Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: HIGH QUALITY TPU DVD Video Released from Jack Durban  (Read 457899 times)

EMdevices

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 1146
Re: HIGH QUALITY TPU DVD Video Released from Jack Durban
« Reply #900 on: May 19, 2008, 04:18:40 PM »
here's more info on my setup.    thanks for the suggestions eldarion

There are lots of effects happening so I'll just mention a few.

1)  Notice I use a diode to prevent the kickback from burning out my transistor and the energy that goes in the toroid basicaly gets wasted in the resistance of the windings, which is what I wanted  (later I will cycle back the energy)  Now, this was no problem as I was putting in very little power  (millivolts from my 8 AA battery stack, about 10 volts)  Everything runs cold like it did in other blocking oscillators I built before.  (I love these oscillators  :) )    
However,  when I adjust the pot just a bit more suddenly my 4Amp rated diode started smoking, transistor heatsink got hot as hell, but the waveform didn't change all that much at the collector of the transistor.   The input miliamps went up a bit but not that much, so somehow extra energy was kicking back, and I did notice my input voltage started to float a bit higher than 10 volts to 12 or so, as if the loading eased off.    All is very strange, especially that waveform.  I was thinking the same as eldarion that the transistor is not shutting off, but it seems to be and the "bridging" between the peaks is quite unexpected and unexplainable and seems to jump around in an orderly fashin as if it's due to some rotation perhaps (left to right drift across the scope screen).  I alway thought the DC got produced as a gradual rise in the waveform due to some rotation, and perhaps this is not quite it and I'm observing something else.

2) I was scoping the collector spikes and I started to move my magnet around.   when I placed it exactly at the symetry point (at 12:00 o'clock position up top) a DC bias appeared across all the spikes, maybe 5 volts or so.  That was very interesting as well.  The magnet is realy important.

3) Sounds are very interesting.  As I increase the frequency the scope and the sound confirm the frequency is going higher.  But when I approach this particular frequency where things begin to happen,  the sound seems to go lower, while the frequency (per the scope)  goes higher.  I also find this odd.

4) I placed a very high value capacitor (like SM uses in the LTPU, those yellow caps)  and I got very nice pure sinusoids at half the pump frequency, parametrically pumped.   But no strange effects.   So, this makes me think the secret lies with a particular combination of frequencies that hit some magical acoustic frequency of the core in conjunction to the parametric excitation and who know what else, perhaps a fluctuation in the magnetic field that surrounds us, or even NMR.    These devices sure need a lot of studying to find out exactly what is occuring.

Anyway, I will be changing the configuration and pumping the symetry coils and looking for a DC potential across the taps of it  (it's that finding the potential task).  This was what I was going to do in the first place as per the theory but I was just trying to get my oscillator going so I made this change and stumbled on this interesting interaction.

EM

Nali2001

  • Sr. Member
  • ****
  • Posts: 396
Re: HIGH QUALITY TPU DVD Video Released from Jack Durban
« Reply #901 on: May 19, 2008, 04:25:35 PM »
Re: Jack Durban

He came
He lied
He got what he wanted
He went!

I think Jack had fooled himself into thinking there is a way of making a commercial TPU.
I know we won't see him round here again!

Re: Jack Durban
He came
He gave you/us all a better quality video, useful or not
He got ridiculed
Some little wannabe 'tpu-elites' bitched like useless lowlifes with no bit of gratitude




i_ron

  • Hero Member
  • *****
  • Posts: 1170
Re: HIGH QUALITY TPU DVD Video Released from Jack Durban
« Reply #902 on: May 19, 2008, 04:35:40 PM »

Did I work with you several years ago?  You seam very familiar?

I ignore your attempt to yank my chain...



Grumpy,

I know, a bit too obvious, LOL

Nope, we have never met, unless you live in Canada?

I am still in learning mode here, both with the device and Harti?s site. I have only been following three threads so have missed most of your previous posts. But there is such a volume of written material here now it is almost impossible to read it all.

