Free Energy | searching for free energy and discussing free energy

Solid States Devices => solid state devices => Topic started by: Kalki on November 30, 2007, 07:29:08 PM

Title: Auto-Inductive Rectenna via Scroll Waves
Post by: Kalki on November 30, 2007, 07:29:08 PM
The Auto-Inductive Rectenna

Open Letter Regarding the Master Plan of Tesla Motors and State-of-the-Art Free Energy

The Tesla Roadster, while awesome in its own right, is still an incremental and modern version of an old idea. It has made the idea of an electric vehicle practical, but not affordable. The Master Plan of Tesla Motors is to (wait for Li-ion batteries to come down in price to) make variant lines mass marketable. This is a normal route for disruptive technologies dependent on other technologies in more or less the same situation, and in this sense the business plan is sound, they take on a symbiotic relationship.

Unfortunately alternative energy is an innovative hotbed, and, like 100 years ago, we see many inventions springing up now, clamoring for market dominance under the strain of a collapsing predecessor infrastructure. The likelihood of a superior technology and business model attaining dominance before the Master Plan can be fulfilled is high. Memetically Tesla Motors is paving the way, and those in their draft now are looking for a tighter line around the Hydrocarbon Age. The CEO of Tesla Motors is overconfident with his pole position.

.At the Tesla Motors website the CEO states he receives unsolicited free energy proposals a couple times a week. He also states he's aware of the "Black Box" legend. The prior he doesn't bother to read because, "you can't break the laws of physics" and the latter is just a "story". I'm glad to see he went to so much effort. If I was him I'd have the foresight to admit maybe even one solicitation could yield a valuable piece of IP and that if it wasn't pursued it would end up being competition. Seriously, if you're going to name your company "TESLA" Motors it might be prudent to at least know who Nikola was, his intent, and honor him by hiring someone to investigate any and all free energy claims - heck I've been doing that at the expense of others for 10 years now! To not do this would cause Tesla to roll in his grave, ironically if you were to attach some magnets to him and wrap a coil around the coffin.

Well I can only conclude everybody at Tesla Motors is from the, "Space is Empty" camp. They talk of energy density but don't they know about R. Feynman's mug of coffee quote? Free Space has greater energy density than any battery!

EXPEDITING THE MASTER PLAN

If a technology were so perfectly suited to its purpose it can't be improved upon or replaced it is capable of maintaining a monopoly, if not economically then intellectually. I'm pitching my invention now under this assumed business model.

Among the hundreds of energy conversion processes ranging from obvious to speculative or anomalous there are a few that, weighed against all criteria, must be superior. If a solid-state device existed that weighed about 20 lbs, was about the size of a toaster oven, and could convert the energy density of space into electric current proportional to the load in the circuit, it would be safe to say this is among the few superior processes.

This ideal technology, in its most rudimentary form, has been around since Tesla's patent 685,957, it is the original Rectifying Antenna or Rectenna. A Rectenna is an RF to DC conversion process where a distant transmitter must power the rectenna circuit. It is assumed that the "Black Box" was based, in part, on this patent, but that a variation on the receiving "conducting-body" allowed the device to work without a transmitter, at least a man-made one. In addition to Tesla's other lines of research, there is some prior art to lend credence to the Black Box Legend. T.H. Moray's work, Wilhelm Reich's Orgone Motor, the recent Correa patent 7,053,576 and even DARPA all have basis in reality and by following a certain line of reasoning we can conclude this family of technologies can be back-engineered and innovated to the point of marketability. With due diligence and open minded R+D the ideal technology is realized.

DARPA has replaced the receiving conducting-body of the basic rectenna circuit with a nano-fabricated film, the design of which governs what frequency it will sympathize with. It can be manufactured to phase-lock with any frequency. They settled on the optical band and this effectively makes the SUN the transmitter.

It stands to reason then, that a rectenna could be pumped by the Earth's Schumann frequency, correct? If this is valid then it is also valid that the inventor of radio and fluorescent lighting could devise a plasma discharge tube tuned to the Schumann frequency (of which he was well aware) and that this tube replaced the conducting-body in his rectenna circuit. No violation has taken place, yet it is free energy, correct?

To go even farther in our independence and truly tap space energy instead of just the oscillations in it, I have designed an "Aether-Electron Coupling Rectenna" where aether is the uncollapsed superelectron or quantum plenum beneath the Zero Point Energy.

Imagine that a rectenna is a mug full of coffee (in honor of Feynman) and that the energy used in the load is the liquid coerced out of the mug. A normal rectenna requires that I blow straight down at it to create waves that spill over. The mug "refilled" equates to my lungs expanding. (A perfect analogy as it reflects the opposing paradigm's interpretation of a "closed" system, the RF to DC conversion has losses as does the mug but something is refilling the mug, the question is, is it coffee/electricity or air/aether?)

My rectenna simply pokes a hole in the mug and it "miraculously" refills as part of a free space Krebs cycle* (1-3). The vacuum only abhors itself when local space is pulled apart. Whereas polarizing the vacuum creates a bubble of negative energy and gravity waves, monopolarizing the vacuum implodes gravity waves and creates a bubble of positive energy.

