Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: The First TPU  (Read 18900 times)

EMdevices

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 1146
The First TPU
« on: January 04, 2008, 11:41:48 PM »
The first Toroidal Power Unit  [ TPU ]

by Steven Mark


http://video.google.com/videoplay?docid=-8435800732540412467&q=Steven+Marks&total=7656&start=0&num=10&so=0&type=search&plindex=8


[Here's a transcript of this first video.  If anybody has a better video then what's available on the internet please let us know. -EMdevices]


most devices are capable of generating electricity... and ...they're conversion devices, they?re not free energy devices ...they're ... they're not ?devices that can't be properly demonstrated.

these devices... take energy from the natural magnetic field of the earth, which has an inherent frequency... we basically tune into that...and ?take the energy that is readily available ....from the earth's magnetic field ? and produce electricity from it..

[takes out a voltage meter]

this is a voltage meter..  I'll use this voltmeter to demonstrate the power output of one of my devices....

[takes small TPU from box and places it on top of the table equipment]

this is the smallest device ....that I ever made.. one of the first devices ... this is put together with bailing wire... it is very very small...you can tell by the size of my hand and fingers that this device is very small... it doesn't contain any batteries capable of generating the amount of electricity that you're going to be witnessing here..

now I'm going to turn the device on ?through the use of this single measure... these wires travel directly to this meter right here......

[mumbling to himself while hooking up wires]....

ok...[clicks buttons on meter].....[starts lifting small magnet]...ok ... now ?I'm going to take this magnet  ? place this magnet right here

[places magnet on small toroid]

..the device is now putting out a constant ... consistent ?.62 volts ... 61.8 ? it will fluctuate back and forth ?.voltage wise ...

[removes magnet]

if you remove the magnet ?from the system ... the voltage automatically goes ...starts going down? there is a frequency pattern set up in here  ...and it takes a while to wind down similar to a jet turbine

[puts the magnet back on the toroid]

take the magnet ...put the magnet back within the device and immediately the voltage goes back up again ?61.6 ? 61.8

[lifts device in hands]

if you take this device ?and hold it in your hands.. it prod...it it vibrates ever so slightly right around 7.3 cycles per second ...and ...generates a little bit of heat ...during this conversion process...

[He turns device upside down]

if you take this device ?and for some unknown reason ...turn it upside down... immediately it stops producing electricity ?down now to 13 volts 12 volts ?it stops producing electricity

[He flips device back in normal position]

 ?.reverse it again ?.and immediately ? back up to 61.6 volts ...  I have no explanation for why that is

this is the smallest device that I have come up with so far... this device will produce 61.5 volts ...literally forever...the amount of current that it produces very.. varies ... at the present time it's 61.5 volts it puts out about ...25 watts ....the more current you draw from the device the more heat it generates....

now I'm going to show you a larger device I have ? also of similar construction...
very very cheaply put together ?there?s no mass circuitry involved with any of this stuff .... it's just the knowledge of the coils and how they interact with each other....

[talking to cameramen:  ?you can shut it off now and will go the other device?]
« Last Edit: January 06, 2008, 12:16:57 AM by EMdevices »

EMdevices

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 1146
Re: The First TPU
« Reply #1 on: January 04, 2008, 11:48:23 PM »
Seeing what Steven said about his first TPU is quite amazing.

1)  Takes energy from the MAGNETIC field of the earth.   Why not mention ELECTRIC field?

2)  The device TUNES to the right frequency of this earth magnetic field.  So it's a tuned device.

3)   Uses "bailing" wire, which to me says it's IRON wire

4)   Uses no "mass  circuitry" just knowledge of the coils and how they interact with each other.  (note "with each other", why not with the magnetic field of the earth? hmmm?)

5)  The device depends on orientation,  so I believe it when he says it's tuned to the magnetic field of the earth. It's like an antenna, and antennas depend on orientation.

6)  Takes a magnet to start it

7)   He speaks of a jet turbine effect, he seems to understand it involves a "lag" or delay, maybe even rotation.

etc..

EMdevices
« Last Edit: March 21, 2008, 04:37:41 PM by EMdevices »

HopeForHumanity

  • Sr. Member
  • ****
  • Posts: 295
Re: The First TPU
« Reply #2 on: January 05, 2008, 02:37:14 AM »
I just made a connection. I haven't recalled Steven ever saying MY device. Only this device, the device, a device that I have. What if, using these habits of refering to the device, he isn't being honest to who made it. What if there is a secret engineer that we don't know about! Maybe he is just being made to say stuff. This would be the reason he couldn't give out anymore information. This would be the reason he wouldn't want to contact us. GUILT! It's all regret about claiming to be the inventor! With this situation, the government could have assassinated the real maker. We have been running in circles trying to figure out why this guy would just give up on a device that would change the world forever. I still think money wasn't the reason he gave up. He could have made even more money on selling the devices in his own buisness. Yes, this is a very large hypothesis, but think about it. There is no way he would just shut up about it.

