Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Complete information on working SM style device.  (Read 362533 times)

giantkiller

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 2791
    • http://www.planetary-engineering.com
Re: Complete information on working SM style device.
« Reply #630 on: October 03, 2009, 04:10:59 AM »
Ride 'em, cowboy! Yee ha!

You are not driving a car on 100% HHO so shut the fuck up, dipshit.

sigma16

  • Full Member
  • ***
  • Posts: 193
Re: Complete information on working SM style device.
« Reply #631 on: September 16, 2010, 12:48:06 AM »
Further information realted to the TPU can be foudn here.  It is posted under "Tesla" since he discovered the essential effect.

http://www.overunity.com/index.php?topic=9749.msg257229#msg257229

Bulgar

  • Newbie
  • *
  • Posts: 4
Re: Complete information on working SM style device.
« Reply #632 on: October 04, 2010, 11:14:28 PM »
Hello!
Working on tetrahedron about a year and a half.
Use the DDS generator based on AD9835.
Here we use the scheme to phase shift:
http://img185.imageshack.us/img185/9769/tpudrivingcircuit.gif
Limiting the pulse duration with 74HC123, and now from the one shot with the MOSFET drivers, mosfets & RCD clamps and etc.

You can explore some of the pictures and diagrams that I've experimented with here:
http://mazeto.net/index.php?topic=739.0

I tried different designs, and concluded that he had to work with higher frequencies.
The one I can think of avalanche transistors are the variety of ZTX415.

Greetings, I accept any ideas and suggestions!

sigma16

  • Full Member
  • ***
  • Posts: 193
Re: Complete information on working SM style device.
« Reply #633 on: October 05, 2010, 04:06:05 PM »
Hello!
Working on tetrahedron about a year and a half.
Use the DDS generator based on AD9835.
Here we use the scheme to phase shift:
http://img185.imageshack.us/img185/9769/tpudrivingcircuit.gif
Limiting the pulse duration with 74HC123, and now from the one shot with the MOSFET drivers, mosfets & RCD clamps and etc.

You can explore some of the pictures and diagrams that I've experimented with here:
http://mazeto.net/index.php?topic=739.0

I tried different designs, and concluded that he had to work with higher frequencies.
The one I can think of avalanche transistors are the variety of ZTX415.

Greetings, I accept any ideas and suggestions!
Make a large solenoid coil that will fit around the entire tetrahedral device so that all four coil are within the magnetic field fo the solenoid

Power the solenoid with dc from a 7ah 12v battery or dc power supply of at least 12v.  High voltage is better.

This will lower the frequency required to achieve the rotation effect.

giantkiller

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 2791
    • http://www.planetary-engineering.com
Re: Complete information on working SM style device.
« Reply #634 on: October 05, 2010, 09:54:52 PM »
I am progressing towards 4kv-50kv as a bias for the charge pump I am building.
The signal is reported to travel at 26xSOL in the field outside the wire. Podkletnov papers.

Bulgar

  • Newbie
  • *
  • Posts: 4
Re: Complete information on working SM style device.
« Reply #635 on: October 05, 2010, 11:06:32 PM »
Last I tried it and got the best results:
http://mazeto.net/index.php?action=dlattach;topic=739.0;attach=16162;image
The 4 coils are of such a configuration. Do not get anything abnormal except higher voltage in a collector ~ 50V and a few milliamperes current.
http://mazeto.net/index.php?action=dlattach;topic=739.0;attach=16154;image
90% of the trials conducted by the bifilar winding and iron yoke delay.

sigma16 @ This is not going to happen with a permanent magnet?
For model 15 cm in height what should be the proportion of approximately? Current in the coil what should be? Okay be limited by the resistor?
Maybe Ill try your idea first, would take time to build a high-frequency circuit. /ZTX415 ..../

These days, read mise dealing with something simple. I will experiment with a Tesla transformer. With bifilar primary/secondary and any lag ciruits. Would we get a magnetic vacuum?

giantkiller @ Thanks to review, would be interested!

