC-JOHN CHRISTIE-AUSTRALIA VIDEO HIJACKED

TheCell

Re: LUTEC-JOHN CHRISTIE-AUSTRALIA

eddy

Re: LUTEC-JOHN CHRISTIE-AUSTRALIA

sini

Re: LUTEC-JOHN CHRISTIE-AUSTRALIA

CompuTutor

Re: LUTEC-JOHN CHRISTIE-AUSTRALIA