Free Energy | searching for free energy and discussing free energy

OK
HOW I WHIIL START  I HAVE NO TIME TO BE IN THE FORUM BUT I LIKE TO SAY SOME THINGS
FIRST 
1  THE TPU S.M IS NOT NEED TRANSIS . OR SOME TUBES   ONLY KICK OF WIRES  THAT IS THAT 
2 EVRETHING IS YOU NEED IS TO SEE VIDEO READ SOME PDF AND LEARN SOME STUFF AND IN THE END YOU FIND THE WAY 3  SM SAY HIS TPU NEED MAGNET TO START   AND IS TRUE  PEOPLE MAKE ANTHER STEP UP  DONT LOOK BACK
I HAVE SEND SOME WRD OS SM VIDEO CLIP AND IS SAY  <<< WIRES IS IMPORTANT AND COILS IN THE OPERATIONS >>THIS IS TELL THE TRUE HOW IS POSIBLE 
ONLY WIRE AND MAG. HMMMMMMMMMMMMMMMM
 I KNOW WHILL SEND TO ALL VIDEO TO SEE  BUT WIT SECRET
I HAVE SEND MANY EXPLANATIONS  IN <<<<<< DAYS AND I DONT EXPLANE NOTHING   HOW YOU DON T ANDERSTEND   AND SM ISAID FIND THE WAY TO MOVE ELETRONES IN WIRE IS SIMPLE  NO ELEKTRONICS ONLY WIRE  I TEELING THE TRUE   SEE MAKE EXPERMENTS AND SEE 

THE LITLE HELP YES THE TPU MUST BE SINUS WAVE ONLY SINUS WAVE IS GET TRUE POWER  SM IS TELL SOME GOOD THINGS  TO FIND THE WAY BUT YOU ARE ATELL LOSE THE WAY YOU LOOK FOR PDF FOR VIDEO OR SOMETHING  PIC WHIT  3 MEGA PIXEL TO ZOOM WHAT IS INSAID 
LOOK  IS SO SIMPLE  IS LIKE TR .  BUT ANTHER TR . 

LOOK THIS
 I SAID MANY TIME TO FIND THE WAY WHIT THIS   
MAKE ONE KICK TO MAKE 1000 OR MORE KICK   YOU  FIRST KICK IS YOU PUT THR ENERGY IN THEN NOTHING ELSE   I SAID LIKE ANTHER TR   YOU MAKE NO SIMPLE FIRST PUT DC VOLTAGE ONLY ONE  SEC. TO MAKE 1000 KICK  YOU  ASK YOU SELF HOW IS POSIBLE  I TELL YOU I SPOSIBLE AND THE SM  SAY COILS IN THE OPERATIONS  AND WIRES IMPORTANT NOTHIG ELSE BEALIVET ME I TEEL THE TRUE   I HAV MADE AND IS THE TRUE SIMPLE EXP.. IF YOU PUT THE DC V  OLTAGE  IN THE SIMP[LE  TRFO .  IN THE SECUNDARY COILS YOU GET ONLY ONE KICK   AND THAT IS THE EROR  HOW YOU WHILL MAKE OSCILATOR  YOU MAKE THE EROR  THE OSCILATORS MAKE SOME HZ  AND  THE OUT COILS  IS PRODUCED THE SAME OUT HZ  AND THAT IS EROR 
 THE POINT OF THIS IS YOU  TO INCRASE THE HZ  OR KICK  WHIT ONE KIC  AND IF YOU FIND HOW YOU CAN EASY ANDERSTEN D HOW IS POSIBLE  LOOK THE OLD PATENT AND OLD FORMULES YOU CAN FIND SOME   AND LOOKK AGAAIN THE VIDEOS  OF SM AND SEE 

@ mac

damm dude all i can say is damm good work

ha!

so  well

i will not say any more

@ mac i dont think you should post a vid  i think this should remain the hidden secreat why ?? when you get it  it will make you feel good!!

why give it to a bunch of people that have no desire to understand it??  they must learn as many have 

that is the sm way

Hi Macedonia CD,

Great to hear you found all this out! Sounds like you're a clever guy!
Maybe you are willing to tell us what patent you are refering to. That way you don't need to tell us anything but we can still work from there.