Grumpy

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 2247
Re: The First TPU
« Reply #3 on: January 05, 2008, 04:57:23 AM »
Compare this to the last video where he doesn't say it is tuned to the earth's mag field, and where he states that the energy comes form within the device itself.

Also, he turns on only two frequencies for the large ring.

...and they all have a similar thickness to the ring itself.

He's got the dragon in a "knot"...

amigo

  • Hero Member
  • *****
  • Posts: 545
Re: The First TPU
« Reply #4 on: January 05, 2008, 05:52:19 AM »
I have been seeing these posts about TPU all over the forums here, but most of the time would ignore them because it didn't spark my interest. In any case I have watched the videos EMdevices referred to on Google Video to see what all the fuss is about and learn more about TPU and this "mysterious" Steven Mark fellow.

Sure thing the videos are of poor quality and to make a digression a bit, isn't that always the case? Just like the UFO videos, where things are either too far, too blurry or just bright lights in the sky. Well these TPU videos are right up there with the UFO ones, and there are lights in them, too. What's portrayed might be authentic and it does look impressive but then again isn't that always the case or the intent of the presenters?

Not passing a judgment here, I'm really not, but the only thing that stuck in my mind after watching the videos was that he said the unit uses Earth's magnetic field to draw it's power, and right there I felt it was a dead-end. If I recall correctly our scientists tell us that the Earth's magnetic field had reversed itself many times in the past and it is bound to happen again in the future. It is something, they say, that happens naturally and in cycles. Common sense tells me that this one, or any kind of device relying on a connection to the Earth's magnetic field is bound to failure and as such should be deemed unreliable.

Yes, it could be one of many backup alternative energy sources, if it can be reproduced and harnessed by everyone, yet I am not sure if anyone has thought about the Earth's magnetic field failure before since I did not read all the posts (way too many). I'm kind of a guy who worries that one morning we'll wake up and the gravity would reverse itself and everyone would fly up into the sky and out into the open space. Nothing is ever set in stone and taking things for granted might prove to be detrimental at the end...

EMdevices

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 1146
Re: The First TPU
« Reply #5 on: January 06, 2008, 12:28:39 AM »
good points guys,

we should just state for completion that Steven Mark, abbreviated as SM on this forum,  has many other types of devices.

The videos can also be viewed at the same websites, and sadly they are of a lower quality, however, it is evident that they reveal something quite extraordinary, if indeed it is.

Like Grumpy has mentioned,  in the other videos, he seems to say something different, but again, he is talking about a different device altogether.   

Are these devices related?    It stands to reason that they should be if invented by the same guy, they certainly look about the same, meaning round, but then again the function can be somewhat different.

I want to explore more the idea that these devices tap the MAGNETIC field.

It is obvious that the TPU is composed of two loops of twisted wire, this makes sense.  They seem to be loop antennas and they're designed to pick up MAGNETIC fields, not electric.

But the idea of an INHERENT FREQUENCY, can be somewhat confusing.  On the one hand, there are electromagnetic fields of different frequencies everywhere around us.  But when speaking of the magnetic field of the EARTH, we think of that as STATIC, not changing (perhaps very slow over year as we are told or with major geological events)   So what exactly does he mean?  Is he using the term loosely to just mean magnetic fields? with the reference to "earth" being made just because we obviously live on earth? 

It' possible, but one thing is clear, he mentioned MAGNETIC FIELDS, and the configuration of the device matches, since he is using LOOPS of wire.

EM

Chad

  • Full Member
  • ***
  • Posts: 128
Re: The First TPU
« Reply #6 on: January 06, 2008, 04:17:47 AM »
The thing that has me thinking is why doesnt the TPU work upside down?....i mean whats within the TPU that defines its top and bottom if its merely coiled wire?.

EMdevices

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 1146
Re: The First TPU
« Reply #7 on: January 06, 2008, 05:10:59 AM »
yes Chad, this phenomena is very interesting. I believe it shows that the device operates like some sort of an antenna, since only antennas depend on ORIENTATION.