This process begins by corralling a charge cluster inside the discharge tube from a noble gas inside. The corral is formed by external "scroll electrets" (My innovation to the design) that passively [1 excite the gas.]

The charge cluster is at the center of the population inversion and collapses into divergent electron beams when the tube is [2 degaussed]. This [3 induces a scroll wave in the electrets - of an internal/negative, ordered EM energy. This enfolded influx becomes scattered and local (i.e. positive, useful) as it passes inward through the double layer], then inverts [1 back out the center, transitioning into a charge cluster again.]

1 - quiescent - even excited this stage is still considered static
2 - excited - degaussing/discharging = field collapse and beam divergence
3 - refractory - this is the refilling of the mug, the abhorring of the vacuum
1 - quiescent - charge cluster reformed, scroll wave initiated like in a BZ reaction

The Scroll Electrets of my Aether-Electron Coupling Rectenna rely upon a specific conditioning process similar in function as the one Floyd Sweet used for his VTA. (Note the charge cluster here is analogous to the VTA's "bubble"). One thing all the mentioned rectenna designs have in common is that they rely upon sympathetic resonance between a source and drain. In this case however the Scroll Electrets hold the memory of the frequency they are conditioned at so that they can sympathize with the circuit later, this mimicks the oscillations from a transmitter. The frequency must be congruent with the preconditioned wax, the capacitor bank, tube (wave)length, electret conductor dimensions and switching device for the rectenna to be a temporally and geometrically tuned circuit.

In addition to this tuned state, the orientation of the scroll electrets around the tube is important, they must wrap in opposite directions. They also must be centered with minimum distance between them. This geometry is intended to aid the corralling of negative energy and induce a mesoscopic vortex in the plasma.

It is believed that the device, like the VTA, will automatically match the load in the circuit until a critical point. What this point could be is speculative. If truly negentropic it will lose temperature until a phase-transition turns the cold plasma into a superfluid, but this would also constitute component failure.

The Auto-Inductive Rectenna is a simple and robust means of "vacuum engineering", which, if integrated into an otherwise battery laden vehicle would drastically lower weight and increase range (as if - range is a measure of refills!) thus increasing performance and lowering cost.

(http://b7.ac-images.myspacecdn.com/01263/79/73/1263523797_l.jpg)
(http://a103.ac-images.myspacecdn.com/images01/67/l_d03fb9e4c3efc2d1c4fe128394f837e6.jpg)
(http://www.amasci.com/graphics/tes_radpat2.gif)
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: hansvonlieven on November 30, 2007, 08:12:56 PM
G'day Kalki,

This is word for word something that was posted on the 25th September 2006 on the Focus Fusion Forum.

http://focusfusion.org/log/index.php/forums/viewthread/45/

Was that posted by you under the handle of Matty ? And why is this surfacing here now, any development since?

Hans von Lieven
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: Kalki on November 30, 2007, 11:18:44 PM
Yes, that was me...

I've been out of the FE/AG scene for awhile since getting seed capital seems like a waste of time, instead I've been trying to get a less fringe invention going - www.arcfoaming.com - figuring if that is licensed I'd use the royalties towards the AIR.

My arc foaming technology is currently being considered by a "major automotive manufacturer" via www.ninesigma.com (Thanks Sterling Allen for the link to them!) and I should know within the next month. Unfortunately I've no business savvy and no real partners to help with any of my IP.

I guess I posted here because I just found this "Tesla Crop Circle" and it seems to validate my theory regarding scroll waves (I learned about scroll waves in the book SYNC by Steven Strogatz; they are primarily studied in biological systems but their ubiquity, spiral geometry,  "perpetual motion" Krebs Cycle and such piqued my biomimetic interest. Since these waves occur in ANY excitable media I thought of the "Scroll Electret". This also all correlates to quantum coherence, solitons, continuous phase-transitions in the form of "collapsing" waves etc,...)

An earlier FE device was modeled on the earth's geodynamo in biomimetic fashion, I feel this design is like a heart.

Also I'm on the verge of being evicted, our car broke down, had to send my daughter to go live with relatives, phone, gas and electric are about to go and I'm in a desperate state of mind. Gas keeps going up, we had two oil spills within 48 hours, and I'm sick of seeing these feel-good, self-congratulatory, damage-control, "ecoimagineering" "It's a start" advertisements by the fossil fuel industry...And my would-be partner, who I thought I knew, who claimed to want to be involved with alt.energy claimed that even if FE hit the shelves tomorrow, it'd still take 30-50 years to phase out fossil fuels.

I wholeheartedly disagreed and haven't spoken to him since.  So I'm really desperate and really angry.

If anyone has the ability to grasp my ideas and actually build the AIR, please go ahead, I don't have money, tools or a lab.
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: hansvonlieven on November 30, 2007, 11:52:54 PM
G'day again,

I hate to say it but your friend is right. There were still working (ands I mean full time, productive) steam engines around in the 1950's and 60's, not to mention steam trains which are still not completely phased out in some countries.

That need not to be a deterrent though. Even if only five percent of internal combustion engines were phased out per year the market would still be enormous and I don't believe we even have the capacity to replace more.

I am sorry to hear that you find yourself in such dire straights. Do not lose hope, nothing lasts forever, not even a bad time. Something will turn up.

