Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Overunity perpetual motion motor magnets  (Read 66294 times)

FreeEnergy

  • Hero Member
  • *****
  • Posts: 2014
    • The Freedom Cell Network
Overunity perpetual motion motor magnets
« on: September 07, 2007, 10:02:10 AM »
not sure if this was posted but here you go :)

http://www.youtube.com/watch?v=T41_fkVfFNI


Freezer

  • Sr. Member
  • ****
  • Posts: 414
Re: Overunity perpetual motion motor magnets
« Reply #1 on: September 07, 2007, 08:20:34 PM »
I believe this was posted, but it doesn't really work.  He starts the device at the beginning of the track where there is no pull-back from a magnetic track in front, as would be in a loop.

Here's his other one.
http://www.youtube.com/watch?v=Ch9X0KqQP5o&mode=related&search=

Kinda similar to this v setup, but who knows if its perfectly level.

http://www.youtube.com/watch?v=SyQ5--E6LAk&mode=related&search=

Thaelin

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 1093
Re: Overunity perpetual motion motor magnets
« Reply #2 on: September 10, 2007, 05:02:49 AM »
     Is off topic but sure would like to know the music in the background.

thaelin

Brian Leonard Marshall

  • Newbie
  • *
  • Posts: 6
Re: Overunity perpetual motion motor magnets
« Reply #3 on: September 12, 2007, 03:25:44 AM »
Hi All,
I have just joined in response to a comment on Youtube.

I will have the motors available in 2008.
I uploaded a video to Youtube some days ago, of the first mock up to test one set of magnets. These are a set in a bundle not one magnet, as I bend the gauze that is wavering between either flipping one way or the other, in this way I can divert the gauze in any directing by a trigger magnet that nudges the main bank to repel the opposing pole that would normally attract. This achieves 60 mounds of thrust for 120 mm and the rotor is drawn into the next set. In the mock up I use one set for the demonstration as it is obvious the slight resistance to bring into the power position is between zero and 3 pounds depending on where I set it. For experimental purposes only, I set it at 1 then 2 then 3 pounds as the output increases exponentially.

I will do another Video today with a close up of the scale.
 
Business wise I will be inviting investors in 2008. First I have to order a 2500 KVA generator from China and I set it up in the machine shop with the unit generating power into the grid.
In Australia the return is around 4 cents per kilowatt hour, I expect 100 dollars per hour per hour return per unit.
I will only enter into a partnership with individuals or groups, and they will have to sign a non discloser agreement and become shareholders in each venture, which is to supply power into the grid.  This means the group can then on sell the same to investors in a pyramid structure where all can share in the expansion of the product.
Any investor or group can in turn invite investors in their own down line. They can do the same and in this way anyone who joins at the top level can share in all future expansion with a small percentage down the line as their line of investors grow.  This way, all can share and prosper. This way anyone big or small investor can participate.  This is the only way I will do it, and this protects the device via design rather than patent if the governments refuse a World Patent. 
Thus far I have attempted to patent it here in Australia, however the Australian Patent Office declares it is impossible, and will not consider it point blank.
Governments do not want over unity period.
All details are on CAD programs and can be easily duplicated anywhere in the industrial world.
Naturally I have taken steps to dump these into the public domain if it is necessary. All plans and manufacture procedures are safely stored away so no action against me can prevent public disclosure if the conditions warrant it.
The power is derived from a new understanding of the Fibonacci effect.
Regards Brian Leonard Golightly Marshall.

hansvonlieven

  • elite_member
  • Hero Member
  • ******
  • Posts: 2558
    • Keelytech
Re: Overunity perpetual motion motor magnets
« Reply #4 on: September 12, 2007, 04:27:06 AM »
G'day all,

And where can we find this video of yours on Youtube Mr. Brian Leonard Golightly Marshall ?

Pity you don't mention that. I would love to see the Fibonacci effect. Would make a welcome change from Aether, Moebiusstrips, Lead out theory and all that boring old stuff.

Hans von Lieven

Brian Leonard Marshall

  • Newbie
  • *
  • Posts: 6
Re: Overunity perpetual motion motor magnets
« Reply #5 on: September 12, 2007, 08:39:52 AM »
http://www.youtube.com/watch?v=ZI4NDrPQ2rA
and
http://www.youtube.com/watch?v=Xs_pszg03f8

I was asked to post a Youtube url, the first is the original the second is the scale to show the power on one magnet arrangement.

