Hello all, I've been following TPU research for some time, have read all SMs letters, watched all the youtube clips and read many threads. you're all doing fine work in trying to decipher it all.

This may help:

If any consecutive frames of the TPU videos show the same scene, i.e. if the camera is held on a stationary TPU for two or more consecutive frames, then this free software will allow you to stack those frames and will increase the information content of the resulting still frame:

http://www.astronomie.be/registax/

It's used by amateur astronemers to acheive super sharp images of celestial bodies using small cheap telescopes, many blurry frames of the same object are integrated together to yield a much crisper image.

I would try it myself but don't have the AVI files yet.

Easy registax tutorial:
http://www.russsscope.net/staxtutorial.htm

Hello all, I've been following TPU research for some time, have read all SMs letters, watched all the youtube clips and read many threads. you're all doing fine work in trying to decipher it all.

This may help:

If any consecutive frames of the TPU videos show the same scene, i.e. if the camera is held on a stationary TPU for two or more consecutive frames, then this free software will allow you to stack those frames and will increase the information content of the resulting still frame:

http://www.astronomie.be/registax/

It's used by amateur astronemers to acheive super sharp images of celestial bodies using small cheap telescopes, many blurry frames of the same object are integrated together to yield a much crisper image.

I would try it myself but don't have the AVI files yet.

Easy registax tutorial:
http://www.russsscope.net/staxtutorial.htm

I'm glad people know about frame stacking.  This is a little off topic but the footage from the moon landing has disappeared from its warehouse recently, right before computers were readily able to do this type of image sharpening.

There is a pan and scan video of the moon surface where the camera was left to film for about 30 seconds and then panned and filmed for another 30 seconds and so on.  Imagine what you could see on the surface of the moon with that many frames of film stacked on top of each other.  You would have a 'hi-resolution' panoramic photo of the lunar surface.  Too bad it got stolen...

Quote from: poynt99 on April 23, 2008, 04:15:55 AM

oh there's a collector there alright, and it's not wound with the controls as some have imagined

mmm, Let's suppose there is validity in this: http://www.overunity.com/index.php/topic,4549.0.html

Then I would the center toroid expect to be the collector, catching the swirling out and in magnetic field

Central toroids are, in my opinion, part of the switching mechanism for the coils.  They have nothing to do with the actual collection of any usable energy.  Notice that the torroids are never fully wound but have windings on either side.  Those windings are not connected to each other, they receive a pulse of power from their respective source which is registered by the wire running through them.  The wires running through the torroid go to the coil controller.  Think about how a galvanometer works or the control mechanism for a laser light show.
From Wikipedia.

Most new uses for the galvanometer mechanism are in positioning and control systems. Mirror galvanometer systems are used as beam positioning elements in laser optical systems. These are typically high power galvanometer mechanisms used with closed loop servo control systems. They can have frequency responses over 1 kHz.

The rim of the units is where the power comes from and is put in to.  It's a modified transformer that SM has shrouded in mystery to the point that it seems to work on mystical principles.  I think the Earth's resonance stuff is utter fluff as there is no way a unit could operate in a plane or a travelling vehicle if it relied on such an outside variable as the Schumann resonance or Eath's magnetic field.  The concept is neat but I don't think that is what is really going on inside the devices.  SM also only says this is how it works while showing the FTPU and says he doesn't know fully how the FTPU works so the "taking energy from the natural magnetic field of the Earth" sounds like tuning into the BS factor.

What I do think is possible is that the device is designed to mimic the 'big picture' of using NMR on a much smaller and controllable scale without the need or hinderance of outside variables.  Making the device like a little Earth and replicating lightning strikes with pulses from a capacitor in a controlled environment.

Can anyone pick up a Schumann resonance pulse without a huge antenna or use the Earth's magnetic field for anything other than making a compass show its flow?  SM turns his devices in all 360 degrees with no output variation.  I do notice that he turns the little tiny one upside down when he is finished with it and the FTPU shows a decline in output when turned upside down...

I'll stop typing here before I jumble my thoughts.

