Author Topic: FREE ENERGY USING MAGNETS (Read 81684 times)

gotoluc · « **Reply #45 on:** May 17, 2008, 07:30:08 AM »

Quote from: nightlife on May 17, 2008, 03:33:21 AM

I have always had the design and I was just missing one key feature that I have just figured out after I stated this thread.

I will be posting more later.

Hi Tom,

I hope the design is not to different since I spent all day building a new motor to try out your dual magnet ideal, see pictures below. The magnets have not been inserted in the rotor yet but it is about ready to go. I also posted a C core motor that I made using a Shaded Pole Motor and cutting and modifying the rotor to Z shape and cutting the core to a C shape. See picture and this video of it working with only half the pulse with a quick make shift contact I made to test it. Video: http://www.youtube.com/watch?v=CKzZCa0JQGg

Luc

nightlife · « **Reply #46 on:** May 17, 2008, 04:15:31 PM »

gotoluc, good work. It looks like you understand the concept. You are doing just fine and please do not let my last post discourage you. Your motor should prove my findings to be correct and I personally can't wait to see your final results.

I was unable to finish my new design last night because the wife said I was making to much noise. I will be finishing today though. If my new design works out as planned, you will still be able to use parts of yours to duplicate it if you should choose to do so. I can not post my new design until I get my letter back.

Every time I come up with a idea, I write it down and mail it to myself and I do not open it. This is so I can keep others from stealing it to make a profit from it. If anyone should ever try to patent any of my designs, I will sue them. These designs are posted for everyone to use at no cost. They are all open source and I will do everything in my power to make sure they stay that way. Energy is free and no one should ever have to pay for it.

gotoluc · « **Reply #47 on:** May 17, 2008, 08:23:29 PM »

Quote from: nightlife on May 17, 2008, 04:15:31 PM

gotoluc, good work. It looks like you understand the concept. You are doing just fine and please do not let my last post discourage you. Your motor should prove my findings to be correct and I personally can't wait to see your final results.

I was unable to finish my new design last night because the wife said I was making to much noise. I will be finishing today though. If my new design works out as planned, you will still be able to use parts of yours to duplicate it if you should choose to do so. I can not post my new design until I get my letter back.

Every time I come up with a idea, I write it down and mail it to myself and I do not open it. This is so I can keep others from stealing it to make a profit from it. If anyone should ever try to patent any of my designs, I will sue them. These designs are posted for everyone to use at no cost. They are all open source and I will do everything in my power to make sure they stay that way. Energy is free and no one should ever have to pay for it.

Thanks for your words of encouragements Tom. We have the same outlook about free energy. I would do the same to keep it out of the hands of the greedy ones. If I had a free energy device I would want to help 3rd world contries first. I feel prosperity should be equally distributed, that is what Mother Nature does and we should follow by example.

I'll keep you posted on the development.

Luc

gyulasun · « **Reply #48 on:** May 17, 2008, 08:35:57 PM »

Quote from: Dact on May 17, 2008, 07:16:35 AM

YouTube claims these are no longer available. True?

Hi Dact,

Both links seem to be working. Must have been occasional problem you just found.

Gyula

http://www.youtube.com/watch?v=Pj6gaf4chzM

http://www.youtube.com/watch?v=OqXtWeAQx60&feature=related

nightlife · « **Reply #49 on:** May 18, 2008, 02:39:47 AM »

I was unable to get my new design to work as planned. I think I have the timing off. My brain is tired. Maybe it is my brain that is off. LOL

I am not giving up yet, although I may be giving for the night.

gotoluc · « **Reply #50 on:** May 18, 2008, 04:49:12 PM »

Hi All,

here is an updated Video of my 2 Pole Single Coil Pulse Motor: http://www.youtube.com/watch?v=A7BJQebSgYc

Luc

b0rg13 · « **Reply #51 on:** May 19, 2008, 12:38:40 AM »

Quote from: gotoluc on May 18, 2008, 04:49:12 PM

Hi All,

here is an updated Video of my 2 Pole Single Coil Pulse Motor: http://www.youtube.com/watch?v=A7BJQebSgYc

Luc

great video, im hoping to try and make something soon to charge 4 batteries i have laying around,...it great to see these motor concepts coming out of the woodwork.

gyulasun · « **Reply #52 on:** May 19, 2008, 01:10:00 AM »

Quote from: nightlife on May 18, 2008, 02:39:47 AM

I was unable to get my new design to work as planned. I think I have the timing off. My brain is tired. Maybe it is my brain that is off. LOL

I am not giving up yet, although I may be giving for the night.

Hi nightlife,

Earlier you were looking for bemf and polarity switching circuits and you found as you wrote.

Here is a link to an interesting circuit on regaining the collapsing field's energy and feeding it back to the source battery by using a bifilar (i.e. a double coil) instead of one single coil:
http://www.emuprim.lv/bildez/images/viskautkas_labs/visadi_strunti_1/shema10%20(1).GIF This link comes from this forum here: http://www.energeticforum.com/18733-post778.html By using the second coil you can make the flyback pulse totally isolated from the rest of circuit (ground and source battery pole independent).