Hans von Lieven
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: Kalki on December 01, 2007, 06:02:07 PM
What isn't factored in is that there are literally hundreds of alternatives being developed and marketed as we speak..
Peak oil already happened.
Americans are getting fed up.
The petroleum that powers our transportation depends on petroleum to be distributed.
Political, economic, social, and environmental trends are all pointing towards a paradigm shift.
The petroleum infrastructure is subject to disasters and sabotage.

I think its funny when people suggest that FE will ruin the economy...as if our forced dependence on petroleum isn't already ruining the economy.

Here's how I see it being phased out in 5 years:

Since America consumes the most it is the arbiter of the market, developing countries follow our lead including China...

Hurricanes, earthquakes and bad weather in general will destroy most refineries in the next 10 years...
About a year from now my invention will be revealed, making consumers eager for it.
Based on the Citizenre model of renting units for home use and AC Propulsion's model of retrofitting vehicles combined with a manufacturing franchise, nearly every county in every state will have a market. Micro Manufacturing meets Micro Generation.

The vehicle retrofit operation will offset the costs of installation and manufacturing by recycling the entire engine to be replaced, the AIR/Motor unit will be a universal design so that it can easily be installed in any vehicle.

Once this gets going a Standard Oil model of a monopoly will result, the competition will either adapt/join or die.

Nobody has done this before, that's why it will work, my competition is not as obsessed as I am which is why I will win.

http://www.youtube.com/watch?v=oD3ykii8I8k
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: Kalki on December 03, 2007, 07:43:54 PM
Trying hard not to come off as another Free Energy Messiah before I have the goods, just megalomaniacal by nature, sorry...

Studying this crop circle and the other posts makes me wonder if tapping electrical energy from the tube isn't backwards.

I see the crop circle has 2 spark gaps where my design has none (I assume a spark gap and cap bank serve the same purpose but I'm actually quite ignorant of basic electronics) but that they share the same positive electrode.

I'm assuming the 3 circles between the outer part of the spiral and the terminal of the circuit represent a cap bank and/or downstep transformer.

I always see the electronic phase of the spiral from the center out, expanding, slowing down, and the aether phase as the opposite, the crop circle suggests that the electricity should be tapped from the outer part of the electret, not the tube as my design shows (Of course we assume the crop circle can't show such details but suggests things symbolically as best as it can).

What if there is one diode coming off the tube and one scroll electret and those two terminals create a potential on the positive? A two-stage spark gap that can create a positive feedback and exchange of both inward and outward phase of energy?

Hmmmmm?

Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: Kalki on December 06, 2007, 05:32:17 PM
OK, so I figured out that the "2 stage spark gap" is really a transistor. The discharge tube is the source/sink and the 3 circles between the scroll electret and base of the transistor is a harmonic capacitor bank.

I realized my original design is "serial" and would not become a cold running negative resistor.

The crop circle design would be "phase-conjugated" pump that would render the wiring into a plasmon.

It would be "Auto-Tuning" and would not need an independent switching device.

If it sounds like I'm talking out my ass its because I've no real education in electronics and rely on intuition and a physics dictionary.

I am impressed with the fact I independently reached similar conclusions as some of the other posts regarding electrets...
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: Cap-Z-ro on December 07, 2007, 01:39:33 AM

You and I are in the same boat, so to speak...how I longed for a technical background to understand the diagrams as they began to become more complicated and technical.

Its great just being among creative minds who are here to make the world a better place for no other reason than that.

By necessity I had to take the creative artistic route in life.

Better late than never though.

*watching and learning.

Regards...
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: slapper on December 07, 2007, 02:03:59 AM
In reference to the crop circles I'm sure many of you have already seen these videos from:
http://www.cropcircleship.com (http://www.cropcircleship.com) or their wiki http://www.cropcircleship.com/wiki/Main_Page (http://www.cropcircleship.com/wiki/Main_Page)

For those who have not seen these videos; enjoy :)

Video 1: http://video.google.com.au/videoplay?docid=-5754670943097613356&q=crop+circles (http://video.google.com.au/videoplay?docid=-5754670943097613356&q=crop+circles)
Video 2: http://video.google.com.au/videoplay?docid=-433288732754891412&q=crop+circles (http://video.google.com.au/videoplay?docid=-433288732754891412&q=crop+circles)

Take care.

nap
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: Kalki on December 07, 2007, 09:48:15 PM
Thanks Cap and Slapper.
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: Kalki on December 16, 2007, 07:01:26 AM
from the correa pagd in action thread:

1?: charge of C, slowly
2?: when the tube?s breakdown voltage is reached, C discharges
3?: ions+ and e- are expelled of cathode thanks to a kind of ?quantum?explosion ??
4? the e-, attracted towards the anode go there rather quickly and charges C,  R ballast blocks them a certain time: the ion+ return to cathode


Is this not the krebs cycle again?

