Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Complete information on working SM style device.  (Read 362527 times)

Peterae

  • Sr. Member
  • ****
  • Posts: 327
Re: Complete information on working SM style device.
« Reply #585 on: December 13, 2008, 11:45:38 PM »
Hi Poynt
Yer theres decoupling all over the place but all using sm caps on the reverse side of the pcbs.
Ive mainly used 0.1uf but am starting to add extra 0.01uf , all the larger caps are low esr and also use 1uf low esr sm caps for the psu;s as well in all there are 6 seperate psu's in all the modules.
The noisey gnd on the scope shot was because i only used 1 scope probe gnd connected to a sma screw on the case, i relaized afterwards and checked across the chip outputs and the noise wasnt there, the output pulse is relatively clean anyway and because my fet drivers only switch at the mid logic level transistion they are fairly noise resistant.

I am very happy with the new digital mono config, it would have been even better if i didnt need to use the schmit inveter logic to negate the delayed pulse output which drives my fet driver.
Lots more tests to do yet.

Cheers for the heads up

Peter

NewAge

  • Newbie
  • *
  • Posts: 28
Re: Complete information on working SM style device.
« Reply #586 on: December 20, 2008, 03:48:51 PM »
Above goes to diagram.

Yes, this is what I described. Thanks for the diagram.

This diagram shows you what is needed to get a kick, and view a kick on an oscilloscope.

No iron as a core. Wind on a stiff poly pipe. Use copper wire for the windings.
Keep the delay coil 2+ feet away from the bifilar coil.
Keep the bifilar as far away as possible from your oscilloscope and permanent magnets.
Pulse with a square wave.
Tune as per previous post.
I am sorry - what permanent magnets and delay coils is he talking of?

Antimon

  • Jr. Member
  • **
  • Posts: 81
Re: Complete information on working SM style device.
« Reply #587 on: December 20, 2008, 06:06:48 PM »
Wow, someone is interested in this experiment :)

You don't need permanent magnets. A delay coil is a poor way to create a delay. Nowadays you should use a microcontroller for precise timing. The tuning with a delay coil is horrible.

A.

NewAge

  • Newbie
  • *
  • Posts: 28
Re: Complete information on working SM style device.
« Reply #588 on: December 20, 2008, 07:42:14 PM »
Wow, someone is interested in this experiment :)

You don't need permanent magnets. A delay coil is a poor way to create a delay. Nowadays you should use a microcontroller for precise timing. The tuning with a delay coil is horrible.

A.
Great! We shall move on without magnets.

OK, from what I understand so far the key to succesfull working device is a precise calculation of the size of control coils/number of turns/section, distance from the corners so that they overlap and create the required magnetic void as shown on the Tao's emulation. Any idea how this could be done?
« Last Edit: December 21, 2008, 09:37:23 AM by NewAge »

innovation_station

  • Hero Member
  • *****
  • Posts: 5134
Re: Complete information on working SM style device.
« Reply #589 on: December 21, 2008, 09:33:09 PM »
lol well now that is funny  8)

i could have added this peice to the puzzel but i did not

sure i know where it fits and i know what it means ....  ;D

but we aint there YET!!   ya know  ;D

great job tho  ;)

ist

parallel hummmmmm

duff

  • Sr. Member
  • ****
  • Posts: 298
Re: Complete information on working SM style device.
« Reply #590 on: January 02, 2009, 07:58:39 AM »


Above goes to diagram.

Yes, this is what I described. Thanks for the diagram.

This diagram shows you what is needed to get a kick, and view a kick on an oscilloscope.

No iron as a core. Wind on a stiff poly pipe. Use copper wire for the windings.
Keep the delay coil 2+ feet away from the bifilar coil.
Keep the bifilar as far away as possible from your oscilloscope and permanent magnets.
Pulse with a square wave.
Tune as per previous post.

I am sorry - what permanent magnets and delay coils is he talking of?