I built this unit in March as a test bed and kept it as is for posterity, since then the stainless steel unit is in production. Once Ihave it set up on a generator and hooked to the grid I will show another video.

Cheers  Brian Leonard Golightly Marshall

hansvonlieven

  • elite_member
  • Hero Member
  • ******
  • Posts: 2558
    • Keelytech
Re: Overunity perpetual motion motor magnets
« Reply #6 on: September 12, 2007, 01:29:47 PM »
G'day Brian

Thanks for sharing this with us, Keep us posted

Hans von Lieven

Brian Leonard Marshall

  • Newbie
  • *
  • Posts: 6
Re: Overunity perpetual motion motor magnets
« Reply #7 on: September 13, 2007, 07:01:05 AM »
Thanks Hans,
as you would understand, this is the break through, its based on the Fibonacci rotation of gauze within the magnet.

Harold Johnson and Joe Newman independently had the idea some years ago.
I spoke to Mr. Newman in 2002 and he told me he was of the opinion it was to do with the Fibonacci, a I had my own idea how to track that same motion, I expected to be able to tap is like a continuous flowing magnetic spiral, I imagined it as a river of sorts and somehow there had to be a way of inserting a paddle so to speak, not so easy to do however.

Then Harold Johnson demonstrated it on a computer program and that led me to discover a way to switch the flow, a diversion for a moment then flow with it, so I finally cracked it.

There are other over unity motors, the Perendev for one, problem is no power and he wants a fortune for a small set up of 25 KV, what the world needs is power at  a low cost for the unit. 

My design enables a system of a long shaft 3 inch diameter and stack the Stator housing side by side for as many as desired, then move the rotor stack into the stator stack with a worm drive actuator.

This way the design can stack 100mm per motor therefore adding to it for as much HP as required and not have to worry about dividing the perimeter into 3 parts as Johnson had done. 110 deg 115 then 120 I don?t have that phase problem.

As always research and development money is tight, I wanted to solve future problems before I invested and allow for a much bigger machine several meters diameter.  The aim was to keep the rpm down and a high speed at the magnet face, I have devoted a great deal of thought to solve the problem before building it and it is now scheduled for August 8th 2008.

Regards Brian.

Honk

  • Sr. Member
  • ****
  • Posts: 497
Re: Overunity perpetual motion motor magnets
« Reply #8 on: September 13, 2007, 05:36:39 PM »
There are other over unity motors, the Perendev for one, problem is no power and he wants a fortune for a small set up of 25 KV, what the world needs is power at  a low cost for the unit. 
Regards Brian.

And where did you get the idea that the Perendev magnet motor is really working?
Show me any real proof that supports your statement.
And by "proof" I don't mean your own assumptions. Show us real hard conclusive facts!!!

acp

  • Full Member
  • ***
  • Posts: 178
Re: Overunity perpetual motion motor magnets
« Reply #9 on: September 13, 2007, 05:58:47 PM »
Perendev is like many others out there.. Promises for years on end... always looking for new "investors" ...  cancelled demos.... always going to have production units ready by the end of the year.... etc. etc..  blah blah...

By the way, look at what perendev is now pushing......

http://www.perendev-power.com/health_g.htm

cchance

  • Newbie
  • *
  • Posts: 12
Re: Overunity perpetual motion motor magnets
« Reply #10 on: September 13, 2007, 06:25:22 PM »
if what the world needs is a cheap source of free energy, then why not opensource the design?

Honk

  • Sr. Member
  • ****
  • Posts: 497
Re: Overunity perpetual motion motor magnets
« Reply #11 on: September 13, 2007, 06:31:20 PM »
By the way, look at what perendev is now pushing......
http://www.perendev-power.com/health_g.htm

This is real a scam alert and the final nail in the coffin for Perendev.
Any company involved in "free energy" while trying to push health rings,
pyramid power and similar crap is to be considered not trustworthy.

There is no real pictures of their magnet motor system, just drawings.
And they still use the many years old video for download. 
If they really had a working system they would of course make a new convincing
video to boost sales. By now they just look corny.

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: Overunity perpetual motion motor magnets
« Reply #12 on: September 13, 2007, 08:22:33 PM »
The only thing Perendev is selling is vapourware !

Don?t ever put any money into this company !