I read about something similar in The Big Bang Never Happened, something about a mercury vapor rectifier in Sweden's power grid, the pressure was too low...
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: Kalki on January 11, 2008, 06:22:21 PM
(http://jitcrunch.cafepress.com/jitcrunch.aspx?bG9hZD1ibGFuayxibGFuazoxNTJfRl9jNi5qcGd8bG9hZD1MMCxodHRwOi8vaW1hZ2VzLmNhZmVwcmVzcy5jb20vaW1hZ2UvMTk5OTM3MjRfNDAweDQwMC5wbmd8fHNjYWxlPUwwLDEyNSwxMDUsVHJhbnNwYXJlbnR8bG9hZD10bS1MMCxibGFuazoxNTJfRl9jNl90bWFzay5qcGd8Y29tcG9zZT1MMCx0bS1MMCxUZXh0dXJlTWFzaywtMTcyLC0xMDJ8Y29tcG9zZT1ibGFuayxMMCxBbHBoYUJsZW5kLDE3MiwxMDJ8Y3A9cmVzdWx0LGJsYW5rfHNjYWxlPXJlc3VsdCwwLDQ4MCxXaGl0ZXxjb21wcmVzc2lvbj05NXw=)

charon.colorado.edu/Microwave/papers/2000/EuMC_JHnlBP_00.pdf

The above pdf discusses harnessing random EM waves of varying wavelengths, of interest is the design of one of the rectenna receiving bodies, it is spiral.
This is significant.
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: hansvonlieven on January 11, 2008, 11:28:46 PM
Thanks Kalki for a fascinating paper.

Good find.

Cheers

Hans von Lieven
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: Kalki on February 02, 2008, 06:29:02 PM
(http://www.eskimo.com/~ghawk/fogal_device/fig1.gif)

I believe that Fogal's Charged Barrier device and the Crop Circle are similar in that we have a bipolar transistor...The Fogal transistor has the electrolytic capacitor and resistor parallel coming off the emitter side, in the crop circle though, the emitter, base, and collector are all a closed system. Instead of auto-targeting, the crop circle rectenna would become auto-tuning, as the load/resistor is bleeding-off in parallel to the base.

This charge-coupled rectenna utilizes the closed and open paths...that is where the coupling occurs, in the sink, between the closed circuit and ambient vacuum. This rectenna does not use incident wave energy, it uses the expansive phase of a scroll wave...the electron charge cluster is a soliton in the sink...

Perhaps the rectenna should use an electrolytic capacitor instead of a diode-cap bank?...Does the scroll electret already perform the same function? But it has only one plate... The lower topology is just the foundation for the phenomena we want to exploit at the higher topologies. We shouldn't care about creating a geometrically and temporally tuned circuit if its auto-tuning. Once the right parts are connected...

Just talking to myself for the record...still trying to intuit my way through this, If I get to a scanner maybe I'll show the updated design
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: Kalki on February 02, 2008, 06:46:36 PM
Reading up on the Fogal Transistor, Beardens comments about the string holder:

Now suppose we insist that the distortion correction theory applies not only to waves, but also to the photons comprising them. In that case the antiphotons comprising the antiwave and the photons comprising the wave are performing a most interesting dance: The passage of the two waves precisely through each other spatially, as they travel in opposite directions (as perceived by the external observer), must result (from a spatial observation) in the continual coupling and decoupling of photon/antiphoton couplets. But such a couplet is a massless spin-2 entity and therefore a graviton. So coupled gravitons comprise this gravitational wave, each graviton of which is continually forming and unforming. In short, gravitation and electromagnetics are continually turning one into the other, in this "standing wave". Here is where electromagnetics and gravitation unify -- and it is precisely this area that was discarded unwittingly by Faraday and Maxwell when they discarded the string holder and its antiwave.

This passage is well illustrated/animated here:

http://www.kettering.edu/~drussell/Demos/reflect/reflect.html

Does the bleeding-off and auto-tuning have to do with differences in the string and string holder? Is the formation of a supercurrent merely the heterodyning of one charge into the antiphase of its own amplified feedback?

Do I have any idea of what I'm blabbing about?

Ahh! Occult technojargon overload!
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: Kalki on March 14, 2008, 06:04:19 AM
(http://viewmorepics.myspace.com/index.cfm?fuseaction-viewImage&friendID=112054390&albumID=0&imageID=14351798)

This is the revised version.
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: Kalki on March 14, 2008, 06:08:24 AM
(http://a733.ac-images.myspacecdn.com/images01/62/l_1e5d6b0e1e8fda2c11dc3064afaf7bcc.jpg)
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: z.monkey on March 14, 2008, 11:43:34 AM
Howdy Kalki,
Forget about the mirror universe.  There are no anti-photons, anti-matter, anti-this or that.
Think in the physical realm only.  Simplify your thought processes.  In electrical science there is a thing called a positron, which to them is an anti-electron.  This is nebulous double think.  A positron is a place in space where and electron could have been, in essence, nothing.

I have looked at your Rectenna.  It is possible to do what you want, rectify RF energy and output DC.  Do you have a Tolltag?  They use this technology, in a practical application, commercially available today.  There is a transmitter in the toll booth.  It transmits power at the approaching vehicle.  The Tolltag receives this energy, rectifies it and uses it to power a microcontroller and a radio transmitter.  This in turn transmits an identification number back to the toll booth.  This tells the toll booth who is passing.  They have your account on file and charge your credit card a 50 cent toll.  Now this is just a tinsy tiny amount of power.

