Author Topic: Chas Campbell free power motor (Read 724984 times)

ashtweth_nihilisti · « **Reply #60 on:** July 09, 2007, 03:18:20 AM »

Latest from Chas

Thanks for all the nice things you have said about me I will try to not let you down and would you please let all those who have contacted me with encouragement especially the man from Mexico who sent me a note -book and cards please tell them as soon as possible I will release all details on the net for the world to see , -chas

d3adp00l · « **Reply #61 on:** July 09, 2007, 05:20:07 AM »

Sorry guys but I am losing faith by the second. I have seen all this before. Big hype, but when actually confronted by serious people (with moderate funds) everything is hush hush, but when they are trying to talk to big money everything works great. I was hopeful when I first heard of this, but I have seen the "I will disclose everything soon..." . I will keep an eye on the posts, and hope it doesn't go as the others did.

Dingus Mungus · « **Reply #62 on:** July 10, 2007, 08:43:46 AM »

I'm still waiting for a CoP calculation before I give up on this thread.
I just hope Chas is willing to take the measurements needed...

~Dingus Mungus

ashtweth_nihilisti · « **Reply #63 on:** July 10, 2007, 10:06:15 AM »

Guys i know how frustrating it is, but this guy genuinely wants to give it away, so we need to be patient. I have no reason to doubt , its just he is not like us, he doesent know how critical the whole scene is,

he doesn't even know what over unity is

$:-\$

so, He found the right person (me) as we have show on his page (with the help of Earl, Patrick etc)

Now here is the latest measurement technique i will be working on trying on his set up.

Posted by Earl

that is why you put the following in series:

FWBR -> digital ampmeter -> analog ampmeter -> lightbulb(s)

In parallel to the lamp(s)
one digital voltmeter
one analog voltmeter

At the output of the FWBR a big electrolytic capacitor (with voltage
breakdown reserve)to smooth out ripple and make DC.

At the inverter input do the same thing using both analog and digital
meters simultaneously.You can use an ampmeter at the battery, but measure voltage right at the inverter,otherwise the wires between battery and inverter could (WILL !) drop the
voltage.

Regards, Earl

Dingus Mungus · « **Reply #64 on:** July 10, 2007, 10:19:51 AM »

Standard multimeters won't help me... The problem is this device could be a large ramp up flywheel that stores up energy before he applies a load. I was hoping for a killowatt test so that you could prove the taken energy outweighs the total running energy.

It's a pretty important experiment to get out of the way first...
Should cost less than 100 dollars and you'll have UL aproved meters.

~Dingus Mungus

Dingus Mungus · « **Reply #65 on:** July 10, 2007, 10:24:16 AM »

I would simply go buy two identical kw meters to detect RMS in from grid, and RMS out to a string of 100w bulbs. Ultra simple install and as long as he can show at least twice as much energy out than in, it'll give him a great place to start the battle from. So for example lets say the kw meter coming from the grid is showing a steady 800watts of load the devices kw meter should show at least 1.5kw out. Now once you unplug from the grid you'll have your total consumed watts reading, and after the device stops you can then know its total output. The most important part of this technique is to record every last nanosecond of consumption from the grid. This means the kw meter must be running before the driving motor is even turned on, so we can account for its inital speed up time.

Aphasiac · « **Reply #66 on:** July 12, 2007, 09:04:13 AM »

Quote from: Dingus Mungus on July 06, 2007, 06:41:39 AM

I would simply go buy two identical kw meters to detect RMS in from grid,

These things are suddenly popping up everywhere on store shelves near me. They're amazing little units, and usually only cost about $20. (US). Great idea, Dingus.

--Mark.

ashtweth_nihilisti · « **Reply #67 on:** July 13, 2007, 07:03:00 AM »

Guys sorry i couldn't ring Stefan to inform the forum, as he is 10 hours ahead or behind me, even tho he stays awake late at night

I have an appointment to measure his set up and will follow all the advice given, he also now is going to stall more

as he wants me to put a letter out to the government stating that if he gets a percentage of thie shares in a certain investment, he will give them the device,

Dont worry im working on him and trying to steer him into the right direction, don't worry about the letter and stalling leave it with me , i expect to have a new video (done by me) measuring the device for you all in 2 weeks.

stefan ill ring you when i can no need to ring now thats all the news i got

Dingus Mungus · « **Reply #68 on:** July 15, 2007, 11:17:07 AM »

Thanks ash,

I'm greatful you are willing to follow my advice on this.
If there is a full length video (no cuts) made using dual
kilowatt meters, as to my instructions showing any OU,
I'll paypal you cash for the cost of the meters. (60$US)
It would be the least I could do. Thanks for following up
on this story. I think these trends I see on this site will
be the key to making our aspirations a reality. All of our
members are willing to work so hard to seek the answers
we need, and it makes me proud to belong to this forum!

