Free Energy | searching for free energy and discussing free energy

Would you mind making a drawing of this circuit that is on your latest video?

I think there is no rectifier in this latest video?? I just want to be sure I understand what you did.

Thank you

jeanna

Hi jeanna,

here is the circuit you chose the transformer step up you like, you don't need a toroid!.. It works well with a 12v wall plug power supply, just crack it open and take out the rectifier (electronics) and use the 12v side as your input and the 120v side as output for the bulb or what ever you want as load.

No rectifier. It does not get any simpler than this.

Basically what this shows is that one magnet and a small transformer can do what an inverter does

Have fun.

Luc

Hi Luc, well done,
now try a 2nd Neo magnet oscillator inside secondary circuit, where the bulb is.
When you get both to oscillate you even have much lower power input from the
12 Volts source.

Good luck.

Regards, Stefan.

Thanks for looking and posting Stefan. I order to re-pulse the voltage on the secondary side (where bulb is) I would need to rectify it back to DC since AC will not pulse on the neo magnet and then put it through a 2nd transformer to raise the voltage once again.

Is that what you are thinking?

Luc

Thanks for looking and posting Stefan. I order to re-pulse the voltage on the secondary side (where bulb is) I would need to rectify it back to DC since AC will not pulse on the neo magnet and then put it through a 2nd transformer to raise the voltage once again.

Is that what you are thinking?

Luc

No, just chop the AC up on the secondary site via such a neomagnet-mechanical
switch or better graphite versus magnet switch..
as you did with the DC on the primary side.

This will reduce the Lenz law and still reduce the used power
on the primary side.

Since it is AC, it will suck onto the magnet during half the cycle and push away from the magnet on the the other half of the cycle.

Dave L

Exactly ... I tried it a while back and no self pulsing.

I have a new improvement and I will do a video and post maybe tomorrow or the next day. For those who are testing this effect you can get a much better results by using a carbon graphite rod (from zinc battery) instead of the copper wire, it will not burn and the plasma is way down.

What you need to change though is the magnet needs to be on the coil so it is free to vibrate with the feed back or inter play of the EMF and your coil needs to be of high dc resistance (90 ohms or more) also an air core. I cut open a microwave transformer and pulled out the secondary and that is what I'm using. You connect the negative directly to one side of the coil and the positive to your alligator clip to the carbon rod and pulse the neo which is connected to the other side of the coil. Connect your bulb to both sides of the same coil. You will have to play around with it until you find the right position and correct side for the carbon to pulse the magnet. Once you have it right there should only be a very small blue spark. I'm quite sure now this is a 100% efficient step up transformer.

I attached also a scope shot.

Stay tuned for more.

Luc

Just did an experiment.

I am using the +12 volts of a PC power supply to fire off an automotive HV coil. Approx 15 Kv I would guess......

Dave L

These experiments are all very interesting, and they remind me of Tesla and Coler.
That the effect seems weakened by having the arc go from copper to copper even in the presence of a magnetic field is very encouraging that something very interesting is going on here besides just swifter extinguishing of an arc.

Indeed it seems that this is the same effect that is being chased as a nuclear effect with carbon and thorium rods (VSG), of course that never made sense anyway.

This all seems rather predictable from the aetheric point of view.

The following principles should be considered.

Electric current and or electric fields parallel to magnetic fields. (not at right angles as is 'normal')
Use of carbon or bismuth or other diamagnetic materials for one electrode and magnets for the other. (or steel and add an external magnet)
Shorted and 90 degree coil forms such as the caduceus coil may enhance the effect. (the classic parallel non inductive caduceus is shorted)

If we assume that this effect and the rather similar VSG effects (including Bill Alek's carbon-thorium results without a magnetic field) are related as well as other similar spark gap effects then it isn't really about magnets alone, it is about the aether effecting the results.

Dave, a video or a few diagrams to clarify some of the above would be appreciated.
It is rather tempting and possibly even easy to do a semi replication of Han's Coler's type setup with current flowing through magnets but not necessarily being struck on them, after all with the evidence present in Hydrogen Tap's video it seems that the magnet and the arc need not be in the same location provided current passes through the magnet.

Right now I am too busy with the Thane's discovery but this is very interesting!

I do plan on doing experiments here and you sure couldn't get lower requirements!

excellent work and findings Luc

do you think you might be able to rig it up in a fixture so it runs by itself without you holding the wire/carbon rod?

Hi poynt99 and thanks for looking.

Yes I do think I'll come up with some kind of contraption ,...also I found that the coper wire works very well on this setup also. Seems like a high resistance air core cuts down the plasma that burns the magnet and wire.

Stay tuned for updates.

Luc

Hi all,

here is a video I made of the ideal Dave (user: libra-spirit) had of pulsing an ignition coil (instead of a transformer) by using the neo magnet circuit I posted. Also note that in the video I am using only 12 volts DC from a battery.

Enjoy and play safe if you try this: http://www.youtube.com/watch?v=t_3OkDvmp_Y

Thanks for sharing Dave.

Luc

 Hi gotoluc, I watched your last video and I was wondering if that concept would be a good way for splitting hydrogen from water? I think it would make for a good experiment.