Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Chas Campbell free power motor  (Read 721578 times)

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: Chas Campbell free power motor
« Reply #45 on: July 06, 2007, 04:03:58 AM »
Hi Ash,
just do a full wave rectification with  say 1000 uF high voltage cap at the output
and measure a DC load like a low ohm resistor or a toaster or a few inc. light bulbs
as the load in the range of 2000 to 3000 Watts.
So you can measure DC volts and DC amperage in the load.
Maybe add a few chokes and a few more caps for a better lowpass until you really have DC and
no ripple on the voltage.

Try to see, if the input then really only draws around 800 Watts.

Try to see, how the big wheel is working with the displacement of the weights !

Is there a big hose of water being moved out at the right side or
what kind of weights are these  exactly  ?
What is this red thing there moving out and in again ?

Thanks.
Regards, Stefan.

ashtweth_nihilisti

  • Hero Member
  • *****
  • Posts: 727
    • Panacea-BOCAF
Re: Chas Campbell free power motor
« Reply #46 on: July 06, 2007, 04:17:34 AM »
He says that he channels back 25% of the output energy and that this keeps the unit perpetually moving, ie. perpetual motion.

So the question is, If the alternator is run only via the gravity motor, like he says, what is that 25% of electrical energy used to do? Why does any electrical energy need to be cycled back?

Unless, he uses some of that energy to bypass a 'locking/sticky point' in his gravity motor.

Did he tell you anything about that Ashtweth?


Tao, sorry i missed this man, First stefan thanks Bro..ill put it past him.
now only as he wanted to show that % power out is being used to go back into the input, so showing what he has OU.

Yes he described some 'relay' concept' where one weight does some work and then its braked then another takes off, thats in his new fly wheel, he didn't go into much detail sorry. He is waiting to finish his final design i assume he will tell us then.

Regards
Ashtweth


hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: Chas Campbell free power motor
« Reply #47 on: July 06, 2007, 04:27:44 AM »
Hi Ash,
did you see his device live yet or only on the CD he gave you ?

Please try to visit him , take a video camera with you
and tape the inner workings of the big wheel
and gear wheels.

Many thanks.

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: Chas Campbell free power motor
« Reply #48 on: July 06, 2007, 04:29:10 AM »
Ash,
is he in the new video still using 800 Watts
from the grid as the input power ?

I don?t see any input power cables ?

kames

  • Full Member
  • ***
  • Posts: 141
Re: Chas Campbell free power motor
« Reply #49 on: July 06, 2007, 04:41:19 AM »
I am attaching a screenshot from the Chas?s video. If you look carefully at the big wheel, there is a big red and probably heavy ring in the middle. During the entire video that ring remains in the same position, ie, further from the center on the right side and closer to the center on the left side. That is what creating a difference in gravitational force/momentum and keeps that big wheel rotating. How he did it I don?t know but this is absolutely obvious from the video.

Kames.

ashtweth_nihilisti

  • Hero Member
  • *****
  • Posts: 727
    • Panacea-BOCAF
Re: Chas Campbell free power motor
« Reply #50 on: July 06, 2007, 04:50:08 AM »
Stefan, ill do my best, i don't want to push him too hard, he will show us when he is ready he made that quiet clear to me ;)

Also that wheel there is for show he told me, (last night).
His new system wont have elements of either systems ???

tao

  • TPU-Elite
  • Sr. Member
  • *******
  • Posts: 378
Re: Chas Campbell free power motor
« Reply #51 on: July 06, 2007, 05:03:01 AM »
He says that he channels back 25% of the output energy and that this keeps the unit perpetually moving, ie. perpetual motion.

So the question is, If the alternator is run only via the gravity motor, like he says, what is that 25% of electrical energy used to do? Why does any electrical energy need to be cycled back?

Unless, he uses some of that energy to bypass a 'locking/sticky point' in his gravity motor.

Did he tell you anything about that Ashtweth?

kames

  • Full Member
  • ***
  • Posts: 141
Re: Chas Campbell free power motor
« Reply #52 on: July 06, 2007, 05:14:08 AM »
He says that he channels back 25% of the output energy and that this keeps the unit perpetually moving, ie. perpetual motion.

So the question is, If the alternator is run only via the gravity motor, like he says, what is that 25% of electrical energy used to do? Why does any electrical energy need to be cycled back?

Unless, he uses some of that energy to bypass a 'locking/sticky point' in his gravity motor.

Did he tell you anything about that Ashtweth?