With reference to the above Spherics post, it appears the original post has lost it's reference to the quoted images from EMdevices. You can click on the link that is still referenced there to view it.

http://www.overunity.com/index.php?topic=4297.msg85123#msg85123

This creates confusion because of the EMdevice post/image directly above it.

-Duff

Fritz1

  • Newbie
  • *
  • Posts: 2
Re: Complete information on working SM style device.
« Reply #591 on: January 02, 2009, 07:36:25 PM »

Has anyone watched the TPU with a heat camera to see how the heat propagates through the device? Does anyone know where the heat buildup starts? I haven't built a TPU yet and I don't have a thermal camera. Just a question.

BEP

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 1289
Re: Complete information on working SM style device.
« Reply #592 on: January 02, 2009, 11:54:56 PM »
Has anyone watched the TPU with a heat camera to see how the heat propagates through the device? Does anyone know where the heat buildup starts? I haven't built a TPU yet and I don't have a thermal camera. Just a question.

 :)
I have a IR camera but no TPU that works so I can't help.

Fritz1

  • Newbie
  • *
  • Posts: 2
Re: Complete information on working SM style device.
« Reply #593 on: January 04, 2009, 06:01:27 PM »
Thanks BEP.

Tito L. Oracion

  • Hero Member
  • *****
  • Posts: 2203
Re: Complete information on working SM style device.
« Reply #594 on: January 19, 2009, 07:56:27 AM »
I just want you to see this maybe it can help.

http://www.scribd.com/doc/95105/The-Hendershot-Motor-Mystery



otits

Tito L. Oracion

  • Hero Member
  • *****
  • Posts: 2203
Re: Complete information on working SM style device.
« Reply #595 on: January 19, 2009, 08:12:34 AM »

sparks

  • Hero Member
  • *****
  • Posts: 2528
Re: Complete information on working SM style device.
« Reply #596 on: January 19, 2009, 05:12:17 PM »
  Thankyou  Tito

 
        There has been proven by main stream physicists that there exists a magnetic relativity between the core of a torroidal solenoid and the ambient magnetic field.  It has also been proven that there exists an electric relativity between the space inside a charged sphere and the ambient electric field.
   These could be said to be monopoles.  The electric and magnetic field gradients normally a product of charged moving mass are now overpowered by the gradient between the monopoles and other scources of polarized space.
The effect on for example the 27volt electric field gradient between an electron and a proton in a 1s orbital would be overidden by the stronger electric field gradient established by the monopole.  Another effect would be the alignment of the magnetic moments of both the electrons and neucleui to the newly formed magnetic field gradient.   This alignment of mass to the newly formed electromagnetic field gradient would create a lattice of mass which would appear to the field as cold or without randomized inertial effects.  Changing the field into a superconductor.

Grumpy

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 2247
Re: Complete information on working SM style device.
« Reply #597 on: March 04, 2009, 08:56:38 PM »
The Quest for the TPU is still at hand.

AhuraMazda

  • Hero Member
  • *****
  • Posts: 564
Re: Complete information on working SM style device.
« Reply #598 on: March 04, 2009, 10:46:42 PM »
        There has been proven by main stream physicists that there exists a magnetic relativity between the core of a torroidal solenoid and the ambient magnetic field.  It has also been proven that there exists an electric relativity between the space inside a charged sphere and the ambient electric field.
   These could be said to be monopoles.  The electric and magnetic field gradients normally a product of charged moving mass are now overpowered by the gradient between the monopoles and other scources of polarized space.


@sparks
Do you have any references please?

giantkiller

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 2791
    • http://www.planetary-engineering.com
Re: Complete information on working SM style device.
« Reply #599 on: March 04, 2009, 11:31:11 PM »
Sounds like T.H. Moray.
http://www.tesla.hu/moray/moray.htm
The Sea of Energy in which the Earth floats link.

--giantkiller.