However in following up on EM?s helpful reply I found out that by clicking on the box at the bottom of the page takes one up to the next level, where I found his stuff? and some of yours.

So I found your post that links to David Wilcock?s Ascension series?

http://www.divinecosmos.com/index.php?option=com_frontpage&Itemid=1

I had previously read the three books and have no problem with the content, I recommend them
for anyone who is seeking information on the aether and spiritual progression.

But I went back and re-read the section on Dr Nikolai Kozyrev?

http://www.divinecosmos.com/index.php?option=com_content&task=view&id=334&Itemid=30

OK, I can retract my questions as I now understand your usage of the terms torsion and tempic fields.

I will post the link here in case anyone else has the same questions I had. The Kozyrev material is in book three, ?Convergence?, if I have it right the second link is the abbreviated version as posted in Nexus, worth the read.

Thanks Grumpy

Ron

wattsup

  • Hero Member
  • *****
  • Posts: 2606
    • Spin Conveyance Theory - For a New Perspective...
Re: HIGH QUALITY TPU DVD Video Released from Jack Durban
« Reply #903 on: May 19, 2008, 05:17:16 PM »
Just got back home from a nice long weekend out with the wife. (Monday is holiday.) I had my son check the forum to see what was going on this thread. lol  I see JD got hammered by Stefan. Also JD got some more info and SM is crying the same National Security tune. I will post something about that later.

@simonmagus

Thanks for that photo on previous page. I had that as my desktop background for over a year. It is simply an awesome hurricane image of natural energy being manifest.

@EM

Please be careful. Man do you wind fast. That is a great unit. You should have one or two fuses in the set-up. Actually the unit could be made is so many ways.

The FTPU winding map is coming along slowly but surely as I get back on it. But I don't want to wait to give you some idea on how the TPU works as I have seen the device so close up wit my hand drawn diagrams all over the place. At least I will explain how I see the driver side working.

@EM the first thing to always keep in mind is the one component that is in all the TPUs. All the TPUs have center or side toroid(s), even the OTPU has one behind the circuit board. The STPU also has a small one. All of the units have toroids. So what is this toroid doing. This toroid is the main traffic cop for the system for both pulsing and flyback recycling.

Firs of all let's understand that when I say flyback, this is not BEMF (I hate that word. lol). Flyback is the field collapse at pulse off. I am not talking about BEMF.

So I think you need to integrate the center toroid inside your build. I would use it plus two diodes to isolate the transistor from the control coils. Hard to explain. It would be additive. My EE is the shits. I'll try again.

The Center Toroid has two coils, TC1 and TC2.

In the TPUs there is only one pulse source required. The pulse goes through two parallel diodes (protection) then from one diode to TC1 and the other diode to TC2. The other side of TC1 goes to Control Coil 1 (CC1) and the other side of TC2 goes to CC2.

The control coils are wound either two or four, it does not matter. As long as they are wound in the same direction.

When the pulse enters the TC1 and TC2, voltage is increased and sent to the coils CC1 and CC2. When the pulse if off, the flyback of CC1 returns to TC1, crosses the core and pulses TC2 that pulses CC2. And, vis versa, the flyback of CC2 returns to TC2, crosses the toroid core and pulses TC1 that pulses CC1. On each single on/off pulse, you get two pulses, (actually four pulses) always going the same way on the control coils. hehe. I can't wait to try this.

You are right about the green coil. It is also seen on the FTPU, although I am convince the FTPU was only showing radiant energy voltage of 61 volts and not any usable amperage because the CC's were so slim. The green coil is used to energize the transistor base side. This gives the feedback to the transistor that it is time to pulse again.

I think also the OPTU was producing radiant energy and he used batteries in the lamp bases to get the illusion across, but the principle is there. I can make a very solid case for this but will not here.

So right now your SS is being massacred by all that flyback. Even with a diode. It is direct in the line so you are losing control of the pulsing. Not good. With the center toroid, this will act as a non-SS way of directing the flyback back into the control coils. If you do not understand this, please let me know and I will explain it further.

