Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Lords of the Ring 2  (Read 38450 times)

Thaelin

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 1093
Re: Lords of the Ring 2
« Reply #45 on: December 13, 2020, 09:34:36 AM »
GK:
    Thanks for returning with this. That damn torrid has troubled me for years. I know he gave out a lot of info that near got him landed in the joint. He was locked in a ND and a Threat  beyond measure. Once he found out they were never going to release it, he tried his best to tell stories and comments to convey how to do it. It lingers to this day here and other forums. All about the coils and how they interact with each other. One day, One day. Then it has to  be set free so the whole world can benefit from it.
Keep it comming for us and the world. I have had a few ideas and will pursue them.


Above all, GREAT to have you back again. Rock on.

MasterPlaster

  • Hero Member
  • *****
  • Posts: 530
Re: Lords of the Ring 2
« Reply #46 on: December 13, 2020, 11:30:43 AM »

@MasterPlaster: refresh my mind about the heat up. ......................
If this is not what you meant let me know.
The Heat problem is documented in:http://www.rexresearch.com/markstpu/markstpu.html
Thanks

lancaIV

  • elite_member
  • Hero Member
  • ******
  • Posts: 5233
Re: Lords of the Ring 2
« Reply #47 on: December 13, 2020, 12:36:38 PM »
Good Morning,
related #44 " heterodyning" I would use the principle from thermo-cryo-electro(iono-plasma) term :
                                                            reversible process

Sincere
OCWL


Magluvin

  • Hero Member
  • *****
  • Posts: 5884
Re: Lords of the Ring 2
« Reply #48 on: December 15, 2020, 01:39:48 AM »
Been looking over the circuit GK has presented on page 3.  The upper right portion of the circuit, in blue, seems to be isolated from the rest of the circuit other than the 1 wire leading down to Q3, and induction of the blue coil in the blue loop and then the single wire off of the one ended coil labeled 'center' to the 'snubber'?.  If the oscillator to the left in the circuit pulses the 2 turn primary, which seems to induce the blue loop winding, then with the diode D2, C1 would get charged, but seemingly no way that it is discharged. Once it is charged, that blue loop would no longer be doing anything for the circuit once c1 is fully charged.  I must be missing something. Q3 looks to be in a position to send current through the green FE wire from C1 to the neg of the source. But Im not seeing how C1 is able to do so via 1 wire from the blue loop circuit.
Mags

giantkiller

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 2791
    • http://www.planetary-engineering.com
Re: Lords of the Ring 2
« Reply #49 on: December 17, 2020, 05:47:41 AM »
That blue segment is the charge pump. The snubber circuit is an attempt to alleviate the spark gap that normally is there in many other charge pump ckts. I believe SM did this in a different way which he did not talk about.
The charge in the pump oscillates up like a resonant ringing. The field ramps up in volume to hit the center trigger coil.
I left this hanging as this is always the safe way to start at a distance. Then I can connect it fully to trigger the snubber to discharge the charge pump field.

With out the snubber there the FE still pickups. It is in parallel with the horizontals. The schematic doesnt make that clear but they are just like the cut tpus that SM did.
I had said this years ago that I was able to duplicate the individual pieces that SM stated whether clearly or by a misnomer.
I then said that hooking those pieces together is a rat's nest of choices and I played with those over the years.
The schematic is where I want all attempts to fit in that black box under the two center toroids.
This step blows things up at a slower rate now. Before, things just exploded and took equipment with it.
In using a step up ckt like a cfl or stungun I drove the primary, tanked the secondary/verticals and was able to light LEDS off of a bridge on the center toroids.
This was straight air core transformer of the verticals to the centers. But I proved that the air core worked but only because of the high voltage drive. The HVAC easily crossed the space.
I have kept stripping out the HV to get the charge pump up to transmit to the centers. The reason why this an obsession is because at this point where more and more of the stages can be interconnected in less a random sequence the device till is a little chaotic but definately self damaging.

The balance is get the charge pump voltage to cross the gap, dump the collapsing field into the FE wire, rectify the capture without causing damage to the components, reset the charge pump causing a large BEMF.