Everything SM has told us through Lindsay also makes sense (about the 3 signals adding, etc..) but this simple first device of his, seems to not follow those rules.  Maybe SM learned a lot of lessons from this simple device, and perhaps learned what the real source of energy is, so he could extrapolate and make the larger TPU.

I really want to understand this little TPU, and if we had a better video we could gain more insight into it.   

Whoever posted those initial videos at Google and other places, if you read this, please make a better copy of the video and post it here.  It will be of tremendous help.

EMdevices


tosky

  • Jr. Member
  • **
  • Posts: 99
Re: The First TPU
« Reply #8 on: January 06, 2008, 07:55:26 AM »
@EMdevices & Chad
Nothing to do with orientation. Only gravity or energy from the sky defines top and bottom.

leeroyjenkinsii

  • Jr. Member
  • **
  • Posts: 81
Re: The First TPU
« Reply #9 on: January 06, 2008, 08:20:03 AM »
OK guys...how viable is this:

http://youtube.com/watch?v=y9wktSQdyaE

Chad

  • Full Member
  • ***
  • Posts: 128
Re: The First TPU
« Reply #10 on: January 06, 2008, 10:26:01 AM »
@Tosky

well "Maybe" if the device is feeding from the earths magnetic field and electrons are traveling around the collector coils in the "correct" direction for the device to operate, so when the device is flipped over the electrons will be traveling in the opposite direction to draw the magnetic field... so the TPU will begin to stall, also if you notice in the video when he flips the device over the magnet he has attached lets say he has it oreientated with the earths magnetic field.. so this also is on the opposite side to wich it started reversisng the poles in relation to the earths magnetic field.


turbo

  • Guest
Re: The First TPU
« Reply #11 on: January 06, 2008, 12:12:34 PM »
Hey EM :)

thanks 4 the writeup..
are you going to analyse the other vid's too? :)

M.

tosky

  • Jr. Member
  • **
  • Posts: 99
Re: The First TPU
« Reply #12 on: January 06, 2008, 06:25:25 PM »
@Chad
The tornados always screw to the earth not to the sky. It is because gravity. If a vortex is needed and happening in the TPU then electron as elementary particle should also screw to the earth.  But I don't know whether tornado rotates only clockwise or both direction. If only clockwise there may be some physics related to the TPU.

wattsup

  • Hero Member
  • *****
  • Posts: 2606
    • Spin Conveyance Theory - For a New Perspective...
Re: The First TPU
« Reply #13 on: January 06, 2008, 07:10:10 PM »
@EM

Good work on the transcript.

Notice in the presentation, he put the magnet on first. Then he fiddle around on the meter pushing buttons. Why did he spend so much time on pushing buttons on the meter. This should have been set to DC volts before since he new he was doing the demo and he must have practiced the demo a few times before video tapping it. This gave the time for the TPU to increase in voltage before the meter was on and showed 61.5 volts. Also by doing this, we could not see any starting voltage readout, like maybe 12 volts or 9 volts.

Come to think of it, he always starts the units before he looks at the voltage. never see the voltage with the unit off. I SM leaves nothing to chance, there is a reason for this.

1) Notice when he says the voltage is "down now to 13 volts 12 volts it stops producing electricity". We should look at this sequence VERY carefully and count the time it took for the voltage to drop. I tried looking at the meter readout but the video is again the craps. He had enough time to say 13 - 12 volts. It can give the impression that the voltage never dropped below this level since he said at that point it stops producing.

2) 61.5 volts - 25 watts = 0.406504065040650..... amps.
A little less then half an amp.

3) Dead Give Away when he says....
"it doesn't contain any batteries capable of generating the amount of electricity that you're going to be witnessing here..". This is another way of saying that there are batteries to run the circuit, but never enough to run the whole output you are witnessing.

4) In general the first TPU demo was not long enough to prove any OU.

5) Again. Circuit is inside the ring. Always a constant.

6) Son of a gun - the magnet position...............
You can see near the toroid there are two bailing wires coming out in front of the toroid like a left and right magnet stand on which he put the magnet. The magnet is actually about 1 inch away from the toroid. I have prepared some drawings below to explain what this is being used for physically.

One magnet field is "probably" going around a top bailing wire and the other field the bottom bailing wire. Both wires are around the outer rings and this is why he is using a silicone type of adhesive to keep the wire in place. I don't know if the discs are metal or not but would guess not.

I have tried many tests with bailing wire with a magnet and or a coil and the field goes all the way around.

Grumpy

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 2247
Re: The First TPU
« Reply #14 on: January 06, 2008, 10:32:08 PM »
nah...

« Last Edit: January 10, 2008, 05:25:03 PM by Grumpy »