I don?t understand, why Switzerland?s Netjournal has featured Perendev so much
without at least seeing any prototype...
They probably have fallen for Brady?s "vapourware" stories as had Sterling D. Allan before...

Brian Leonard Marshall

  • Newbie
  • *
  • Posts: 6
Re: Overunity perpetual motion motor magnets
« Reply #13 on: September 14, 2007, 01:43:50 AM »
Hi all,
Yes Perendev is a scam, on behalf of a friend of mine, I sent in the paperwork to become the distributor in Australia, he wanted 10,000 EU and then said that he could not supply a unit until June, I replied we were only interested if I could fly to his factory, see a working unit, have it placed on a ship and then the payment would be released, No reply to that question.

He had also said the price was going up due to the magnet suppliers hike in price. At that point he was quoting 65,000 Euro.

He had said he had orders for 60,000 units and could sell for me 1000 per month, we were to set up a factory in Australia and start manufacturing. He added a company in Austria was going into production and would be supplying in June.

I spoke to Brady on the phone and he told me he had 1000 emails a day from people wanting the 25 KV unit. I also had him quote me for a 1000 KVA unit and the price was 4.5 million Euros.

I sent the papers to the address on the application and they came back, had been opened and marked not at that address. Overall it was to make sure my friend was not ripped off, and ironically was the reason why I looked into the over unity design myself.

Since then I have had a woman who I had met 3 years ago at an options seminar,  contacted me. She wanted to come to my house and have a chat about how I was doing with the options?  I told her it was pointless as I had not bothered with it, as it was a scam. She replied and still wanted to get together, I replied fine come for dinner. She did and spoke most of the night about options, stocks and showed various charts. As the evening drew to a close she started on about my magnetic over unity design and I should register with Col Tom Bearden. She said via the web site it linked to a group that had been established to make sure new over unity designs made it to market  as there was 16,000 scientists and investors determined to get any genuine over unity design off the ground, offering protection for the design and had mega dollars to invest.

Bearden was a Colonel in the Pentagon for 30 years, it is the Pentagon that puts a stop to anything that might endanger the oil business, and Bearden must be yet another front to stop development. He being a colonel would be tied up with the secrecy act and could never do anything contrary to the Pentagon.

So the point is, how did this woman know I was developing a magnetic drive, she also added that like my design Col Bearden was working on the switching of polarities to reverse normal like pole repelling and unlike poles attracting, which was at that point in time, only known to myself and defiantly not public knowledge.  She had to have been sent to spy out what I had been up to therefore was my phone bugged, was my emails monitored and therefore was there a real concern that what I had achieved was genuine otherwise why bother at all?

I had to assume it was because she had been sent, and yet had no way of knowing I was developing it, therefore it was obvious it was known to these covert groups and as such forced me to go public before I had intended.
She added that they wanted the technology protected in the event I would be killed and the technology die with me. Was that a death threat?

Putting all the facts together, this woman had talked to me at an optionetic seminar when I got up for a coffee, she befriended me, then 3 years later contacted me to talk options, then without the slightest mention by me, she starts on about the motor I had designed suggesting the Tom Bearden people. She had with her various magnetic patents to show me.
For this reason I have sent the design to various manufacturers all over the world with pieces of the design and with one phone call can bring them all together and have it go free to the world.

Cheers

tinu

  • Hero Member
  • *****
  • Posts: 630
Re: Overunity perpetual motion motor magnets
« Reply #14 on: September 14, 2007, 11:37:57 AM »
Hi Brian,

I?d like to say that I appreciate a lot your experiments. The videos are very convincing. At one point you mention something like ?you?d understand it if you were a physicist? or something very close to it. Well, I have to say that I understand it, but hopefully you can provide some more details. That?s because my understanding is quite limited so far (I hope it is actually completely wrong) and it would be resumed in a way that probably does not fit your understanding and our expectations for free energy.
Here it is: indubitably, there is a much larger torque in one direction that in the other direction of rotation. You prove it beyond any question. However, this is a similar behavior with that of any mechanical sprocket. When rotated in one direction it will go almost freely; the other direction will resist up to its failure. (There are more similarities though, like the energy stored in the sprocket spring/ magnetic field, which at one point is delivered back to the shaft, but these are mere details). The main problem is that I can not see any energy gain here.
Can you explain it?

Tx,
Tinu