This is so simple. It is like a double slinky. Energy is traveling in two directions inside the center toroid but the control coils only see energy pushed in one direction.

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: HIGH QUALITY TPU DVD Video Released from Jack Durban
« Reply #904 on: May 19, 2008, 05:32:05 PM »
"If there is a National Security restriction on this technology there is little doubt that this site is being monitored and anyone openly disclosing such a technology is going to be investigated."

Reminds me of the new invention Dave Squirres is trying to patent now.

Too bad I have promised him not yet to talk about it...

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: HIGH QUALITY TPU DVD Video Released from Jack Durban
« Reply #905 on: May 19, 2008, 05:38:41 PM »
here's more info on my setup.    thanks for the suggestions eldarion

There are lots of effects happening so I'll just mention a few.

1)  Notice I use a diode to prevent the kickback from burning out my transistor and the energy that goes in the toroid basicaly gets wasted in the resistance of the windings, which is what I wanted  (later I will cycle back the energy)  Now, this was no problem as I was putting in very little power  (millivolts from my 8 AA battery stack, about 10 volts)  Everything runs cold like it did in other blocking oscillators I built before.  (I love these oscillators  :) )     
However,  when I adjust the pot just a bit more suddenly my 4Amp rated diode started smoking, transistor heatsink got hot as hell, but the waveform didn't change all that much at the collector of the transistor.   The input miliamps went up a bit but not that much, so somehow extra energy was kicking back, and I did notice my input voltage started to float a bit higher than 10 volts to 12 or so, as if the loading eased off.    All is very strange, especially that waveform.  I was thinking the same as eldarion that the transistor is not shutting off, but it seems to be and the "bridging" between the peaks is quite unexpected and unexplainable and seems to jump around in an orderly fashin as if it's due to some rotation perhaps (left to right drift across the scope screen).  I alway thought the DC got produced as a gradual rise in the waveform due to some rotation, and perhaps this is not quite it and I'm observing something else.

2) I was scoping the collector spikes and I started to move my magnet around.   when I placed it exactly at the symetry point (at 12:00 o'clock position up top) a DC bias appeared across all the spikes, maybe 5 volts or so.  That was very interesting as well.  The magnet is realy important.

3) Sounds are very interesting.  As I increase the frequency the scope and the sound confirm the frequency is going higher.  But when I approach this particular frequency where things begin to happen,  the sound seems to go lower, while the frequency (per the scope)  goes higher.  I also find this odd.

4) I placed a very high value capacitor (like SM uses in the LTPU, those yellow caps)  and I got very nice pure sinusoids at half the pump frequency, parametrically pumped.   But no strange effects.   So, this makes me think the secret lies with a particular combination of frequencies that hit some magical acoustic frequency of the core in conjunction to the parametric excitation and who know what else, perhaps a fluctuation in the magnetic field that surrounds us, or even NMR.    These devices sure need a lot of studying to find out exactly what is occuring.

Anyway, I will be changing the configuration and pumping the symetry coils and looking for a DC potential across the taps of it  (it's that finding the potential task).  This was what I was going to do in the first place as per the theory but I was just trying to get my oscillator going so I made this change and stumbled on this interesting interaction.

EM

EM,
great results !

So you say you used just milliamps at
10 Volts input,
so this is normally only less than 1 Watts or
even more less...
Then it should not get warm and also not smoke
at this power level !
You must have put put at least more than 10 Watts contineously to get it hot..

You really must have hit the right catalysation effect.

Please study it carefully and let us know.
Be sure to put a fuse in series with your transistor or coils...

Do you also have iron wire in your coils ?

What is your core you have wound it onto ?
Is this a ferrite core or just the output coil ?

Many thanks.