However you want POWER!  Like to run the house and the air conditioner.  Earth's magnetic field resonates at 7.8 Hertz.  To do what you want you need to make a resonant tank (LC) circuit that will resonate at that frequency, then rectify the power using a full bridge rectifier with BIG diodes.  To attain a resonant frequency of 7.8 hertz you will need a BIG inductor and BIG capacitor for your tank circuit.  You will need to figure out these values using inductive reactance and capacitive reactance formulas with respect to LC tank circuits, probably have to build you own inductor, and it will not be cheap.  The ground side of the tank circuit is attached to earth ground, which is a long copper spike pounded into the ground.  The power side to the tank circuit will need to be an antenna which is at least 1/4 wavelength of your desired frequency.  At 7.8 hertz that will be a very long antenna.

Free energy is cheap, devices that generate free energy are NOT!

Gets books about Henry Moray's devices and Tesla's Resonant Power Generator.

Remember, first think, then plan, then act...

Hope you have fun with this...

Blessed Be Brother

Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: wings on March 14, 2008, 12:27:10 PM
crop circles?

just tests of this technology

http://www.eastlundscience.com/SOLUTIONS.html
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: Kalki on March 15, 2008, 04:43:02 PM
Howdy Kalki,
Forget about the mirror universe.  There are no anti-photons, anti-matter, anti-this or that.
Think in the physical realm only.  Simplify your thought processes.  In electrical science there is a thing called a positron, which to them is an anti-electron.  This is nebulous double think.  A positron is a place in space where and electron could have been, in essence, nothing.

I have looked at your Rectenna.  It is possible to do what you want, rectify RF energy and output DC.  Do you have a Tolltag?  They use this technology, in a practical application, commercially available today.  There is a transmitter in the toll booth.  It transmits power at the approaching vehicle.  The Tolltag receives this energy, rectifies it and uses it to power a microcontroller and a radio transmitter.  This in turn transmits an identification number back to the toll booth.  This tells the toll booth who is passing.  They have your account on file and charge your credit card a 50 cent toll.  Now this is just a tinsy tiny amount of power.

However you want POWER!  Like to run the house and the air conditioner.  Earth's magnetic field resonates at 7.8 Hertz.  To do what you want you need to make a resonant tank (LC) circuit that will resonate at that frequency, then rectify the power using a full bridge rectifier with BIG diodes.  To attain a resonant frequency of 7.8 hertz you will need a BIG inductor and BIG capacitor for your tank circuit.  You will need to figure out these values using inductive reactance and capacitive reactance formulas with respect to LC tank circuits, probably have to build you own inductor, and it will not be cheap.  The ground side of the tank circuit is attached to earth ground, which is a long copper spike pounded into the ground.  The power side to the tank circuit will need to be an antenna which is at least 1/4 wavelength of your desired frequency.  At 7.8 hertz that will be a very long antenna.

Free energy is cheap, devices that generate free energy are NOT!

Gets books about Henry Moray's devices and Tesla's Resonant Power Generator.

Remember, first think, then plan, then act...

Hope you have fun with this...

Blessed Be Brother



I love it when people tell me what I should invent and then proceed to explain in detail "MY" invention.

I already speculated that a rectenna could sympathize with the Schuman frequency, but it is variable and also a brainwave frequency, and trust me dude, I already played with mind control and the results were not positive, ahem,....

Free energy does not have to be expensive, why my little contraption wouldn't be more than a hundred dollars, what is expensive is finding people with a clue, tools, and facilities.

Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: z.monkey on March 16, 2008, 01:59:53 PM
Hey man,
Don't look a gift horse in the mouth.
I'm an electrical engineer, I could help you, I do have experience in this stuff...
Blessed Be...
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: Kalki on March 21, 2008, 03:36:26 PM
Hey man,
Don't look a gift horse in the mouth.
I'm an electrical engineer, I could help you, I do have experience in this stuff...
Blessed Be...

I appreciate it, sorry...then perhaps you are the one to help me, as I stated, basic knowledge is not my strength, pretty funny but thats why I also welcome help learning to fill those gaps.

Is there any such thing as a bipolar spark gap transistor, because i believe that's what the crop circle shows, and perhaps it is symbolic of a normal bipolar transistor.

Do you see elements of the fogal transistor or charged barrier technology? The resistor  or in this case load is bleeding off energy, and if it ain't there the device doesn't function.

See the negative resistor element?
The Rectenna?

What's original? The scroll electret with a discharge tube nested in it. That is the aether sink, what links the open and closed aspects, in a way it too is a transistor and spark gap.

 Instead of incident waves bombarding an antenna sticking up in the air, the antenna is rolled up in charged wax and gets washed in an expanding scroll wave over and over, the electrical phase - to diode - to cap bank - to transistor base.

Charge distribution in a 3 element system mean anything?
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: z.monkey on March 22, 2008, 02:18:23 AM
OK, lets take a look at the terms you are using first.

A bipolar transistor and a spark gap are different things.  Transistors are sensitive to, and can be destroyed by high voltage.  Spark gaps are only used in high voltage.  The two are not compatible and will probably never be combined.

A Fogal transistor is a fictional device.  It has attributes that are not feasible.  Now transistors may be used to generate 3 dimensional electromagnetic fields, but that is the inductor which is generating the magnetic field and not the transistor.

