Author Topic: Chas Campbell free power motor (Read 725178 times)

Pirate88179 · « **Reply #885 on:** September 24, 2007, 12:38:53 AM »

P-Motion:

You have hit upon something I have always been thinking about. When you place two strong magnets in repulsion, it takes "energy" or "power" to keep them there. So, I am wondering when you lock two magnets securly in repulsion, (spaced apart) since it takes energy to do this, is any energy being given off in some way we don't understand? Has anyone tried passing a coil through a repulsed magnetic field to see what, if any, energy output might be? This is the kind of stuff that keeps me awake at night. I can't speak to my local friends about this sort of thing, they think I am nuts, which is entirely possible of course.

Bill

hansvonlieven · « **Reply #886 on:** September 24, 2007, 12:46:44 AM »

G'day all,

You mean something like this??

Hans von Lieven

OldInventor · « **Reply #887 on:** September 26, 2007, 03:23:52 AM »

But what about Charles Cambell? This is all talking on mangets!

Ergo · « **Reply #888 on:** September 26, 2007, 04:38:36 PM »

Summing it up, it looks like old Cambell did not have any free energy after all.
As always the inventor doesn't have the will or skill to test his inventions, using reliable and recognized test methods.
After spending many years developing and feeling like he's hit a gold mine it can be hard to face the real truth.
This is one of many reasons of why these home built OU inventions never get tested properly. They are scared to hear the verdict.

hansvonlieven · « **Reply #889 on:** September 26, 2007, 09:24:21 PM »

Sorry P-motion,

The device you are talking about is bobmaries motor, not Campbells. Chas does not use compressed air.
Apart from that your analysis is correct.

Hans von Lieven

ashtweth_nihilisti · « **Reply #890 on:** September 27, 2007, 05:20:02 AM »

Guys friend sent me this off list,

First you crank the wheel with a huge crank and get it going about 10 rpm's? Then you open the gate and let the cylinders start falling into the channel. You keep cranking as best you can until the momentum takes over with the cylinders traveling uphill from the thrust. The small wheel has spring rods in case there happens to be a cylinder coming in at the same time the rod

zero · « **Reply #891 on:** September 27, 2007, 05:56:13 AM »

the picture will not display in full - even when trying to download it.
only the top section appears.

please try again.. thx

(and or forward a copy to: xiaou2@hotmail.com)

Jason · « **Reply #892 on:** September 27, 2007, 07:20:38 AM »

Hello Ashtweth,

I removed the picture, we do not need two. Jason

ashtweth_nihilisti · « **Reply #893 on:** September 27, 2007, 07:32:20 AM »

Original re posted, Have also forwarded to Chas.

sevich · « **Reply #894 on:** September 29, 2007, 06:18:18 AM »

hi to all

How did it come to this 61 pages and no working wheel

How did this "Chas Campbell" wheel get through the Australian TV broadcasting as proof of O/U

....it was working while it was being filmed !!

When I asked Ash to verify that the "gravity wheel" rotates on it's own without the rest of the electrics I recieved a reply but not as an answer to my question....why

@ Ashtweth / epi

please don't take this the wrong was but I've come to the conclusion that there could be other disturbing posibilities regarding your "hurried" involvment with Chas and his wheel.

your frenzied advertising and expansion of your "panacia" website during this Chas Campbell gravity wheel saga was nothing more than "forceful spoonfeeding" .......exerting / FLOGING maximum exposure for your website "panacia"

It's posible that Chas' wheel won't work now due to you purposely fiddeling with it so thereby keeping the real PM movement secret for yourself until such time

.....seeing that Chas is pretty old and frail. He would'nt know what you were even doing behind the scenes anyway

It's possible you were purposely ignoring forum members requests including Stefans for the type of testing that was required

God....this is just one big shocking mess

Ash, maybe I'm wrong with all my assumptions.....but what are we to think

.....I look at it from this point of view....."HOW CAN A COMPANY DRILLING FOR GOLD STRIKE 80 % GOLD @ 60 FEET BELOW, OVER AN AREA OF 20 SQUARE MILES AND THEN TELL SHAREHOLDERS THAT TEST RESULTS WERE A MISUNDERSTANDING"

you have to wonder what the board of directors were doing behind closed doors for 6 hours

LOL

sevich · « **Reply #895 on:** September 29, 2007, 08:21:07 AM »

Quote

Did you miss the part where Arsetwitch admitted to Stefan that Charles had faked the gravity wheel demo on that video by hooking it up to his electric motor contraption "just for show"? It was buried deep and Humbugger brought it out...

What I don't understand is how Stefan and others can continue fanning the embers of hope in Charles' fake devices at this point and not lose immense credibility. I mean, look what the headline news is here on this site: "Chas Campbell Video here now! Blah blah blah". It gets to be pretty obvious that Stefan and Arsetwitch are in it to promote their own website hits and not much more.

I must of missed it, but if it's true that the demo was faked, then why did'nt Stefan react to it by taking stringent measures ? ....could be that temptation can far out weigh common sense regarding increased hits on this forum ? Hey! .. I can fully understand the temptation.