EMdevices

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 1146
Re: HIGH QUALITY TPU DVD Video Released from Jack Durban
« Reply #906 on: May 19, 2008, 05:50:12 PM »
Hi Stefan, there is no iron wire, the only iron is the core, it is a roll of steel ribbon, found it on the ground close to the Shipping and Receiving area of a company, probably used to tie down boxes or wooden crates.
EM

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: HIGH QUALITY TPU DVD Video Released from Jack Durban
« Reply #907 on: May 19, 2008, 06:01:42 PM »
Hi Stefan, there is no iron wire, the only iron is the core, it is a roll of steel ribbon, found it on the ground close to the Shipping and Receiving area of a company, probably used to tie down boxes or wooden crates.
EM

Hi EM,
so are the single layers ofthis iron ribbon
isolated ?
Did the heat come from it or
from your transistor  or from your coils ?

What voltage and amps do you get at the output,
when the conversion process starts ?

Many thanks.

EMdevices

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 1146
Re: HIGH QUALITY TPU DVD Video Released from Jack Durban
« Reply #908 on: May 19, 2008, 06:13:48 PM »
well, the ribon layers are not isolated, ( it was a long strip and I wound it up like a roll of tape.)  It was a bit rusty too, so I figure it's ok, the surface resistance should be high enough.

The heat came from the diode and the transistor, I did not touch the core. At the time I smelled the smoke, I was watching the scope and how the peaks were "bridging" together into long chains and the sounds where changing, all was very exciting, so when I smelled the smoke I quickly unpluged the battery and touched the diode and I got burned, thing was unbelivably hot.  Then I touched the transistor heatsink (coutiously this time)  and it was very hot as well.   Like I said, just a short frequency away the thing was running cold, and not just for a few seconds, for minutes.

As far as the "output"  I'm not sure what to call an output at this point I was looking to see what happens with the setup and if I can get parametric oscillations.  The briging waveform was a few volts, and depends highly on the polarity of the magnet to bias the core, if I reverse the polarity it's almost in the noise floor.   Magnet is key.    On the other hand,  in a later experiment I was looking at the bias winding, but this time a bit away from that specific frequency, and I could see spikes up to 60 volts, perhaps I'm writing from memory now and I'm mixing things up since the diode would short that out, but perhaps that's why it gets hot. 

EM

wattsup

  • Hero Member
  • *****
  • Posts: 2606
    • Spin Conveyance Theory - For a New Perspective...
Re: HIGH QUALITY TPU DVD Video Released from Jack Durban
« Reply #909 on: May 19, 2008, 08:19:53 PM »
Well I didn't want to wait any longer so I am starting to wind my toroid. I want to do some tests on flyback transfer and this can be done with this toroid and I'll use two microwave transformers, two diodes, one resistor on the base of one transistor. lol

I just took a photo to show any of you how to wind the toroid without creating a mess.

I just put a dent into each end of a piece of wood and rounded the edges so the wound wire would not create any bends. It is working out really great. Just release one wire length at a time on the wood via the red tape and start winding.

dcarlson

  • Newbie
  • *
  • Posts: 8
Re: HIGH QUALITY TPU DVD Video Released from Jack Durban
« Reply #910 on: May 19, 2008, 08:31:05 PM »
I wonder if this is the same device.
05/19/08 - Bangladeshi Inventor Has Demonstrated Fuel Free Magnetic Power!
After 17 years of research, 37 year old inventor Giasuddin Kachi in Bangladesh has shown professors from an engineering university, as well as other scientists and electrical engineers, that he has created magnetic energy conversion systems that produce electricity without any need for fuel. The professors commented that this invention challenged fundamental principles of electricity and energy conservation. The first public demonstration of Kachi's invention was apparently at the Chittagong International Trade Fair, earlier this year. He showed that his generator could power a drill requiring 800 watts. It then lit a 500 watt lamp. He claims to have experimentally produced up to 10,000 watts of power. He believes his invention can eventually be scaled to 10, and then to 50, megawatts. Units of such large size can be utilized to replace the need for coal or uranium fueled power plants. Earlier this month, after observing the invention, a visitor to his facility said in correspondence to us: "He uses two circuits. One is a primary circuit and initially needs external power to excite the device. Afterwards, it is excited or energized by a secondary circuit, which is induced by the primary circuit. It continues to operate indefinitely. A very small part of the power of the secondary circuit is used to energize the primary circuit. The remaining electrical energy produced by the secondary circuit is used to power an external load". - Source
http://www.renewableenergyworld.com/rea/partner/story?id=52485


