hi, i saw the videos, it's so interesting.

my native language is not english, so i hope that u can get my point.

the cover, is that pure Tin? or Tin plate? (Tin plate : Tin covered ion)

Tin plate

so whats the status of this shielding?  If it works I would think you could make devices of all kinds using it.  Are there any more videos or people with test results to share?  Is this idea dead?  Can it be improved? Is this thing on?lol

I'm trying to mimic the tin shielding of james with only small magnets 1/2 long by 1/4 and 1/4 N40 ...I just try to notice any diminution of the repultion force, that's it. It's just preliminairy tests and i've notice that copper does brake the magnets a bit ...I have a plate of brass and a plate of copper at home and brass doesn't seem to do anything at all and copper when you let the magnet slide on it it slow down alot so my guess is it brakes like aluminium so "to advoid as shielding" i'm trying all materials as i go ...and also I have tin wire for welding eletronics it's 3mm dia. or 1/8 thick

see the totally not professional test but nonetheless not working here : http://www.megaverse.quotaless.com/martin.jpg

it was just a rapid test with 11/16 tin thick and only 1/16 plastic thick and there's absolutly no difference at all so i'm aware that it's wire instead of a plate but it's still really thick and there is no perceptive change so my guess is that with james shielding his tin is not only tin there must be iron in it and propably zinc also the tin must be added in this material so it's easy to nail through it...would be interesting to have a compagny name so we can contact that compagny and ask them directly.

The rounded up flat coil of tin in the photo is for melting (i intent to make a plate to rule out tin once and for all) even though it may still have a role in it all ...

Megaverse

Very interesting stuff man  . Are those neodymium magnets? I believe you just found something cool, very awesome of you to share.

Take a look at this diagram and someone make one please. I'm still in the process.
*Note that I was going to use Mu-metal as the shield but that doesnt work affectively enough as using the tin method as the shield. Wouldnt this work?*

Sorry to have to tell you this, but your contraption won't work.
Your main problem is that you lack basic knowledge of magnetic flux lines and don't see the whole picture.

The fixed magnets being shielded by the "high permeability material" isn't really shielded at all. It's pure attraction.
And the rotor magnets will be strongly attracted to the shield and it will lock them hard into this position and prohibit any "free" motion.
The attraction towards the "shield" will create a strong backpull if you force the rotor magnets past the shield. Thus no "free energy"

There is simply no such thing as a magnetic shield that isn't attracted to the magnet itself and this kill any "free movement."
This type of magnet motor shielding have been tried countless of times throughout history.
But the inventers didn't know that shielding doesn't remove the flux lines, it just reroutes them.

Ahh sadly james roney is a fuck'n'retard that don't know squat because there is no such thing as tin plates.

Apparently he can't read either because i've gone to the site of home depot and in the description it says THIN not TIN you damn stupid moron. So your holy grail must of been a beer dude

Anyway after that stupid jerk make me run like hell in that place to find answer I finally contacted the compagy in question to get some real answers and guess what there is no such thing as tin plates ...voila it's confirmed james is a moron of the worst case senario not to mention an asshole who sit on is pretentious glory and don't answer for anything ...hey, must be too occupied drinking from the holy grail huh ? ...So basically it's either aluminum which even that dumb ass would of guessed or galvanised(which means zinc plated) or plain stainless steel. that's it so both of them contain iron and guess what... MAGNETIC DOMAIN ...yes, that's it it won't work.

And before yelling succes make your search damn it ...you never heard of pot magnet that all ready do that and they are shielded mostly in steel case ?.ahh boy...


So me i'm done listening to either criminal fakers or dumb ass like this moron and i'm going to verify every thing myself (and so should you, look where it got me, no where).

So i'm appologising to the readers in advanced for the foul and probably unecessairy language but it felt damn good to smack that stupid moron in the back of the head !

Thank you for your comprehension and I hope I didn't offend you TO much, lol 

MEGAVERSE

Don't bother asking this fraud he won't respond ...I don't even think he comes here anymore but I didn't check so ...

Anyway a good explanation of all this shit ...http://www.youtube.com/watch?v=2WJDFGvWkkc

And the plastic could be absolutly anything none magnetic ...like disposable dishes ? or a multitude of plastic bags ...whaterver ( i used a couple of paper sheets taped together)... it's just for keeping spacing between the IRON plates that ARE GALVANIZED (or zinc if you wish) and has nothing to do with tin, trust me tin has nothing to do with it.

I have 4 plates of 1/8 inch in pure tin and it passes right through as if there was nothing so james is a moron in bref or i should say a dreamer ...a too damn overproud one at that.

So i hope it helps, sorry for the harshness, And i wish you succes !

Megaverse

No no ...I just didn't explain everything ...james didn't know which material he'd use and look it up in the home depot website where he buyed it and there it's writen "a thin sheet plate" (THIN, slim , as not thick) and not tin so i'm well aware that he didn't use pure tin I only use pure tin to proove it has nothing to do with it and that it's just the iron that did his job of diverting the flux and that's all...thus filling the magnetic domain and redering this whole discovery completly useless. or at least not his.

And if i'm being so harsh on him it's because of my earlier conversation with him (not here) and he's the kind of asshole who brag all the time. Just naming this the holy grail without even verifying anything in the first place tells of his arrogance and he made me search for a full month just to discover that he can't read correctly now that's a bitch don't you think, lol.

But I understand that it's not constructive and that the damn oil compagy are still dominating and we need to calm them down ...(like go make some plastics with your oil and shut the hell up hehehe).

So that's about it.

I'm sorry it wasn't up to your expectations but I still wish you luck if your trying anything !

Megaverse