Thank you again,
~Dingus Mungus

sevich · « **Reply #69 on:** July 16, 2007, 02:31:16 PM »

One of 3 things will and possibly are happening regarding this Chas fella.

a) ......he's spreading disinformation (paid-by/U.S. secret?) there by smearing mud on all that is possibly "free energy" by way of yet another "perpetual motion" fraud ?

b)......he will be succsessful in giving the World his working "free energy" device ?

c)......he has a working free energy prototype but unfortunately necessarily will be liquidated or just simply paid off $$$......as most are! (beats a coffin anytime)

Aphasiac · « **Reply #70 on:** July 16, 2007, 03:57:30 PM »

The pursuit of OU is such a hotbed for conspiracy theorists. But the way I see it, I'm not letting go of this thread until Ash does. Let the chips fall where they may. Eventually, whether in this thread or another one, it's going to happen.

Great work, Ash! Keep on it.

--Mark.

d3adp00l · « **Reply #71 on:** July 17, 2007, 05:08:21 AM »

That is one thing that kinda bugs me. This machine is supposed to be o/u but no one has tested it with a simple clamp on a/c amp meter?!? That would have been the first thing I did. Check the amperage draw going into the machine and test the current draw going out to the tools he supposedly ran off the machine, if in is less than out then you have o/u if not you don't. It seems the first logical test for a person to perform on a machine.

Dingus Mungus · « **Reply #72 on:** July 18, 2007, 02:47:20 AM »

Quote from: d3adp00l on July 17, 2007, 05:08:21 AM

That is one thing that kinda bugs me. This machine is supposed to be o/u but no one has tested it with a simple clamp on a/c amp meter?!? That would have been the first thing I did. Check the amperage draw going into the machine and test the current draw going out to the tools he supposedly ran off the machine, if in is less than out then you have o/u if not you don't. It seems the first logical test for a person to perform on a machine.

Well its definitely putting out more amperage than in;
If it is indeed only a 800w AC motor...

At 100% conversion thats equivelent to 120v @ 6.66 amps. The working drill/saw would eat that up no prob. BUT! My assumption is he's depositing large ammounts of energy in to a flywheel and then the excess amperage would be coming from slowing down the flywheel. This is why I want the Killawatt meters to be used. So we can track by exact RMS wattage and power factor, and compare ALL input to ALL output. No time sampled multimeter will help disprove my theory. I've already offered to pay for the required meters. Now its just time to sit back and wait for evidence or the complete lack thereof.

~Dingus Mungus

ashtweth_nihilisti · « **Reply #73 on:** July 18, 2007, 03:52:54 AM »

Well what about this

After speaking with him for over 2 hours, (man the old dood can talk

)
He said his secret in driving his electric motor is not to load the shaft what its rated for

IE, say his 800 watt 3/4 horse power motor is rated to spin at 1450 RPM

He said he never puts a load on it that REQUIRES 3/4 horse power and NEEDS to spin at 1450 RPM, (although can as obviously the 4 pole motor will any ways)

He said his pulleys always are made and load to not load the rating of the motor, this is ONE of his secrets and he states a good tip to keeping an electric efficient.

Now he has nearly finished his perpetual wheel, i convinced him to let us measure his motor Gen set, he has to re assemble it into, ill get the measurements for us all.
Ill be filming his Wheel which is run by 12 pool balls all numbered, i asked him if i can film it working then he can ope it to show no hidden DC gen

took a while but he agreed.
Should be i the next 2 weeks guys fingers crossed $:-\$

tao · « **Reply #74 on:** July 18, 2007, 03:56:46 AM »

Quote from: ashtweth_nihilisti on July 18, 2007, 03:52:54 AM

took a while but he agreed.
Should be i the next 2 weeks guys fingers crossed $:-\$

Just wanted to say thanks for the perseverance and effort your putting into this.

Any effort that CAN bring us closer to FE, is no effort wasted.

News:

User Menu

Author Topic: Chas Campbell free power motor (Read 724984 times)

ashtweth_nihilisti

Re: Chas Campbell free power motor

d3adp00l

Re: Chas Campbell free power motor

Dingus Mungus

Re: Chas Campbell free power motor

ashtweth_nihilisti

Re: Chas Campbell free power motor

Dingus Mungus

Re: Chas Campbell free power motor

Dingus Mungus

Re: Chas Campbell free power motor

Aphasiac

Re: Chas Campbell free power motor

ashtweth_nihilisti

Re: Chas Campbell free power motor

Dingus Mungus

Re: Chas Campbell free power motor

sevich

Re: Chas Campbell free power motor

Aphasiac

Re: Chas Campbell free power motor

d3adp00l

Re: Chas Campbell free power motor

Dingus Mungus

Re: Chas Campbell free power motor

ashtweth_nihilisti

Re: Chas Campbell free power motor

tao

Re: Chas Campbell free power motor