This is what I always knew was the last step. The collapse is the thumping. The rotating field is there as the flux moves along the horizontal plane of the device and the collapse travels around the ring.
The FE wire by itself is an antenna to the noise. With current circuit I have picked up 50v spikes on the centers.
I have increased the number of guarantees as:
1: The FE picks up at 90 degrees. I bridge that and LEDS always light.
2: The vertical to centers are air core transformer coupling.
3: The windings shown in the LTPU are very similar to the stungun charge pump circuit times 2. There are even bleeder resistors across the large caps and what look to be large diodes by them.
The large electrolytic caps were pushed off to the side making them look they did something else. The large yellow caps I believe are the large caps inside the charge pump.
The fuses are spark gaps. But they never light up in the videos. I have set neon starters up like that and then used jumper connections to connect them in and out of the circuit. So my device lights up.I just burned another circuit up hooking the verticals in serial with the inherent secondary of the oscillator stage of the charge pump. Of course that worked the 50VAC showed up in the centers.

SM stated they went through many TPUs to get it working. I am starting to think he was referring to circuits.
As a bottom line:
You can drive the outer primary and the centers will pickup from the secondaries.
You can drive the secondary directly to promote air core connection testing.
The FE wire is a tangible tap off point for power.
Cat juggling with feral rabid cats.The take away is by building the LTPU by what we can tangibly see and knowing how fields travel has gotten me to this stage where just interconnections can be made.

And some of those still reproduce the same thing.
I hope I haven't left anything out.
Building the smaller units only exposed a limited number of device artifacts that left a lot of builders wondering even more.
But I am having a field day with this build because it is so open to modifications.
I had done an audio test where I drove the verticals with 48 volts of 3hz. The needle on the SWR swayed back and forth at a 6 foot distance.
I am at a fork now where I make a choice of using larger TV parts or guitar reverb circuit.

forest

  • Hero Member
  • *****
  • Posts: 4076
Re: Lords of the Ring 2
« Reply #50 on: December 17, 2020, 12:03:27 PM »
Well....excuse me but as I become older I prefer simpler explanations.So what is the principle , can you explain schematic in parts ? Charge pump and magnetic field collapse into the FE rod do not disturb charge pump ?
Actually I planned to use such method to generate excess heat in shorted FE pipe.I remember there was video from russian fellow about some "magical" transformer being a pipe constructed by glued ferrite rings and secondary being FE nail

giantkiller

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 2791
    • http://www.planetary-engineering.com
Re: Lords of the Ring 2
« Reply #51 on: December 26, 2020, 02:28:09 AM »
When the charge pump finishes building the field crosses the gap between the ring verticals and the center toroid verticals, the discharge trigger enables the charge dump into the FE.
I refer to the previous video post of the field expansion.
I did add a tank circuit below the collector of the q3 and above d3 that matches the oscillator frequency so that the d3 did not discharge the pump.


The harmony of the system starts with the air gap. The drive power sets the timing in the air gap crossover. SM mentioned a frequency of 5k which is coincidently the most stun gun oscillations.
The crossover timing has to agree with the harmonic reflections in the system.
Follow Tesla coil testing with the test equipment by not connecting to device. I use an EM meter and SWR meter. Those fuses in the back are for testing also. I have connected them at places where I though SM would have used the empty tabs on the center toroid box.
The snubber acts like a non destructive spark gap.
The oscillator of the system is an Armstrong oscillator configured as an air core High Q multiplier. This is it in a nutshell.

When everything is hooked up then play with the drive current. Two frequencies can be used to enable the triggering with the heterodyned outcome.
Place a small neodyn on the FE. I use the little ball as it is light and will respond anywhere on the FE.
The magnetic field does not hold well with out drive. It also prefers to remain stable in the event of an in field disruption. The internal spark gap of a stun gun is amplified by the field in the charge pump and the secondary inductance. Telsa goes through extreme measures to get a capacitance in the surrounding field. That way there is no device to breakdown under the high orders of charge held. In the TPU SM gives warnings.

giantkiller

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 2791
    • http://www.planetary-engineering.com
Re: Lords of the Ring 2
« Reply #52 on: December 30, 2020, 05:22:52 PM »

giantkiller

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 2791
    • http://www.planetary-engineering.com
Re: Lords of the Ring 2
« Reply #53 on: April 21, 2021, 02:27:00 AM »
I thought this might open some minds...

