Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Muller Dynamo  (Read 4321935 times)

PiCéd

  • Full Member
  • ***
  • Posts: 172
Re: Muller Dynamo
« Reply #6165 on: February 18, 2014, 10:54:13 PM »
This has nothing to do with the topic but it is interesting.
Well, I done some tests and it apear that a DC motor and a capacitance acts like two batteries in parallel, in fact the more you turn the motor to charging sens the more easier you can charge the cap.
For exemple, I have try with a monopolare chemical capacitance of 0,0047 farad, it apear that the turn of the motor is as easy (maybe more) than if the motor turn with no short_circuit and the cap is perfectly charged, aproximately to the same voltage than the rotation of the motor (1.5 or 1.9 volt). It work well if you remove faster the cap befor the motor begin to move more slowely or if you have a diode blocking the charge returning to the motor.
I don't think we can do that with an alternator.
With my other tests, first I just connect a battery of 1.5 volt to each side of my motor, it turn on one sens, then if you replace the battery by a multimeter on each side of the motor and turn to the same sens like the prevous test (with the battery) with you hand, you can see that your motor produce the same charge in the same side than the battery, the motor must only be DC.
It is two tests realy easy to done.

crazycut06

  • Sr. Member
  • ****
  • Posts: 297
Re: Muller Dynamo
« Reply #6166 on: February 19, 2014, 01:06:55 AM »
He's holding back the potential of the toroid, like he said in the video, he removed the coil shorting circuit as not to shock the user, maybe for safety reasons, he doesn't want his machine to be a shocker!  :o Haha.. But for advance user it will be favorable, in battery charging, imagine a more powerful bedini charger many times more bemf! As an intro for his machine not bad, no drama at all  ;D ...

Magluvin

  • Hero Member
  • *****
  • Posts: 5884
Re: Muller Dynamo
« Reply #6167 on: March 04, 2014, 03:19:07 AM »
Im posting this here because some parts are related, such as speed up under load.

It was presented at Peswiki. A few guy from the Ukraine worked this out, and seems good. Very interesting demo. ;)

http://www.youtube.com/watch?v=3c0X6nSsj7w



I had tried something similar with an air core, as a motor, not a gen, and had some weird results.

Mags

crazycut06

  • Sr. Member
  • ****
  • Posts: 297
Re: Muller Dynamo
« Reply #6168 on: March 04, 2014, 11:57:05 AM »
Im posting this here because some parts are related, such as speed up under load.

It was presented at Peswiki. A few guy from the Ukraine worked this out, and seems good. Very interesting demo. ;)

http://www.youtube.com/watch?v=3c0X6nSsj7w


I had tried something similar with an air core, as a motor, not a gen, and had some weird results.

Mags


Well i think this is not new, i've  seen an old video before with this kind of setup, only his core are shaped C but with same effect, also others experimenting with ed leedskalnin perpetual motion holder, U core same effect also, speed under load, might be related with the T2 gen. Worth experimenting with.

gyulasun

  • Hero Member
  • *****
  • Posts: 4117
Re: Muller Dynamo
« Reply #6169 on: March 04, 2014, 12:48:06 PM »
Hi Folks,

Recently a new member Miroslav13 started a new thread on that setup at energetic forum:
http://www.energeticforum.com/energetic-science-ministries/16629-motor-generator.html#post251601

He is willing to answer any technical questions... 

Gyula

crazycut06

  • Sr. Member
  • ****
  • Posts: 297
Re: Muller Dynamo
« Reply #6170 on: March 05, 2014, 01:00:33 AM »
Hi Folks,

Recently a new member Miroslav13 started a new thread on that setup at energetic forum:
http://www.energeticforum.com/energetic-science-ministries/16629-motor-generator.html#post251601

He is willing to answer any technical questions... 