@tao

To channel some energy back is needed to smooth the operation and increase the performance and also maybe to avoid some sticky points. If there is an excess of energy, why not to feed some of it back even for a simple reason as for a better performance and smoother operation?
Think simple.

Kames.


Aphasiac

  • elite_member
  • Jr. Member
  • ******
  • Posts: 90
Re: Chas Campbell free power motor
« Reply #53 on: July 06, 2007, 05:28:17 AM »
@ Ash:

Should you maybe try to convince him to compile details of his design and attach it to his Will with instructions for its release to the public domain? ... just--you know--as a precautionary measure for the interim?

You've obviously established some level of rapport with him by this point, so you would know best what to do. This is just a suggestion.

Great work, by the way! 

Mark.

ashtweth_nihilisti

  • Hero Member
  • *****
  • Posts: 727
    • Panacea-BOCAF
Re: Chas Campbell free power motor
« Reply #54 on: July 06, 2007, 05:40:02 AM »
Guys, i know the obvious, i represent a non profit org that deals with open source, we have put the details on the site.

We are doing our best to get as much information as possible ;)

Aphasiac

  • elite_member
  • Jr. Member
  • ******
  • Posts: 90
Re: Chas Campbell free power motor
« Reply #55 on: July 06, 2007, 05:47:33 AM »
Sorry, Ash.

Just got a little excited. It's just... there's something about that paint that makes me think this one might even be simple enough for a guy like me to replicate. :P

Cheers!

--Mark.

ashtweth_nihilisti

  • Hero Member
  • *****
  • Posts: 727
    • Panacea-BOCAF
Re: Chas Campbell free power motor
« Reply #56 on: July 06, 2007, 05:53:28 AM »
sorry missed your Question Stefan,

yes he is still using the 800 watt drive motor.

Dingus Mungus

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 859
Re: Chas Campbell free power motor
« Reply #57 on: July 06, 2007, 06:41:39 AM »
how can we prove a DC in and C out?
guys please advise, please be specific too  ;D

No need to add components to the device at all...
I would simply go buy two identical kw meters to detect RMS in from grid, and RMS out to a string of 100w bulbs. Ultra simple install and as long as he can show at least twice as much energy out than in, it'll give him a great place to start the battle from. So for example lets say the kw meter coming from the grid is showing a steady 800watts of load the devices kw meter should show at least 1.5kw out. Now once you unplug from the grid you'll have your total consumed watts reading, and after the device stops you can then know its total output. The most important part of this technique is to record every last nanosecond of consumption from the grid. This means the kw meter must be running before the driving motor is even turned on, so we can account for its inital speed up time.

I hope you find this approach to be the most simplest and honnest solution, as charging batteries are a really inaccurate way to measure actual power. Batteries will only attract skeptical debate. I'm sure Chas would like to know REAL NUMBERS and not a rough guess. It'll make rubbing the numbers in someones face all the sweeter.

~Dingus Mungus

ashtweth_nihilisti

  • Hero Member
  • *****
  • Posts: 727
    • Panacea-BOCAF
Re: Chas Campbell free power motor
« Reply #58 on: July 06, 2007, 06:53:44 AM »
Hi Dingus ,

Thanks ill mention it to Chas

one consideration tho, i think numbers don't impress as much as a LOAD. We need to be careful with light bulbs, as a caloric(sp?) meter is needed to determine HEAT and Freq per applied current, as if the bulbs a lit up, whats to say there are lit and drawing full wattage, perhaps if we measure the wires then i guess.

okay not bad...


Dingus Mungus

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 859
Re: Chas Campbell free power motor
« Reply #59 on: July 06, 2007, 07:03:24 AM »
Hi Dingus ,

Thanks ill mention it to Chas

one consideration tho, i think numbers don't impress as much as a LOAD. We need to be careful with light bulbs, as a caloric(sp?) meter is needed to determine HEAT and Freq per applied current, as if the bulbs a lit up, whats to say there are lit and drawing full wattage, perhaps if we measure the wires then i guess.

okay not bad...

No need to meter the bulb heat or any of that...
It'll all get recorder in watts at the kw meter.
Heres a link so you'll be more familiar with it:
http://www.supermediastore.com/kilwateldet1.html

I'm sure theres a more exact model out there, but thats essentially it. As you can see it'll measure the exact kWh of consumption! It doesn't get any easier, fortunately for us Chas had predesigned his device to be 100% compatable. The 800w motor is AC right? I thought I had read that you were using an inverter to power it right?

~Dingus Mungus