EMdevices

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 1146
Re: HIGH QUALITY TPU DVD Video Released from Jack Durban
« Reply #911 on: May 19, 2008, 08:41:47 PM »
thanks dcarlson,

I found this link as well:    http://www.peoples-view.org/day_by_day/2008/04/20/Chittagong_Highlights.php

shows a nice photo

EM
« Last Edit: May 19, 2008, 09:23:31 PM by EMdevices »

Earl

  • TPU-Elite
  • Sr. Member
  • *******
  • Posts: 435
Re: HIGH QUALITY TPU DVD Video Released from Jack Durban
« Reply #912 on: May 19, 2008, 10:25:23 PM »
@dcarlson, @EM

the correct thread for the Bangladesh invention is:

http://www.overunity.com/index.php/topic,4532.msg90868.html#msg90868

not here.

Earl

MeggerMan

  • TPU-Elite
  • Sr. Member
  • *******
  • Posts: 497
Re: HIGH QUALITY TPU DVD Video Released from Jack Durban
« Reply #913 on: May 20, 2008, 12:32:31 AM »
@Jack,
If you are able to contact SM there are a few questions some of us would like you to ask SM on our behalf, they do not have to be too much related to the working of the TPU so that he would still be able to answer them.
Is this possible?

Couple off the top of my head:
1. What gave him the idea for the TPU?
2. Are UEC developing the TPU further?
3. Does he still have a TPU in his possession?
4. Could he build one from scratch today?

There are loads of other questions that I cannot think of right now.

Regards
Rob

MACEDONIA CD

  • Sr. Member
  • ****
  • Posts: 388
Re: HIGH QUALITY TPU DVD Video Released from Jack Durban
« Reply #914 on: May 20, 2008, 01:16:48 AM »
hi 
@EM
IS GOOD  THAT YES   I HAVE  ALL READY PROVE WHIT MY SMALL TOROID  WHAT  IS IMPORTANT  THIS  SMALL PERM .MAGNETS
if you  see my  clip  i showw that   
DID YOU MESURING  YOU IN  <<FREKFENCY   AND OUT FREKFENCY     SEE   THIS  IF THERE THE  SAME
IN FREK  AND OUT FREK 
 MY   TEST IS   WHITOUT   OSCILATOR    I   HAVE ONLY    SINUS   FREK  50HZ
AND  I HAVE FIND  DIS
IF  I   PUT MAGNET I HAVE  MORE V  AND  MORE  milli amps  when i put magnets
and  i have  more   high frek   only  in my  out coil

this simple toroid  transformer  is   <i put  in the prymary  50hz  and i have   200 hz out 
if i  increase the   out frek   whit the same in  frek. <50hz>
i  whill have    in my scope more continues  kicks  and  dc vol;ts
im sure  you  are made  some like  my  test   but whit oscilator
MAKE  YOU TOROID  INPUT COIL WHIT PUSH  PURE SINUS THERE  AND  THEN PUT  AND TUNE  EXSACTLY  PUTING YOU  MAGNET  AND SEE   WHAT  IS YOU FREK  THERE 
I THING IF YOU  INCREASE THE OUT FREK   MORE THEN IN FREK  YOU  WHILL SEE MORE DC  CONTINUES IN YOUR  SCOPE YOU DIVICE IS CLOUSE LIKE MY 
BUT MY HAS  SOMETHING IN THE CENTER  <<IS NOT ELKTRONICS AND  NOT  BATERY