Gyula


He also posted it here, (motor generator) but no one is interested. :-[

captainfletcher

  • Newbie
  • *
  • Posts: 28
Re: Muller Dynamo
« Reply #6171 on: April 17, 2014, 12:41:32 PM »
Hello,
From your experience, what can be the value of M henrys self with 300 turns of wire Dia approximately 0.7 m / m in several layers on a ferrite core 5 m / m in diameter.
I did not really want to wind 16 small coils 300 turns each one.
There are indeed all coils made ​​with a lot of available values.
Regards.

Scorch

  • Sr. Member
  • ****
  • Posts: 264
    • Scorch's Private Contractor Site
Re: Muller Dynamo
« Reply #6172 on: April 18, 2014, 02:30:17 AM »
Some of you may be interested in this.
Remember the "WITTS ministries" video featuring a self powered motor/generator powering a bank of lights?
See:
https://www.youtube.com/watch?v=P-a8QAeCoNU

Apparently they stopped charging for the plans which have been released as 'open source' including drawings, images, and schematics.
See:
http://pesn.com/2014/03/26/9602463_Quantum-Energy-Generator_QEG_Open-Sourced/

Looks really interesting but could be pretty challenging to fabricate the laminated core plates then winding 3,000+ turns around a toroid. . .

Wish somebody would mass produce the core unit already wound or, at least, the basic parts.

}:>

captainfletcher

  • Newbie
  • *
  • Posts: 28
Re: Muller Dynamo
« Reply #6173 on: May 02, 2014, 11:18:57 AM »

rc3po

  • Newbie
  • *
  • Posts: 27
Re: Muller Dynamo
« Reply #6174 on: May 02, 2014, 04:14:05 PM »
Hello,
Do you know PMMG4HYBRID ?
https://www.youtube.com/watch?v=0dkiHUasERA&list=TLvLB65Thz50Sh1xT4MkaaVvVPTaWVqEEf
https://www.youtube.com/watch?v=r5Ln5hogw6Q&list=TLvLB65Thz50Sh1xT4MkaaVvVPTaWVqEEf
Back EMF is the base of all system like wheels RomeroUK.
Thanks man, I like that guy!! Great videos and good presentation. I wish I could afford to build stuff like he can. :)

captainfletcher

  • Newbie
  • *
  • Posts: 28
Re: Muller Dynamo
« Reply #6175 on: May 04, 2014, 10:19:34 AM »
Hello
I would like to submit my problem:
I began to replicate a wheel as shown PMMG4HYBRID .
Therefore the wheel 8 is in place with magnets 2 cm in diameter, the wheel diameter is 25 cm .
At first I placed a single coil , it weighs 450 grams with 0.5 mm wire and I wanted to do a test.
By turning the wheel with a screwdriver at about 800 revolutions per minute , there is 4.5 volts vacuum across the coil.
There is no core in the coil to avoid cogging .
If I put two coils in series there should be 9 volts, this is not enough. What should I do?
For the purchase of copper wire is expensive especially for a possible failure.
What is the architecture of this system is the best for a good performance?
The answer is important because of PMMG4HYBRID my future project will be to build a machine of 10 Kilowatts for home .
Our friend had a lot of thinking on all these systems and it would be a shame to reinvent the wheel is the case to say it.
PMMG4HYBRID thank you for helping us , all comments are welcome.
Captainfletcher .
Sorry for my English.

Scorch

  • Sr. Member
  • ****
  • Posts: 264
    • Scorch's Private Contractor Site
Re: Muller Dynamo
« Reply #6176 on: May 04, 2014, 06:12:27 PM »
It's my understanding his system is still in development and the current, "T2", model is still being improved.
My impression is that these systems will be more efficient operating at high voltage but he may be a little hesitant to release a high voltage version to the public as a mere experimental kit.
There are certainly safety issues to take into consideration with these things before just selling them to any Joe on the street.