giantkiller

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 2791
    • http://www.planetary-engineering.com
Re: Lords of the Ring 2
« Reply #54 on: April 22, 2021, 05:15:19 PM »
https://www.nuenergy.org/nikola-tesla-radiant-energy-system/
Quote
Energy Directly from the Atom
The radiant energy system is a self-oscillating capacitive system. Once it is set into oscillation, very little power is expended in keeping it going. Because it is an electrostatic oscillating system, only a small amount of charge moves through the system per cycle, that is, the coulomb per seconds = amps are low. If the charge is used at a low rate, the energy stored in the system will be turned into heat at a slow rate enabling the oscillations to continue for a long period of time.Tesla’s “COIL FOR ELECTRO MAGNETS,” patent #512,340 is a very special coil design because, unlike an ordinary coil made by turning wire on a tube form, this one uses two wires laid next to each other on a form but with the end of the first one connected to the beginning of the second one. In this patent Tesla explains that the double coil will store many times the energy of a conventional coil.[1] Measurements of two coils of the same size and with the same number of turns, one with a single, the other with a bifilar winding, show differences in voltage gain. These bifilar Tesla’s coils can be explained solely on the basis of their electrical activity. A bifilar coil is capable of holding more charge than a single wound coil. When operated at resonance, the distributed capacitance of the bifilar coil is able to overcome the counter – electromotive force (e.m.f.) normal to coils, inductive reactance.
Because of the electrical activity, a bifilar coil does not work against itself in the form of a counter – e.m.f., the potential across the coil quickly builds to a high value. The difference between the turns becomes great enough that the energy is practically all potential, at this point, the system becomes an electrostatic oscillator.
Minimal work is done in my radiant energy system due to the absence of wasted displacement currents. As small heat losses occur, oscillations are maintained by surplus charge generated by atomic catalytic reactions, energy is siphoned from the kinetic moments of these charges. Very low energy expenditure allows power delivery to an electrical load over an extended time period without an external fuel supply. After an initial input of energy from an outside source, the radiant energy electrical generator will operate as a very efficient device.
By reviewing history it is understandable why some inventions are not commercialized. It is economics, not science, that is the main factor. It will be remembered that alternating current was opposed by powerful financiers in Tesla’s time.
Michael Pupin, noted in his autobiography:
“…captains of industry…who were afraid that they would have to scrap some of their direct current apparatus and the plants for manufacturing it, if the alternating current system received any support. A most un-American attitude…but ignorance and false notions prevailed in the early nineties, because the captains of electrical industries paid small attention to highly trained scientists.”[2]

It takes very little energy to promote a resonant field.The charge pump is the heart of microwave ovens, analog tv, automotive ignition systems. and stun guns. SM even promoted the exploding TV as an accelerating charge pump of vast amounts of energy. The main problem with the exploding T.V. circuit was there were no components in place to dump the collapsing field to ground. Sm stated 'There can be no ground in the TPU.'
I promoted setting a charge pump of a 20 foot diameter next to an airport. He emphatically stated 'No'. I got his attention.
Application of the High Q multiplier circuit merged with the charge pump circuit is the TPU schematic yet no one tries this.
The field in the charge pump(the large vertical windings) builds and crosses the space to the center toroid triggering a field collapse into the middle FE loop. This creates a one way magnetic diode. Does anyone catch this? The original promotion was '90 degree coupling'.
I am the only one who has spent years showing the subsections of this circuit without conjecture from the greats, Ion, Marco, SM, Erfinder and the others that left immediately after I exposed the charge pump as an integral part of the device. The last statement made to me by Moab was 'Put a diode in it!'. Configuration proof.
I even built the large TPU in accordance with what we have seen and proved the configuration works as a charge pump replicating the field size and strength promoted in the exploding TV. I even EMPd 5 cable routers throughout the last neighborhood I lived in. More proof. The energy is there.
Final answer is and for the new members that are eager the schematics are in my previous posts across OverUnityResearch and OverUnity. They are out of sequence.
Exact copy of TPU is the LTPU build using twin lead outer wrapping. The device is staring everyone right in the face. Build that model with the large vertical air core as part of the charge pump and one will see the field strength meter show the energy. What is the final standalone device? You will see it when you start blowing shat up. The largest TPU is the Alcubierre device. Another example in our faces. Yet people want destructive propulsive detonations or free demos.
I know there are watchers that want the final answer handed them so they can self promote themselves into history. Marco warned me about this and now I have to watch this action unfold.
I am not into this for followers or fame. From the smallest to the largest devices there are many examples of the technology out there so one can not really be the hero.It is the High Q multiplier circuit merged with a charge pump, i.e. the exploding T.V.There it is, schematics and demonstrations. The trolls, weasels and prairie dogs finally have what they have been searching for...