Hope to hear from you soon!

regards,

Robert

@all

Macedonia CD is an electronics engineer and TV repair man from Macedonia. He says he has built the above device and put in 2 watts and got 60 watts out. The ring in the middle is the collector and it is wound the same as the other 4 coils that surround it. He did not record the length of the wire on the coils, he just optimises the length according to the output it produces. The coils are all copper wire 1.6mm single strand, though I think he believes Litz would work, the windings are standard.

He is working with very basic equipment, an old oscilloscope with no readings, just a wave form and calibrated glass screen. His country is poor and research materials are very expensive.  It appears a decent modern scope would cost him about two years wages! This a great source of frustration for him, he is very creative, yet limited by his circumstances. He says there are many more like him who would like to invent and cannot for the same reasons.

He has many ideas and I have attached the documents and patents that he has been referring to recently, he has others which he uses too. He is also interested in the anti-gravity work of John Searle. The 'Rene-Rator' jpeg is a circuit that he really likes which was posted on the forum some time ago, I believe.

When speaking to him or reading his posts, CU means copper in his language, and he tends to us the letter HO when referring to coils. It is best to try and describe something with several different basic words when communicating with him. He is a bright guy and it is well worth the effort talking with him.

Acerzw

@tink

Mac's device is based on SM's words but is not meant to be a replication of the TPU, just another way to do the same thing.

@Macedonia CD

It would indeed be interesting to hear your ideas on the TPU Mac.

Acerzw

Hi MAC

Is it correct all 5 toroids are the same?
Also same number of CU turns for all toroids?

Is it correct that the collector toroid is **NOT** looping inside the 4 exciter toroids?
The collector toroid does not go through any of the 4 toroids, collector goes through none
of the 4 toroids.

Earl

Hi Earl,

I don't see why the collector would not go through the four control coils? Where do you base your question on? Am I missing something

regards

Robert

HI 
REPLI TO INOVATION
 LOOK  IS NOT A HAVE INDUCTIONS ON ATHER SAID OF MY 4 COILS
IS YES ROTATIONS COILS

I SEE DONT ANDERSTAN ME WEEL
SIMPLE MY PESIMIST  <<INOVATIONS >> IS LIKE YOU HAVE SMALL MAG PER.  HO MAKE  A TURNS  AROUND THE ATHER COILS HMMMM
YOU MAKE SIMPLE TEST  AND YOU WHILL SEE  THIS  OK
IF YOU READ SOME OF MAILS FROM SM  AND HI SAID  MAG WHIT  SPEED LIKE  SHOT GUN 
WHAT YOU THING IF YOU MOVE THIS SMALL MG WHIT THIS SPEED IN THE SIMPLE WIRE
HAAAA MORE WHATT
IS HAVE ANTHER WAY TO GET MORE PWER  YOU MAKE  TEST THIS
 YOU GET  SOME WIRE CU 12 INCH  LENGHT  AND MOVE  MAG  PER.  THIS WIRE PUT IN THE SCOPE IN LOW METRES AND SEE THE THERE
 YOU MOVE FIRST LEFT AND RIGHT
  YOU SEE THE SCOPE  IS GOING UP AND DOWN IS OK
  BUT WHAT IS HAPEND IF YOU MAKE MOVING MAG AROUND THIS WIRE  YOU SEE THE SCOPE  YOU SEE MUCH  VOLTAGE   WHIT THE SAME SPEED

THEN YOU SEE  A TEEL  WHAT YOU SEE
 ANTHER TIME I SAID TO YOU  WAY YOU ARE MAKE A MYSTAKE  YOU HAVE PUT  MORE ENERGY IN THIS COILS THAT IS WRONG  IF YOU ARE GOOD MATHEM OR ELKTRONICS MAN  YOU FIND THE WAY HOW YOU TO MAKE 4 COIL  TO PRODUCED  MORE  MAG FILD  WHIT VERY SMAL  ELECTRIC CURENT    8)THE POINT  IS THIS
SM WORDS <<< SMALL MAG  WHIT HIGH SPEED THAT IS THE ANSFER>>
SM WORDS <<<1000 PIECS OF WIRE  IS THE SAME OR SERILAL  OR PARALEL     LET SAY PARALEL  1000  LONG 12 INCHLENHT WHIT  SPEED  YOU IMAGEN THIS POWER 
 I >> I DONT SAY YOU ARE SAY THE INDUCTIONS  OF 4 COILS  THE MOVING FILD   
OHHH MY GOD THE SM  ALL TIME IS SAID THE TRUE
WHIT SOME SECRET WORDS