And for your polarity reversal circuit, I assume you found the known H-bridge circuit used for controlling DC motors for forward and reverse direction and here is a link for useful infos on it:
http://www.modularcircuits.com/h-bridge_secrets1.htm
http://www.modularcircuits.com/h-bridge_secrets2.htm
http://www.modularcircuits.com/h-bridge_secrets3.htm

another simple circuit: http://www.cadvision.com/blanchas/hexfet/np-s.htm
and here is a practical circuit with bipolar switching transistors: http://www.ikalogic.com/H_bridge_1.php

Of course your coil(s) to be switched replace the DC motor in the circuits.

rgds, Gyula

nightlife · « **Reply #53 on:** May 19, 2008, 03:21:04 AM »

gyulasun, thank you for those links but they did not show what I was looking for. I was looking for a circuit that would utilize the collapsing fields in both directions from shutting off the coils in between the polarity switching.

When the coil is powered N<-------->P, the collapsing field is P<------->N but when you switch the power to P<------->N the collapsing field switches to N<------->P.

I was looking for a circuit that could utilize both directions of the collapsing fields.

Did This make sense?

nightlife · « **Reply #54 on:** May 19, 2008, 06:07:07 AM »

gotoluc, thanks for the video link. Is there any way you can test the amps of the collasping field you are collecting and post the results for us?

gotoluc · « **Reply #55 on:** May 19, 2008, 08:34:03 AM »

Quote from: nightlife on May 19, 2008, 06:07:07 AM

gotoluc, thanks for the video link. Is there any way you can test the amps of the collasping field you are collecting and post the results for us?

I could do that but I don't have the final commutator for the pulse system of the motor built or decided wet, so the efficiency is not good at this time. Last time I checked it was about 22 milliamp collected of the 120 milliamp supplied. However I feel that it could get better once I make my own coil to reasonate at the same frequency as the pulse of the motor (once I find out what speed it will want to turn at). I think with all these things in balance one could collect about 50% or more (I hope) of the energy from the collapsing field.

Luc

gyulasun · « **Reply #56 on:** May 19, 2008, 04:04:14 PM »

Quote from: nightlife on May 19, 2008, 03:21:04 AM

gyulasun, thank you for those links but they did not show what I was looking for. I was looking for a circuit that would utilize the collapsing fields in both directions from shutting off the coils in between the polarity switching.

When the coil is powered N<-------->P, the collapsing field is P<------->N but when you switch the power to P<------->N the collapsing field switches to N<------->P.

I was looking for a circuit that could utilize both directions of the collapsing fields.

Did This make sense?

Hi nightlife,

Yes, it did. I have attached a drawing how I think this could be done first.

When both switches are in position A and you control them to switch to position B, the flyback pulse in L can enter C1 via diode D1. D2 blocks this flyback pulse from C2.
And when both switches are in position B and you control them again to switch back to position A, the flyback pulse in L can enter C2 via D2. D1 blocks this flyback pulse from C1.

So both C1 and C2 are able to store flyback energy in both polarity change periode until you utilize them by further circuits.

Basically you can use a H-bridge for the two switches.

Is this what you thought of?

rgds, Gyula

nightlife · « **Reply #57 on:** May 19, 2008, 05:31:30 PM »

gyulasun, thank you for that drawing and that was about the same thing as I was thinking of using. I can't beleave that I actaully made any sense. LOL

Thanks again.

petersone · « **Reply #58 on:** May 19, 2008, 10:38:05 PM »

gjhkifghlkk

petersone · « **Reply #59 on:** May 19, 2008, 10:42:55 PM »

Just an idea in the above drawing,uses both sides of coil and mags.
your comments gentelmen,(and ladies) any good?
happy hunting.
peter

News:

User Menu

Author Topic: FREE ENERGY USING MAGNETS (Read 81684 times)

gotoluc

Re: FREE ENERGY USING MAGNETS

nightlife

Re: FREE ENERGY USING MAGNETS

gotoluc

Re: FREE ENERGY USING MAGNETS

gyulasun

Re: FREE ENERGY USING MAGNETS

nightlife

Re: FREE ENERGY USING MAGNETS

gotoluc

Re: FREE ENERGY USING MAGNETS

b0rg13

Re: FREE ENERGY USING MAGNETS

gyulasun

Re: FREE ENERGY USING MAGNETS

nightlife

Re: FREE ENERGY USING MAGNETS

nightlife

Re: FREE ENERGY USING MAGNETS

gotoluc

Re: FREE ENERGY USING MAGNETS

gyulasun

Re: FREE ENERGY USING MAGNETS

nightlife

Re: FREE ENERGY USING MAGNETS

petersone

Re: FREE ENERGY USING MAGNETS

petersone

Re: FREE ENERGY USING MAGNETS