A negative resistor is a battery, or a power source.  The opposite of resistance is conductance, so an negative resistor is a positive conductor.

A rectenna is a device used in microwave electronics at very high frequencies, in the gigahertz range.  It is a rectifier and an antenna combined to decode information from microwave transmissions.

Schumann frequencies are in the ELF band (Extra Low Frequency), and are not compatible with a microwave frequency rectenna.  The wavelength of microwaves are on the order of a foot, while the wavelength of Schumann frequencies are the circumference of the Earth.  You are right about brainwaves, they are close to the frequency of Schumann waves.  If you were to make a rectenna which could receive Schumann waves it would be the size of the United States, and then some.

I don't know what a scroll electret, discharge tube or a aether sink are.

OK, first of all DO NOT get discouraged by what I have said here.  You have an active imagination, and   you have ambition.  These two qualities are very important for people who invent things.  Also you have a desire to create, probably the most important thing for an inventor.  Now you may be telling yourself how does this dude know so much about inventors?  Well, let me tell you about myself first.

I had always been interested in electronics since I was a child.  My father taught me a lot about basic electronics when I was a small child.  This was always very fascinating to me.  But my father died when I was 13, and my inspiration was gone.  I lost my path, and drifted for years.  I believe that there was a divine intervention in my life when I was 19.  I met a person who seemed to know everything.  He became my mentor.  He pointed me back toward the path that I was lost from, electronics, science, physics, and ultimately free energy and anti-gravity.  I still have limited contact with this person, and he still inspires me.  His advice to me, in a nutshell, was to never quit learning.  At 19, I had a lot of questions.  My mentor taught me that all the information that you will ever need already exists in the world, all you have to do is find it.  This, of course, was a lot harder before the internet.  So my quest began.  I had a hunger to learn about these strange and fascinating things that seemed like science fiction, but I knew that they could be realized in this world.  Things like free energy, and anti-gravity, and hyperspace.  So I went to bookstores and libraries, and I went back to school.  I spent every free moment digging for information.  I started from below the bottom, and learned how to invent.  A piece of advice that he gave me was that before you can innovate, you have to know all that is known.  You literally have to understand how everything works before you can make something that doesn't exist yet.

So now I am established inventor.  I have designed products that are available to be purchased today.  I have applied for patents.  I have built top secret technology for the government.  I have solved a plethora of problems that other people couldn't solve.  I am employed as a Research and Development Engineering Technician, and I solve difficult problems for a living.  What I am telling you Kalki, is never, ever quit learning.  Spend as much time as possible expanding your mind.  Look at every experience as a learning opportunity.  If you are interested in electronics, start there.  Learn the fundamentals as thoroughly as possible and go up from there.  You must understand everything that is known to man before you can innovate and invent new technologies.  I know this seems like an insurmountable task from where you are now.  But with every success, no matter how small, you will grow, and gain confidence.  As you build your foundation of knowledge you will be able to look back and see the accomplishments that you have earned.  Before long you will be solving problems that you could not have even comprehended yesterday.  For every effort there is an appreciable gain.

My divine intervention happened a short 20 years ago.  It has been an arduous journey.  But it has also been a exciting and rewarding journey.  I would love to show you my accomplishments, but I have decided to remain anonymous on this forum for security reasons.  Maybe, in time, when I feel that the  danger to free energy researchers is mitigated I will be able to reveal myself.  In the meantime, get a basic electronics book, learn every fundamental, do every experiment.  Then get the advanced electronics book and do the same.  Study math, and science and physics.  Keep watching the alternative technologies.  See yourself achieving the goals you want to accomplish and never give up on your dreams.

Your idea of rectifying power from the ethers is possible.  There are many people all around the world working on it.  Being a part of this forum you have the benefit of cutting edge ideas and technology.  Read all the threads.  Wait for something that resonates within your soul.  Then pursue it.  Start small, a scale model perhaps.  Expand your consciousness in small steps, as this is the way that suits mankind best.  Pick a concept and learn it thoroughly, then move forward.  As you progress up the steps you will be able to trace back your path and see how you have grown.

So, anyway I hope this can benefit you.

Blessed Be Brother...
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: z.monkey on March 24, 2008, 06:42:56 PM
Hey Kalki,
I thought of a way that you can have a spark gap and a transistor.  I have had your device in the back of my skull for a couple of days.  Your spark gap transistor might be a transistor driving a relay, or a set of points.  I have a theory that a spark is ripping a hole in the physical universe.  This hole lets energy from the etheric plane into the physical plane.  Rather than running your rectenna at Schumann frequencies maybe you should run it at high frequencies.  This way you could have a compact device.  You would need a RC tank circuit to set your frequency, but rather than using a transistor to modulate the power use a very fast relay.  Or maybe use high voltage and a fixed, very precise spark gap, and the transistors are used to generate the high voltage through a step up transformer.  I'll let the idea continue to fester.

Back when this free energy stuff started, in the early part of the 20th century, all the researchers had to use tubes and spark gaps to make oscillators.  Transistors may not be able to do what tubes and spark gaps do.  In a transistor there is no free space that the electricity travels through.  In both tubes and spark gaps electricity is flowing through free space.  This may be the key to getting free energy to work.