......I bet you'd do the same if it were putting food on your table (I say what people don't know wont hurt them) ...

FreeEnergy · « **Reply #896 on:** September 29, 2007, 11:26:27 PM »

what the hell happen to this thread?

moving on...

peace

shruggedatlas · « **Reply #897 on:** September 29, 2007, 11:33:09 PM »

Quote from: sevich on September 29, 2007, 06:18:18 AM

hi to all

@ Ashtweth / epi

please don't take this the wrong was but I've come to the conclusion that there could be other disturbing posibilities regarding your "hurried" involvment with Chas and his wheel.

your frenzied advertising and expansion of your "panacia" website during this Chas Campbell gravity wheel saga was nothing more than "forceful spoonfeeding" .......exerting / FLOGING maximum exposure for your website "panacia"

It's posible that Chas' wheel won't work now due to you purposely fiddeling with it so thereby keeping the real PM movement secret for yourself until such time .....seeing that Chas is pretty old and frail. He would'nt know what you were even doing behind the scenes anyway

It's possible you were purposely ignoring forum members requests including Stefans for the type of testing that was required

God....this is just one big shocking mess

The irony is awesome. Someone is accusing Ash of being an OIL MAN!

mapsrg · « **Reply #898 on:** September 29, 2007, 11:33:49 PM »

Can the original post be marked to mention that it was an unsuccessful outcome.....it is getting alote of attention ................

ashtweth_nihilisti · « **Reply #899 on:** September 30, 2007, 05:18:49 AM »

Quote from: sevich on September 29, 2007, 06:18:18 AM

hi to all

How did it come to this 61 pages and no working wheel

How did this "Chas Campbell" wheel get through the Australian TV broadcasting as proof of O/U ....it was working while it was being filmed !!

When I asked Ash to verify that the "gravity wheel" rotates on it's own without the rest of the electrics I recieved a reply but not as an answer to my question....why

@ Ashtweth / epi

please don't take this the wrong was but I've come to the conclusion that there could be other disturbing posibilities regarding your "hurried" involvment with Chas and his wheel.

your frenzied advertising and expansion of your "panacia" website during this Chas Campbell gravity wheel saga was nothing more than "forceful spoonfeeding" .......exerting / FLOGING maximum exposure for your website "panacia"

It's posible that Chas' wheel won't work now due to you purposely fiddeling with it so thereby keeping the real PM movement secret for yourself until such time .....seeing that Chas is pretty old and frail. He would'nt know what you were even doing behind the scenes anyway

It's possible you were purposely ignoring forum members requests including Stefans for the type of testing that was required

God....this is just one big shocking mess

Ash, maybe I'm wrong with all my assumptions.....but what are we to think .....I look at it from this point of view....."HOW CAN A COMPANY DRILLING FOR GOLD STRIKE 80 % GOLD @ 60 FEET BELOW, OVER AN AREA OF 20 SQUARE MILES AND THEN TELL SHAREHOLDERS THAT TEST RESULTS WERE A MISUNDERSTANDING"

you have to wonder what the board of directors were doing behind closed doors for 6 hours

LOL

Sevich it seems i was wrong about you mate. Your out of the game mate. No second chances you should know that by now, sober up mate, i have no need to address that, it is utter mental frustration, elervating your self from defaming others will leave you emtpy in life .

Ill tell you what happened to this thread lack of moderation and people venting their frustrations out, we went in and got the infomraiton to allow replication and published our results.

Plus stated that We feel his Gravity wheel needs more attension and if people granted us we would give it to Chas as he would release any of his reuslts open sourced. If you dont like that, i coulodnt give two F$$Ks

We also published that his Motor Gen isnt OU at this stage, but published more data which could be applyed to it and used the publicity in some of our presentations to put forth more pressing issues, plus have shown the answer to aviud this in the future. A proposed Granted center for these technolgies.

Plus we use this altrusitic gesture and applyed it to other areas. We build by the way, dont sit on the internet and apply USELESS maths or skepticism, and or bitch useless drivel.

It seems these threads are filled with un moderated frustrations,.

If you want information and to see the out come, plus aquire any more infomraiton on chas's Device just visit the panacea page.
I wont be frequenting here tilll Humbugger is removed.

News:

User Menu

Author Topic: Chas Campbell free power motor (Read 725178 times)

Pirate88179

Re: Chas Campbell free power motor

hansvonlieven

Re: Chas Campbell free power motor

OldInventor

Re: Chas Campbell free power motor

Ergo

Re: Chas Campbell free power motor

hansvonlieven

Re: Chas Campbell free power motor

ashtweth_nihilisti

Re: Chas Campbell free power motor

zero

Re: Chas Campbell free power motor

Jason

Re: Chas Campbell free power motor

ashtweth_nihilisti

Re: Chas Campbell free power motor

sevich

Re: Chas Campbell free power motor

sevich

Re: Chas Campbell free power motor

FreeEnergy

Re: Chas Campbell free power motor

shruggedatlas

Re: Chas Campbell free power motor

mapsrg

Re: Chas Campbell free power motor

ashtweth_nihilisti

Re: Chas Campbell free power motor