Author Topic: Complete information on working SM style device. (Read 364065 times)

poynt99 · « **Reply #510 on:** September 16, 2008, 11:34:50 PM »

is anyone here up to the challenge of working with the document i uploaded and or working toward the next step of correlating it to SM's devices? or are all just waiting for it to be handed to you on a silver platter? i thought there would be some discussion about it thus far but since there have been no pm's to me or posts on it, apparently no one is looking at it. wow, seems to me that a lot of the hard work was just done for you, but it's not getting through i guess. i'm not asking you to work with me or help me, i'm wondering if anyone is alive out there and can see any value in what was presented. if it's trash then you can say so.

Mannix? any comment?

turbo · « **Reply #511 on:** September 17, 2008, 12:13:49 AM »

Quote from: otto on September 15, 2008, 01:04:37 PM

Hello all,

Just a short one about cores:

some people forgot Esa Manu and his posts??

Otto

That was a whole diffrent story.

Quote from: poynt99 on September 16, 2008, 11:34:50 PM

seems to me that a lot of the hard work was just done for you

Get a life.

Quote from: poynt99 on September 16, 2008, 11:34:50 PM

are all just waiting for it to be handed to you on a silver platter?

Finally you start to understand what is happening.

Quote from: otto on September 15, 2008, 06:24:34 AM

Hello all,

I HAVE success.

Otto

Show me yours and i will show you mine.....

poynt99 · « **Reply #512 on:** September 17, 2008, 01:10:51 AM »

Quote from: -[marco]- on September 17, 2008, 12:13:49 AM

Get a life.

of course you're right marco; it was "easy".

the ball is in your court then.

Grumpy · « **Reply #513 on:** September 17, 2008, 01:44:26 AM »

Quote from: poynt99 on September 16, 2008, 11:34:50 PM

is anyone here up to the challenge of working with the document i uploaded and or working toward the next step of correlating it to SM's devices? or are all just waiting for it to be handed to you on a silver platter? i thought there would be some discussion about it thus far but since there have been no pm's to me or posts on it, apparently no one is looking at it. wow, seems to me that a lot of the hard work was just done for you, but it's not getting through i guess. i'm not asking you to work with me or help me, i'm wondering if anyone is alive out there and can see any value in what was presented. if it's trash then you can say so.

Mannix? any comment?

I replied back a few pages in this thread. Maybe you missed it:

http://www.overunity.com/index.php/topic,4297.msg124676.html#msg124676

Most, if not all, of what you wrote has been brought up before. It's all rather irrelevent unless you wind some coils and the only ones I see doing that are Peterae and Spider. The hard work is not in writing up how you think something works. The hard work is in showing how it works, and I recall you repeatedly asking for this very thing.

Now is a good time to "crap or get off the pot" with this thread and either build the device or leave it to the builders, Peterae and Spider.

the ball is in your court, Poynt99

poynt99 · « **Reply #514 on:** September 17, 2008, 02:40:37 AM »

ic, well that explains a lot.

it's interesting how it's usually only those that feel they are elite somehow, and yet have produced nil results themselves that pipe up.

there are those that do appreciate the work that's gone into the document. not all are so negative, short-sighted, and knee-jerkish in their reactions. some may even be those that receive your kingly praise.

the thread's all yours grumpy

Grumpy · « **Reply #515 on:** September 17, 2008, 03:06:31 AM »

Quote from: poynt99 on September 17, 2008, 02:40:37 AM

ic, well that explains a lot.

it's interesting how it's usually only those that feel they are elite somehow, and yet have produced nil results themselves that pipe up.

there are those that do appreciate the work that's gone into the document. not all are so negative, short-sighted, and knee-jerkish in their reactions. some may even be those that receive your kingly praise.

the thread's all yours grumpy

You missed my poynt. I was trying to coax you into building the device rather than discussing how it works.

Nil results? I've had and posted many results - most dispelling the myths surrounding radiant electricity - such as the "green arc". I also showed that a compass will align to a static electric field as well as a magnetic field.

I have no results with this device because I'm not trying to build it. Maybe I should.

Spherics handed to this forum on a "silver platter" and the response has been rather "ungrateful" - with the exception of a couple of people building.

Let's see now. Four coils alike, yada yada, pulse three by phase and fourth with each of the three. Only 300v? NMR reference puts you in the MHZ range...doopty do...

So you could probably use something like a ring counter or Johnson counter, run the top coil off the clock and the rest off the counter. Use counter output to trigger avalanche mode transistors or mosfets with delay line to set duration of the pulse. Find Earl's ratrace controller in the Earl's Corner thread - this circuit has adjustment of the pulses - delay and width. Google the avalanche stuff. Google the hv power supply.

Anyone see why this approach will not work?

Grumpy · « **Reply #516 on:** September 17, 2008, 05:50:01 AM »

Link to Earl's Corner:

http://www.overunity.com/index.php/topic,2996.msg43797.html#msg43797

He has many ideas for pulse generation in this thread - time to try them.

(Of course a PIC is an alternative to logic IC's.)

otto · « **Reply #517 on:** September 17, 2008, 06:24:06 AM »

Hello all,

@Marco

not now. Later.

Otto

Mannix · « **Reply #518 on:** September 17, 2008, 07:23:56 AM »

Quote from: Grumpy on September 17, 2008, 05:50:01 AM

Link to Earl's Corner:

http://www.overunity.com/index.php/topic,2996.msg43797.html#msg43797

He has many ideas for pulse generation in this thread - time to try them.

(Of course a PIC is an alternative to logic IC's.)