Blessed Be Brother...
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: Kalki on March 25, 2008, 02:43:19 PM
Z,

I too study everything for the reason of wanting to "know the mind of God". What I lack in linear math skills and basic electronics is made up for in the range of knowledge, so I've strengths and weaknesses.

The scroll electret is the key here. Without that you don't have scroll waves. NOBODY in the FE scene, despite speculation on using electrets somehow, has clued in on scroll waves, mainly because they are studied in biological systems.

Look at a BZ reaction, then look at chakras, then look at self-quantizing vortices in BEC, then torsion fields, its all the same thing! Krebs cycle, so ubiquitous in nature...

The scroll electret and discharge tube represent the aether sink, it has a lower energy state than the surrounding aether so the aether flows in on the scroll wave, thats the inward phase, the aether phase, the outward phase is the electronic phase. The transition occurs in the phase-singularity/soliton/electron beam in the discharge tube. The scroll wave is induced when the DC is added to the scroll electret, it accumulates enough charge and discharges...Read the book SYNC http://www.news.cornell.edu/chronicle/03/3.13.03/Strogatz-Sync.html

Strogatz is the authority on Scroll waves.



Oliver Nichelson has some excellent reporting on what Gerry Vasilamous (however his name is spelled) also discusses, The Black Box Legend:

Read this, it elaborates on the importance of the sink:

http://home.comcast.net/%7Eonichelson/Fuelless.pdf

This is my understanding of Gods Mind btw:

(http://a31.ac-images.myspacecdn.com/images01/66/l_1de8aa701b5eef50853a3f22cc14c236.jpg)

Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: Kalki on March 26, 2008, 01:58:15 PM
Torsion Tensor = Spin Field

(http://a638.ac-images.myspacecdn.com/images01/3/l_d1aba44c998248c16fe2e5bd6f5b5475.jpg)

BZ Reaction

(http://a231.ac-images.myspacecdn.com/images01/123/l_6c988e9ce15726684af638e0967990d6.gif)


Vortex-Sound in BEC

(http://a370.ac-images.myspacecdn.com/images01/17/l_a7a12f4e2e97342cca0a4cc754228db9.jpg)

Scroll Wave

(http://a150.ac-images.myspacecdn.com/images01/28/l_e11f592b5b1de5c0fe7e0f5db5c2c78d.jpg)

Chakras

(http://a289.ac-images.myspacecdn.com/images01/11/l_396b932dde098e449248ba8aafca0308.gif)

Galaxy

(http://a707.ac-images.myspacecdn.com/images01/103/l_b299128234d560fe0c4b13cc6be67d32.jpg)

The innate PHI of Transdimensional Space is reflected in the ubiquity and scale-invariance of the spiral/vortex. The space between Electric and Magnetic Fields.
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: z.monkey on March 26, 2008, 02:35:17 PM
Howdy Kalki,
Yeah, I was unaware of most of that.  However am aware of the interaction of energy and matter.  As energy decelerates its linear motion turns into tight little spirals we call matter.  As matter accelerates to relativistic velocities its tight little spirals turn into straight lines.  I am working on a device that is part orgone accumulator, part transformer.  Check out my Soft Particle Physics thread.  Orgone, bions, chi, manna, and pranna are all synonyms for biological energy.  You and I may have been looking for each other.  I've got the electronics side down, solid.  You have the etheric spiritual vortex side of the equation.  I think with some collaboration we could come up with a working generator.  I am fixing to post some more research on the Soft Particle Physics thread this evening.
Blessed Be Brother...
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: Kalki on March 26, 2008, 03:24:55 PM
When I was a little boy of about 5, I always looked forward to bath time, not cuz it was warm and wet like the womb, but because I loved to experiment.

I studied foam coursening, wave mechanics, acoustics and hydrodynamics but I didn't know that.

I claim to be the reincarnation of Tesla. One of my subtle/subjective clues is that during bathtime I INSTINCTIVELY replicated "constructive interference" or "wave amplification".

I'd push my hands like paddles on either side of me forward, a wave propagates, hits the end of the tub towards my toes and comes back, hits the wall near my butt, comes forward again, just as it passes I give it an equal shove as the first, the wave gets bigger, repeat. How many shoves does it take to get it near making a huge mess I'll get in trouble for?

This was exactly the mindset behind Akkaeneset in Atlantis and the resurfacing of that again as Tesla in his myriad experiments of pushing resonance to its limits. have you read his" Mans Greatest Achievement"?

by Nikola Tesla

    There manifests itself in the fully developed being - MAN - a desire mysterious, inscrutable and irresistible: to imitate nature, to create, to work himself the wonders he perceives. Inspired to this task he searches, discovers and invents, designs and constructs, and covers with monuments of beauty, grandeur and awe, the star of his birth. He descends into the bowels of the globe to bring forth its hidden treasures and to unlock its immense imprisoned energies for his use. He invades the dark depths of the ocean and the azure regions of the sky. He peers in the innermost nooks and recesses of molecular structure and lays bare to his gaze worlds infinitely remote. He subdues and puts to his service the fierce, devastating spark of Prometheus, the titanic forces of the waterfall, the wind and the tide. He tames the thundering bolt of Jove and annihilates time and space. He makes the great Sun itself his obedient toiling slave. Such is his power and might that the heavens reverberate and the whole earth trembles by the mere sound of his voice.