I would like to convert my Q3 to a T2 so I am just waiting to see what the next generation of the T2 might evolve into.
So my Q3 project is on standby while waiting for these future developments and other possibilities such as the QEG.

http://hopegirl2012.wordpress.com/2014/03/25/qeg-open-sourced/
http://pesn.com/2014/03/26/9602463_Quantum-Energy-Generator_QEG_Open-Sourced/

Kindest regards;
}:>

Hello
I would like to submit my problem:
I began to replicate a wheel as shown PMMG4HYBRID .
Therefore the wheel 8 is in place with magnets 2 cm in diameter, the wheel diameter is 25 cm .
At first I placed a single coil , it weighs 450 grams with 0.5 mm wire and I wanted to do a test.
By turning the wheel with a screwdriver at about 800 revolutions per minute , there is 4.5 volts vacuum across the coil.
There is no core in the coil to avoid cogging .
If I put two coils in series there should be 9 volts, this is not enough. What should I do?
For the purchase of copper wire is expensive especially for a possible failure.
What is the architecture of this system is the best for a good performance?
The answer is important because of PMMG4HYBRID my future project will be to build a machine of 10 Kilowatts for home .
Our friend had a lot of thinking on all these systems and it would be a shame to reinvent the wheel is the case to say it.
PMMG4HYBRID thank you for helping us , all comments are welcome.
Captainfletcher .
Sorry for my English.

captainfletcher

  • Newbie
  • *
  • Posts: 28
Re: Muller Dynamo
« Reply #6177 on: May 05, 2014, 11:07:05 AM »
Hello,
Thank you very much for your response Scorch.
I continue my investigations generators Coreless and browsing the web, I came across the bike engines and wind turbine engines.
Some motors or generators are much like generators or PMMG4HYBRID Muller.
There is no core so no cogging and performance are very good from the PDF.
The architecture is quite different, there is a coil but two magnets on each side of the coil.
So the mechanical assembly is different. I am researching to find a small wind engine cheap to change.
axial flow type coreless motor
What do you think?
What is amazing is the power delivery at low revs.
There are also less copper so the generator will be cheaper too.
All comments are welcome.

Scorch

  • Sr. Member
  • ****
  • Posts: 264
    • Scorch's Private Contractor Site
Re: Muller Dynamo
« Reply #6178 on: May 05, 2014, 04:11:30 PM »
I think there are many designs out there and I have no idea which is best and probably depends on application.
Are you aware there is a huge, 2,600 page, book called "Practical Guide To Free Energy Systems"?
This book is updated pretty regularly, will probably keep you busy for quite some time, and is available for viewing or download here-
www.free-energy-info.com

It's my belief there is something like 5,000 known patents, for alternative energy devices and systems, that are not available for public scrutiny under guise of 'national security'.
Any system that threatens 'our oil interests' (including profit margins) is a threat to national security which will be defended to the death and many have either died, been discredited, or financially assassinated for attempting to bring such systems to the public.

As long as people silently consent and not object to such laws, defending profit margins of energy companies, they will remain. . .

}:>



Hello,
Thank you very much for your response Scorch.
I continue my investigations generators Coreless and browsing the web, I came across the bike engines and wind turbine engines.
Some motors or generators are much like generators or PMMG4HYBRID Muller.
There is no core so no cogging and performance are very good from the PDF.
The architecture is quite different, there is a coil but two magnets on each side of the coil.
So the mechanical assembly is different. I am researching to find a small wind engine cheap to change.
axial flow type coreless motor
What do you think?
What is amazing is the power delivery at low revs.
There are also less copper so the generator will be cheaper too.
All comments are welcome.

fabioharry

  • Newbie
  • *
  • Posts: 5
Re: Muller Dynamo
« Reply #6179 on: May 05, 2014, 04:32:55 PM »
Good morning!

I'm new to the forum, but I've been watching this and other threads a while ago.

I'm building something like the Q3 Quanta Magnet, but I'm with some doubts about the basic operation of the generator.

1 - How is the push to spin the rotor?
As I understand it one of the coils is transformed into an electromagnet, correct?

2 - The same coil that is shifted toward the electromagnet also captures energy?

3 - If one of the coils is shifted toward the electromagnet it will be different from the others, but the generator to work properly it is necessary that all coils are equal, this thought is correct?

4 - Does anyone have a tip for building this magnet / coil?

I'm racking my brains to unravel these issues.

Sorry my English, because I do not write very well.

Thank you all.