REPLY FOR THE ANTHER GUY <<TINK>>
FOR HOW IS WORK TPU 
I THING  THE SM IS MADE  2  OR 3 DIFERNTS  TPU
THE FIRST TPU  WHIT  ONE MAG IS  HO DONT WORK  UP SAID DOWN  IS LIKE THIS
LET SEE
  THE EARTH IS MOVING  LET SAY  IN THE LEFT SAID  OK  AND HIS FREK OF MOVING IS 7,3 HZ    THE SM SAID HIS DIVICES WORK 7,8 HZ  CLOUSE TO THE  EARTH  HZ 
 THE POI OF HOW IS START WHIT MAG  IF YOU HAVE 2 COILS  HO WHIL MAKE  ELKTRO MAGNET FILD  JUST A SECOND  AND COILS  IS CUT  IN NOT PARALEL NOT  SERIAL ATHER WAY  << PARALE  LIKE  X >  WHAT WHILL HAPEND  THE ONE COILS  IS MAKE  ELK. MAG FIL  THE ANTHER COIL MAKE ANTHER ELK MAG FILD  BUT THIS COILS IS MPUT IN THE  IRON METAL  AND THEN THE 1 COIL AND 2 COIL IS HIS POLES IS PUT IN THIS WAY  <<LIKE  N POLE TO N POLE  THE ATHER SAID  S POLE TO SPOLE >> THIS EFECTK IS LIKE YOU HAVE TWO MAG  AND YOU CAN PUT IN TOGETHER 
AND  TIS EFCT IS  POSIBILYTY TO MAKE SOME OSCILATION S IN THE SAME COILS  THIS SIMPLE PUSH  JUST SECOND  IS  GOOD TO START THE  OSCILATIONS AND WHEN IS OSCIOTAIONS BEGAIN  IN THE SAME COILS IS PRODUCED  THE INDUCTIONS OR SOME VOLTAGE  AND THIS VOLTAGE  IS HAVE ABLE TO PRODUCED AGAIN THE EL. MAG FIL   AND  THIS FILDS   S AND S  ...N AND AN  AGAING SAME PROCES 
WAY IS NOT WORK UP SAID DOWN  A SAID TWO FREKFENCY  THE SAME  HZ  IS GO TO 0  OSCILATIONS  THE MOVING OF EARTH  MUST BE THE SAME MOVING OF MAG  OF TPU
 ANTHER  THE MATERILASIS VERY IMPORTAT TO THIS TPU   
THE COIL 2  MUST BET PUT IN THE SPECIAL MATERIAL  HO HAVE ABLE TO MAKE  AND TRANSFER THE MAG FORCE  SO FAST   TO ATHE MATERIAL  HO IS ABLE TO CHARGE MAG  FILD HO HAVE SEND THE FIRS MATERIAL
  TRANSFER MATERIAL IS  ABLE FAST TO SEND  ELKTRO ,MAG FORCES TO ANTHER  MATERILAL   HO HA ABLE TO KEEP THIS MAG SOME SECOND
TRANSER FAST MATERIAL IS  <<< SOFT  IRON THIS MATERIAL IS SEND MAG FILD  BUT DONT  KEEPT  TO HIM MAG FILD  >> A MATERIL HO KEEP THE MAG FILD  SOME SECOND  IS   IRON SIMPLE .......
THIS IS THE VERY IMPORTANT MATERIALS TO MAKE PROCES   BEAGEN 
IF YOU HAVE 2 SAME MATERIAL  THE PROCES  WHILL NOT START  THE SAME MOMENT WHILL END  WHITT NO RESOLTS   IF YOU PUT 2 MATERILAS   ONE HO KEEPS THE MAG FILD  THE ANTHER  HO NOT KEEP THE MG FILD AND EASY TO TRANSFER  FAST  AND EASY CATCH THE MAG FILD THEN THE PROCES WHIL   START TO OSCILATION LIKE PERPETUMOBILE 
THE ATHER DIVICES  I MEAN LIKE 10 BULB  AND  800  SM TPU 
IS ANTHER
SM IS CREATING  ELTRO MOVING MAG FILD  WHIT HIGH SPEED  LIKE A SAID UP  PIC 16F
I SOON SEND TO SEE  THE  PIC OF MY TPU OR SOME THING ELSE
THANKS FOR READ OF MY
THANKS <<<<<< ROBERT  >>>>>>>  I SEE NOW THE MANS  IS INTERSTED FOR ME OF MY THINGS