Regards!

sigma16

  • Full Member
  • ***
  • Posts: 193
Re: Complete information on working SM style device.
« Reply #636 on: October 06, 2010, 12:07:39 AM »
Don't mix Tesla transformer with single wire coils.   The tetrahedral device uses single-wire coils of very long wire length and high voltage positive pulses.  Remember that Spherics said if you double the amount of wire then you double the effect but the power applied remains the same.

The same magnetic field has to encompass all four coils.  You can use a large rheostat to adjust the current to the solenoid coil and connect to a battery.

Bulgar

  • Newbie
  • *
  • Posts: 4
Re: Complete information on working SM style device.
« Reply #637 on: October 06, 2010, 10:41:24 AM »
In the "Tesla" design I wanted to achieve high voltage winding of tetrahedron and it worked. I think the problem is that they are magnetically coupled.

Long coils? This is new to me. How much longer? How to solve the problem of skin effect? /current will terribly small => low power of pulses/ The use of bifilar windings and delay group thought that to obtain the magnetic vacuum.

To keep the low frequencies? with the current scheme can not work with more than 300-400kHz for the oneshot 74123 multivibrators and mosfets. The external solenoid will reduce the required frequency to so?

I would be grateful if I receive a response to these uncertainties. And I can began to work. ;)

sigma16

  • Full Member
  • ***
  • Posts: 193
Re: Complete information on working SM style device.
« Reply #638 on: October 06, 2010, 04:08:18 PM »
In the "Tesla" design I wanted to achieve high voltage winding of tetrahedron and it worked. I think the problem is that they are magnetically coupled.

Long coils? This is new to me. How much longer? How to solve the problem of skin effect? /current will terribly small => low power of pulses/ The use of bifilar windings and delay group thought that to obtain the magnetic vacuum.

To keep the low frequencies? with the current scheme can not work with more than 300-400kHz for the oneshot 74123 multivibrators and mosfets. The external solenoid will reduce the required frequency to so?

I would be grateful if I receive a response to these uncertainties. And I can began to work. ;)

The "bifilar wire method", where both wores are pulsed and one is delayed is a method of pulse compression to achieve a higher voltage pulse that is shorter than the pulse you applied.   You can achieve the same results with higher voltage and a single wire coil. 

Placing a solenoid around all of the coils will lower the required repetition frequency to the low kHz range.

The coils are not magnetically coupled.  They generate a field of force similar to a charge and this is produced sequentially to impart movement to the field.  Like charge in motion, it is inductive.

Bulgar

  • Newbie
  • *
  • Posts: 4
Re: Complete information on working SM style device.
« Reply #639 on: October 07, 2010, 12:42:11 AM »
Giantkiller colleague spoke for 4-50kV. This is a lot and I can not imagine it applied to the inductive load.
About 310V Are? With the multiplier can pick up to 600-900V power supply.
Does it matter the direction of rotation of the field produced by XYZ, because spherics no mention of this. / According to a torsion theory should have /
 How should foreign-oriented magnetic solenoid? / Such use and Stefan Marinov in Magvid, and perhaps for the same reason /.

Sigma16 @'ll be glad to know your ideas on what theory is based.

This technology will make the world a better place if people become humble.

Thanks guys! Hopefully one day  to we drink beer. :D

I plan to finish the stupid questions and gets to work.

С нами бог! /God is with us!/

giantkiller

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 2791
    • http://www.planetary-engineering.com
Re: Complete information on working SM style device.
« Reply #640 on: October 07, 2010, 01:26:45 AM »
The higher voltage gives higher near field density. Think of compressed medium. Within this the 2 interacting frequencies shock this medium pushing it along or tsunamis caused by earthquakes. Think of magnetic bullets. The medium contains the effort. Without it the energy just flies off into space in all directions breaking equipment and bruising bodies.
I am applying a thickness around the interaction. A listener to the sound. A transmitter for the transmission.

