Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Muller Dynamo  (Read 4322234 times)

romerouk

  • Sr. Member
  • ****
  • Posts: 366
Re: Muller Dynamo
« Reply #45 on: May 05, 2011, 09:18:55 PM »
It WORKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS !
I am going to upload the video, is almost 20 minutes of self running.
The skeptics should prepare the arsenal..... :)

penno64

  • Sr. Member
  • ****
  • Posts: 457
Re: Muller Dynamo
« Reply #46 on: May 05, 2011, 09:32:52 PM »
Hi Romero,

CONGRATULATIONS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Kindest Regards, Penno

FreeEnergyInfo

  • Hero Member
  • *****
  • Posts: 501
    • FreeEnergyLT
Re: Muller Dynamo
« Reply #47 on: May 05, 2011, 09:36:43 PM »

gyulasun

  • Hero Member
  • *****
  • Posts: 4117
Re: Muller Dynamo
« Reply #48 on: May 05, 2011, 09:48:50 PM »
It WORKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS !
I am going to upload the video, is almost 20 minutes of self running.
The skeptics should prepare the arsenal..... :)


CONGRATULATIONS!!!!!

Gyula

neptune

  • Hero Member
  • *****
  • Posts: 1127
Re: Muller Dynamo
« Reply #49 on: May 05, 2011, 09:57:47 PM »
@romerouk/ Congratulations , and watch out for the MIBs.Am I dreaming , or is this just what we have been looking for .Fairly simple , open source , looped. get those plans sorted , sit back and count the money . I personally feel that optimisation will eliminate the need for the DC-DC converter. All hail the mighty romerouk!

romerouk

  • Sr. Member
  • ****
  • Posts: 366
Re: Muller Dynamo
« Reply #50 on: May 05, 2011, 10:10:32 PM »
@Gyula
Thank you Gyula for your sugestion with the DC/DC converter .
The one from Maplins is what I used and it worked just fine .
The upload is in progress but is 1.35gb file and it takes some time

gyulasun

  • Hero Member
  • *****
  • Posts: 4117
Re: Muller Dynamo
« Reply #51 on: May 05, 2011, 10:16:53 PM »

Hi Romero,

you are welcome and I am very pleased for your looping success!
Later, when you have some more time, try to place some further load to the 12V output of the converter, just to see how much extra 'reserve' energy is still hidden in the setup.
I do believe that further improvements are possible, like getting rid of the diode bridge and use controlled MOSFETs as rectifiers and so on.

rgds,  Gyula




woopy

  • Hero Member
  • *****
  • Posts: 608
Re: Muller Dynamo
« Reply #52 on: May 05, 2011, 10:20:21 PM »
 ;) :D ;D :D :D ;D ;D ;D ;D ;D ;D ;D

yeepee !!

video video video

thanks for sharing

good luck and take care

Laurent

romerouk

  • Sr. Member
  • ****
  • Posts: 366
Re: Muller Dynamo
« Reply #53 on: May 05, 2011, 10:28:18 PM »
Hi Romero,

you are welcome and I am very pleased for your looping success!
Later, when you have some more time, try to place some further load to the 12V output of the converter, just to see how much extra 'reserve' energy is still hidden in the setup.
I do believe that further improvements are possible, like getting rid of the diode bridge and use controlled MOSFETs as rectifiers and so on.

rgds,  Gyula
At one time durring the test I have added the 20w bulb too and it worked. The voltage dropped a little under 12 volts.You will understand more when u watch the video.Before recording the video I tried with a 20w bulb plus a 5w bulb and that was a bit too much, the voltage dropped to 10.1v .The converter is not that strong too.A better setup with bigger magnets and bigger coils will do better.That is the next step now.

gauschor

  • Hero Member
  • *****
  • Posts: 529
Re: Muller Dynamo
« Reply #54 on: May 05, 2011, 10:29:23 PM »

It WORKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS !

Omg, this will be amazing!! Can't wait for it!

I'm quoting woopy's post to express my feelings:

;) :D ;D :D :D ;D ;D ;D ;D ;D ;D ;D

yeepee !!

video video video


neptune

  • Hero Member
  • *****
  • Posts: 1127
Re: Muller Dynamo
« Reply #55 on: May 05, 2011, 10:30:16 PM »
While we wait for the video , here is a thought  .I assume that all the magnets in the rotor have the same pole facing up . So therefore , am I right in thinking that the output from a given pair of coils is NOT AC , but pulsed DC ? If I am right , we can replace all the bridge rectifiers with single diodes . This would cut losses and improve the voltage of the out put .Can someone tell me if I am right or wrong ? Meanwhile , this is much more exiting [and of more benefit to mankind] than the first man on the moon .

bourne

  • Full Member
  • ***
  • Posts: 201
    • Last of the Summer Wire
Re: Muller Dynamo
« Reply #56 on: May 05, 2011, 10:36:02 PM »
Very well done sir.

As I suspected last night, now after re-reading the thread and seeing your new post...

We are in a 'Drop Everything you are doing and come here' situation.

I will be ordering All the parts required for this replication this weekend.

Thank you Romerouk, I am looking forward to this!

romerouk

  • Sr. Member
  • ****
  • Posts: 366
Re: Muller Dynamo
« Reply #57 on: May 05, 2011, 10:36:39 PM »
While we wait for the video , here is a thought  .I assume that all the magnets in the rotor have the same pole facing up . So therefore , am I right in thinking that the output from a given pair of coils is NOT AC , but pulsed DC ? If I am right , we can replace all the bridge rectifiers with single diodes . This would cut losses and improve the voltage of the out put .Can someone tell me if I am right or wrong ? Meanwhile , this is much more exiting [and of more benefit to mankind] than the first man on the moon .
all magnets are same pole facing up. I have a spare rotor with magnets NSNS but I have never tried it but I will...
I am looking forward to bulid a proper one now.
I think now that we know it works people should try to replicate a bigger size.
Biggest problem I had was to get the rotor made.The core is very important
The picture below shows the core i am looking to use in the next setup.

romerouk

  • Sr. Member
  • ****
  • Posts: 366
Re: Muller Dynamo
« Reply #58 on: May 05, 2011, 10:45:33 PM »

penno64

  • Sr. Member
  • ****
  • Posts: 457
Re: Muller Dynamo
« Reply #59 on: May 05, 2011, 10:51:54 PM »
Romero,

I am STOKED

I can't believe what I'm seeing.

Again, CONGRATULATIONS and THANKYOU so much for sharing.

Kindest Regards, Penno