    What has the future in store for this strange being, born of a breath, of perishable tissue, yet Immortal, with his powers fearful and Divine? What magic will be wrought by him in the end? What is to be his greatest deed, his crowning achievement?

    Long ago he recognized that all perceptible matter comes from a primary substance, or a tenuity beyond conception, filling all space, the Akasha or luminiferous ether, which is acted upon by the life-giving Prana or Creative Force, calling into existence, in never ending cycles, all things and phenomena. The primary substance, thrown into infinitesimal whirls of prodigious velocity, becomes gross matter; the force subsiding, the motion ceases and matter disappears, reverting to the primary substance.

    Can man control this grandest, most awe-inspiring of all processes in nature? Can he harness her inexhaustible energies to perform all their functions at his bidding? more still cause them to operate simply by the force of his will?

    If he could do this, he would have powers almost unlimited and supernatural. At his command, with but a slight effort on his part, old worlds would disappear and new ones of his planning would spring into being. He could fix, solidify and preserve the ethereal shapes of his imagining, the fleeting visions of his dreams. He could express all the creations of his mind on any scale, in forms concrete and imperishable. He could alter the size of this planet, control its seasons, guide it along any path he might choose through the depths of the Universe. He could cause planets to collide and produce his suns and stars, his heat and light. He could originate and develop life in all its infinite forms.

    To create and to annihilate material substance, cause it to aggregate in forms according to his desire, would be the supreme manifestation of the power of Man's mind, his most complete triumph over the physical world, his crowning achievement, which would place him beside his Creator, make him fulfill his Ultimate Destiny.

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

I mention all this now because I don't want anyone who partners with me to have any misunderstandings about me and my trip. My claims, while currently for entertainment purposes, are serious potential.

Technological claims prior to actual prototyping are tolerable, thats what invention is.

Reincarnation and all the other New Agey, paranormal phenomena are a given to me as they are all symptomatic of either non-locality or non-linearity, which an aether-based, multidimensional space clearly allows for or demands.

Before you think I'm a typical case of ego-wanting-to-be-someone-famous, i admit that oversouls splinter in convoluted ways. While I AM Kalki/Christ and Tesla, I AM not the only one resonating with The Word, I f I was whats the point.

Anyway...the best part of bath time was draining the tub, y'know why?

Vortex Experiments!

Flash forward 28 years later and I have bought a 5" stainless vortex tube from Arizona Vortex:

(http://www.rmcybernetics.com/images/main/pyhsics/vortex_tube.jpg)

Put that in two of these = 18,000 gauss:

(http://www.supermagnetman.net/images/r1302.gif)

And I made me some M-State MicroCluster water.

I learned that a film of Microclusters on water have non-local attributes, they are quantum coherent. When I siphoned from one side of the bowl, clusters on the entire surface would decohere simultaneously, evenly, at the same rate.



Yeah, I got the far out side covered.
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: z.monkey on March 26, 2008, 04:21:05 PM
Speaking of vortex's I have a device called a water vitalizer which produces hexagonal water.  It uses magnetism, a vortex and mineral form calcium to produce water which is a calcium atom surrounded by 6 water atoms.  It has reversed my aging process.  I process the vortex water on a daily basis.  Me, my wife, and all our kids drink it.

http://rgarden.com/retail/index.php?refmail=wl@rgarden.net&customers_referral=store&main_page=product_info&products_id=47

Don't misunderstand me here, I don't sell these things.  It's just something that reinforces your idea about the vortex, possibly the most powerful physical force in creation.
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: Kalki on March 26, 2008, 04:58:43 PM
Seems like a variant on the vortex trap I made. I'd buy it just to see the swirlies.
Title: Re: Auto-Inductive Rectenna via Scroll Waves
Post by: Kalki on March 27, 2008, 02:25:53 AM
from Mr. Volland in Eds Capacitor thread, it explains. in part,  what I'm intending to do with the scroll electret and discharge tube:

Thank you for your research.  The HF generator effect of Moray's Sparking Condencer which you have found correlates to the report that Ed Gray referred to his Tube as an "inverter".  The high frequency generation involves the capacitive cylinders being in a tank circuit with the connective loops forming the inductances.  This effect is detailed in Farnsworth's patent #2,189,358 for his high frequency Diode Oscillator.  An examination of Gray's circuit shows that a potential exists on the grids, relative to the central rod, due to the connection - through the battery and motor - of the capacitor negative with the grids, with differing distances from the center resulting in different relative potentials on each grid.  Since the RF vibration of the gas in the tube produces impact ionization, the momentary 12 Volt displacement current through the cap results in the static charge build up he referred to as 'overshoot voltage'.  As he asys in the patent, the Tube is a "switching element", allowing the 12 Volt current to flow when the circuit is closed, with the pre-existing ionizing potential making the Tube conductive.  As a result of this static charge, his system cap is totally recharged in an instant, rather than with the series of impulses first used from the transformer.  This indicates his Tube has a capacitance at least as high as the system capacitor.
Jerry