e2matrix

  • Hero Member
  • *****
  • Posts: 1956
Re: Complete information on working SM style device.
« Reply #641 on: October 07, 2010, 03:47:23 AM »
Last night I was playing a large crystal healing bowl over a foot in diameter and probably 15" deep.  You slowly and evenly move a suede covered wand around the rim of the bowl.  What was interesting is that on the first rotation around the bowl and maintaining even pressure at all times the sound was not very loud.  As the second, third, fourth and fifth circles were completed the sound became louder and louder while still maintaining the same speed and pressure.  I thought of the TPU and how much similarity this process probably has to what is sought in the TPU.  We start sound by vibrating the wand along the rim of the bowl but some of that sound starts setting up a resonance in the bowl that keeps increasing in strength.  While I think most of what is happening is obvious I wonder if there are some insights we can glean from such a simple instrument to apply to the TPU.  Maybe or maybe not but it was an interesting experience for me to see how the same input energy kept producing more and more output sound over a period of time.  If that bowl had been a straight flat edge I'm sure the sound would not have increased over time.  Geometry is important in this as I suspect it also is important in the TPU.  The sound is initiated at the point where the wand meets the edge of the bowl.  If one goes too slow you will not get a vibration and if you are going too fast you won't get a smooth sound or consistent vibration.  You learn to sense a speed that feels like you are pushing the sound around in a way that will increase the overall loudness.  Once it's at full loudness it still takes very little effort to keep it going.  It all just sounds so familiar to what I read is needed in the TPU.  I think part of the challenge is to understand how to replicate electrically what is happening mechanically in a crystal bowl such as this. 

sigma16

  • Full Member
  • ***
  • Posts: 193
Re: Complete information on working SM style device.
« Reply #642 on: October 07, 2010, 04:21:07 PM »
Giantkiller colleague spoke for 4-50kV. This is a lot and I can not imagine it applied to the inductive load.
About 310V Are? With the multiplier can pick up to 600-900V power supply.
Does it matter the direction of rotation of the field produced by XYZ, because spherics no mention of this. / According to a torsion theory should have /
 How should foreign-oriented magnetic solenoid? / Such use and Stefan Marinov in Magvid, and perhaps for the same reason /.

Sigma16 @'ll be glad to know your ideas on what theory is based.

This technology will make the world a better place if people become humble.

Thanks guys! Hopefully one day  to we drink beer. :D

I plan to finish the stupid questions and gets to work.

С нами бог! /God is with us!/

74123 is fast enough.  Motorola makes a few multivibrators that are much faster, but then MOSFETs are slow.

300v is enough, and 600v or 900v is better

ZTX avalanche transistor is nice but expensive.  With variable voltage power supply of 200v to 1000v and 10ma or greater current you can test most transistors for avalanche voltage and find ones that are cheaper than ZTX type.  I am using a series string of 2N5551 with good results.  Keep in mind that most circuit board materials will leak at higher voltages and leakage current will be too great to allow avalanche.

Solenoid IS oriented like solenoid in MAGVID of Marinov - probably for same reason

Counterclockwise for north hemisphere of earth without solenoid, but solenoid allows either direction depending on solenoid orientation.  Solenoid direction is north pole up and counterclockwise coil field rotation.

Apply torsion theory.

Super God

  • Sr. Member
  • ****
  • Posts: 419
Re: Complete information on working SM style device.
« Reply #643 on: June 12, 2011, 08:20:17 AM »
Hello,

I was looking over spherics posts, especially the parts about saturable inductors and I have a question:

Do the LC oscillators control the saturable inductors or do the saturable inductors switch the LC oscillators to their respective control coil?

Thank you fellow experimenters!

Super God

  • Sr. Member
  • ****
  • Posts: 419
Re: Complete information on working SM style device.
« Reply #644 on: June 13, 2011, 12:18:12 AM »
The only problem is the rise and fall times I would assume would be too slow for the control coils, I'll give it a shot though. So the saturable inductors would be switches for the LC oscillators, thus limiting the current from the collector back into the control windings...