Grumpy,
That thread is off limits to most people here

Otto good work! ..I hope that you can make it clear enough for others to follow

otto · « **Reply #519 on:** September 17, 2008, 08:37:03 AM »

Hello all,

@Mannix

thanks. I learned here that photos, videos, pdfs are a must. No problem.

As Im not jet on the "end point" of my work it will take a time to finish my work. I dont care how long it will take but this "journey" is the best I ever made!!!

Otto

khabe · « **Reply #520 on:** September 17, 2008, 01:54:02 PM »

This kind of OverUnities I do believe,
Very promising heading

Where to find out what title described - Complete information on working SM style device

Did read several times - not even uncomplete information found,
Closer speaking, between us - found nothing $:-\$
Seems classified information, fully encrypted ,
Somewhere non-encrypted version exists

Best regards,
khabe

Grumpy · « **Reply #521 on:** September 17, 2008, 03:05:09 PM »

Quote from: Mannix on September 17, 2008, 07:23:56 AM

Grumpy,
That thread is off limits to most people here

Then go here:

http://www.overunity.com/index.php/topic,4297.msg83736.html#msg83736

and here:

http://www.overunity.com/index.php/topic,4297.msg83397.html#msg83397

and here:

http://www.overunity.com/index.php/topic,2582.msg36504.html#msg36504

and here:

http://www.overunity.com/index.php/topic,2582.msg38506.html#msg38506

Same as Earl says except you are triggering a device in avalanche mode rather than turning it on and off.

Really doesn't matter though, does it? One in a million will actually try it. Ten in a billion will actually stay with it long enough to make it work. The rest will stay behind.

I have 164's, 74's, etc. Need to finish soldering my power supply and will wind the coils end of this week.

I'll post some avalanche stuff later today.

giantkiller · « **Reply #522 on:** September 17, 2008, 05:06:53 PM »

Quote from: bolt on March 18, 2008, 12:29:37 AM

Earl the use of iron NMR seems important. Our visitor explains the reasons why we are going for iron and not copper, silver or gold. Only iron interacts with the ether by providing us with magnetic field. The others don't and he also explains for good reason there is NO iron in the tpu. Basically we are simulating a chunk of iron revolving at high frequencies by emulation that the coil is not a coil at all but we are producing NMR of iron.

Can you see where this is heading if you emulate iron then spin it and wrap wire around it you have a generator!

"The frequency should be a harmonic of the NMR of iron. Do not use iron anywhere in your device this will only cause huge eddy current problems. Iron is magnetic because of the geometry and spacing of its atoms (stationary waves remember) which interact with the ether flow in a resonant fashion despite what you may already believe! The NMR is directly linked to this geometric spacing and hence to the resonant frequency of the ether."

Yes makes perfect sense! The TPU is replicating a spinning iron atom. We take the pure definition of a iron core spinning in 3D space and reconstruct the effect electrically. The ether then believes we have a bit of iron spinning at high speed and will provide the same effects.

This points to the spinning magnetic field.
The 164 points to driving that.
Searl, Hamel, TTBrown, SM, Deyo, Hubbard, Coler, Spherics have these devices. They all spin by different means.
Leedskalnin and Keely both levitated very heavy objects by wrapping a copper wire around the target.

If anyone wants the answers then here ya go. Take this process, and what Grumpy posted, and what Earl posted. Ain't that complicated.

There are alot of people here that I respect in deep reverence. I have been taught by a willingness to learn. Good advice for any of the newbies coming on board.

Or how about this take.
After 2 years of reading, posting, building, testing and jumping around with glee the information here is what I have constantly seen arise in any of the designs. They were before any of us.

--giantkiller. Peace.

sparks · « **Reply #523 on:** September 17, 2008, 05:42:48 PM »

Basically massless charge carriers creating charged space resonance and a massless electric current with all the magnetic field goodies. This energy coerced from intrinsic mass energy or energy storage units. HMMMM!

giantkiller · « **Reply #524 on:** September 17, 2008, 05:48:18 PM »

http://www.overunity.com/index.php/topic,4297.msg83397.html#msg83397
And all the links including viewing the html source is very relevant.

I gather from Keely it is the space between the atomic components and between the molecules or Dynaspheric energy that we coerce to move in ways that return greater energy. Like smacking a hornets nest.

We work or align the sub-atomic components to attract or repell the molecules using the compression or expansion between the molecules. The Dynaspheric action is the extra effect. Normally the atoms don't move which gives a static piece of matter. Alter the covalent bonding or shake the lattice and you can disintegrate quartz to get the gold. Or like Bolt posted 'Spin to simulate an iron molecule' and the local magnetic field will look invisible to the earth field. Tweek that just right and levitate.

--giantkiller. I liked to buy a P.H.D., please.

News:

User Menu

Author Topic: Complete information on working SM style device. (Read 364065 times)

poynt99

Re: Complete information on working SM style device.

turbo

Re: Complete information on working SM style device.

poynt99

Re: Complete information on working SM style device.

Grumpy

Re: Complete information on working SM style device.

poynt99

Re: Complete information on working SM style device.

Grumpy

Re: Complete information on working SM style device.

Grumpy

Re: Complete information on working SM style device.

otto

Re: Complete information on working SM style device.

Mannix

Re: Complete information on working SM style device.

otto

Re: Complete information on working SM style device.

khabe

Re: Complete information on working SM style device.

Grumpy

Re: Complete information on working SM style device.

giantkiller

Re: Complete information on working SM style device.

sparks

Re: Complete information on working SM style device.

giantkiller

Re: Complete information on working SM style device.