giantkiller

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 2791
    • http://www.planetary-engineering.com
Re: Lords of the Ring 2
« Reply #55 on: April 22, 2021, 10:27:51 PM »
Because the TPU is an inert device it can be conspicuously housed in an inconspicuous housing.
This then can be transferred across borders relatively easy and dispersed to objective points.
Any information divulged past what has been could be deemed as a national security threat.
Its simply a charge pump...

giantkiller

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 2791
    • http://www.planetary-engineering.com
Re: Lords of the Ring 2
« Reply #56 on: April 25, 2021, 07:42:13 PM »
Further on...The resonant charge pump exists in a lot of places

giantkiller

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 2791
    • http://www.planetary-engineering.com
Re: Lords of the Ring 2
« Reply #57 on: May 12, 2022, 01:30:49 AM »
SM swiped the sides of the LTPU with a magnet and he dropped a magnet in the open TPUs to excite the Armstrong oscillator into action.
Since SM was an audio engineer I took the audio approach and found a single channel TDA2003 worked quite passively with a 9 volt battery.
Here is the video to show this.
The Q-Multiplier represents a magnetic version.The LTPU was polyphonic whereas the other smaller TPUs were monophonic.
By using speakers I achieved a self resonant, dynamically variable inductor.Cheers.

http://youtu.be/8zEhnRv4SN8
« Last Edit: May 12, 2022, 07:00:03 AM by giantkiller »

giantkiller

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 2791
    • http://www.planetary-engineering.com
Re: Lords of the Ring 2
« Reply #58 on: May 12, 2022, 07:01:14 AM »
There is not much time left.

giantkiller

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 2791
    • http://www.planetary-engineering.com
Re: Lords of the Ring 2
« Reply #59 on: May 12, 2022, 07:08:31 PM »
Been looking over the circuit GK has presented on page 3.  The upper right portion of the circuit, in blue, seems to be isolated from the rest of the circuit other than the 1 wire leading down to Q3, and induction of the blue coil in the blue loop and then the single wire off of the one ended coil labeled 'center' to the 'snubber'?.  If the oscillator to the left in the circuit pulses the 2 turn primary, which seems to induce the blue loop winding, then with the diode D2, C1 would get charged, but seemingly no way that it is discharged. Once it is charged, that blue loop would no longer be doing anything for the circuit once c1 is fully charged.  I must be missing something. Q3 looks to be in a position to send current through the green FE wire from C1 to the neg of the source. But Im not seeing how C1 is able to do so via 1 wire from the blue loop circuit.
Mags
The circuit is missing the spark gap components in the blue loop.

This was part of the dissemination at that point in time. No complete schematic and no demos.
With my last post comes another integration step.The 'tuning', if that is what the necessary term is, constitutes minor configuration changes to produce the harmonics to capture.
The snubbing is the capture of sorts. It limits the self destruction as SM stated was necessary.
There is one more step where the configuration is a small charge pump(the little hidden circuits in the TPUS) fed into a larger charge pump(the obvious large visual configuration(ring) of the TPUs).
The thumping is where the snubber executes, the collapse feeds a discharge. In all the TPU demos we ave no access to a time domain to dissect the harmonic charge executing a spark gap discharge via the snubber. It happens all too quickly. But because SM demo'd a large white discharge at arm's length we can be assured that there are spark gaps incorporated. Sm even mentioned that blown glass fuses make excellent gaps.
I was always intrigued that 1: we never saw the back end of the LTPU to see the one fuse sparking and 2) he has two fuse holders but only one one fuse in place. I contend he was exposing that the two sides(top and bottom) were at some point mixed. But we see two large supposedly power filtering caps inside the ring each with bleeder resistors. They fit well as either power supply or charge pump fixtures.

This last configuration component is where the power comes from. A warning of danger is needed here.


I hope this helps. Steven Marks is the only old head possibly still alive so the trail has been lost and those people and families are safe from any implication.