One more little thing for reference:
http://en.wikipedia.org/wiki/Toroidal_inductors_and_transformers

Toroidal inductors and transformers are components is in electronics, typically consisting of a circular ring-shaped magnetic core of iron powder, ferrite, or other material around which wire is coiled to make an inductor. Toroidal coils are used in a broad range of applications, such as high-frequency coils and transformers. Toroidal inductors can have higher Q factors and higher inductance than similarly constructed solenoid coils. This is due largely to the smaller number of turns required when the core provides a closed magnetic path. The magnetic flux in a toroid is largely confined to the core, preventing its energy from being absorbed by nearby objects, making toroidal cores essentially self-shielding.

In the geometry of torus-shaped magnetic fields, the poloidal flux direction threads the "donut hole" in the center of the torus, while the toroidal flux direction is parallel the core of the torus.

I know some of you will disagree with this, but I really believe the following hypothesis:

Floyd Sweet just had a rotating Aether Vortex spinning between the 2 flat magnets.  Edwin Gray had it spinning inside his special tube.  Hubbard had it spinning inside his circumference of pulsing electromagnets.  The TESTATICA Device has it spinning inside the two large cans.  SM had it spinning inside sequentially pulsing control coils arranged in a Toroid.  These are just different ways of accomplishing the same thing.

That is why most of SM's TPUs wouldn't work upside down.  When he flipped them over, the spin came to a gradual stop.  That also coincides with what SM called the "INERTIA EFFECT".  In essence, SM proved that Aether will only spin in 1 direction in the northern hemisphere.  When flipped over, no Aether spin = no output.  Neither SM nor Floyd Sweet really knew the relevance of the spinning Aether Vortex.

Remember when Sweet accidentally shorted the 2 output wires & ICE formed.  Aether Spin in Coils Produces COLD ELECTRICITY!

Remember in one video where SM said "Now you tell me why it won't work upside down."  Yes, SM is a Very Brilliant Man, but at the time he really didn't understand that the TPU output power was coming from the Aether Vortex.

I think the foregoing facts are very important for a TPU Design Concept.
.

Great concept!

I agree. My original thinking was that Steven's little magnet based switch was the cause of the unit shutting down when upended and sliding off center of the reed but after seeing the video prior to releasing here I noticed that the magnet stays in place. This also reinforces the fact that the TPU is not overly influenced by nearby DC flux as presented by the magnet(s).

Thank you for your support Jack & Sparks.

Jack, it would be of IMMENSE VALUE if you can remember which way the Compass Spun Up.  Was it clockwise or CCW?  That would tell everyone which way the Coils need to Pulse, CW or CCW, to operate properly.

SM spoke of his compass spinning up & coasting down when the TPU was shut off.  I watched all of the Low Res Films, but none of them showed a compass.

Can you remember anything on that?

Thank you Jack for all of your contributions.
.

Thank you for your support Jack & Sparks.

Jack, it would be of IMMENSE VALUE if you can remember which way the Compass Spun Up.  Was it clockwise or CCW?  That would tell everyone which way the Coils need to Pulse, CW or CCW, to operate properly.

SM spoke of his compass spinning up & coasting down when the TPU was shut off.  I watched all of the Low Res Films, but none of them showed a compass.

Can you remember anything on that?

Thank you Jack for all of your contributions.
.

Thanks first of all.


Wish I could tell you but that demo was done after I already parted company. I do believe the story though as I know in my heart that what I felt was rotary or angular transfer of energy from coil to coil. The effect was tangible and not some sense of psychic interlude with the unknown!

From what I can see the posted torrent is down, and has been down for several days. Also the MediaFire individual files folder 1, file  .z01 is corrupt so nobody is downloading at this point is looks like. If anyone else is seeding, can they please post the torrent link? Not everyone has downloaded that needs to.

Thanks

James

Now you tell me why my bulk three phase motor does not give me cold electricity.

Yes, please do!  There is something here that is different from a standard motor, so two-phase four-coil is not the secret...

I have uploaded a high quality picture of the FTPU here, highlighting two MOSFETs: http://www.overunity.com/index.php?action=tpmod;dl=item41

Eldarion