Hi OffGrid rdnck (redneck?),
I wan't to beleive that it is possible to tap the see of energy which is just some sort of a potential field an a therory that nobody can proof just like the big bang, but many are talking about as they have witnessed it.
I do agree that many are talking rubbish. I can state this as far it concerns electronics since I have studied electronics at university. But I'm open to other ideas. However, before I call out everything is possible and can be done, I try it myself and do my own research. When I'm successful in making excess energy then, and only then I will call out that free energy is real an possible.
I regret that many of the (self named) experts are topping each other in just guessing. Science today is able to do many unbelievable things which are repeatable and which are based on proofed theories. All their scientific works are comprehensible and fully documented.
I won't agree that the idea of gaining free energy which is only the tapping of energy that is already around, would not be possible, but I can say that for the non-aceptance of this idea it's "researcher" have to be blamed, because of their sloppy work, no matter if they are right or wrong!

So don't pay attention to all the other bullshit artists and faultfinder who want to attend scientific research and have not done their homework yet.
P.K.

Hello Stefan,

Well I have somthing to say here.    Now I have been working on a free energy project for over 25 years now.   I have just about tryed about everything. That is on the internet.   And after the new rare earth magnets came out I tryed them all again.  I could not get anything to produce power out.  I have suceded in making severial self running models, but in time they would guit because of magnet degradation.

   So I am here to say that there is no simple way to build a self runner that will produce extra power.  It is going to cost alot of money.   Now I am very gratfull that you are going to give a reward for a self runner that produces 50 watts of extra energy.   I think it will aspire more interest in people to get on the band wagon.

I have been very carefull of what I had to say here on this forum about my motor.  However I am going to state something in hopes that I don't get a visit from the MIB,  I have allready gotten six thretening calls, from I don't now where. The calls were not traseable, One I found out was from my home town made from a pay phone at a super market. The person on the line said to stop building the motor or my family was dead.

The 2" magnet motor I had running, I took it down to Goodyear Atomic plant to have it tested by one of there electronics and motor tecknitions.    Now mind you that this motor was just a two valve motor and it was running of a set of motorcycle points.  Now the points would only last just over 5 minuts at full load till they burnt up.  And the motor was just a two valve motor using 2" diam.  magnets.  It had at least 1/4 turn/rev of cost time.

This motor tested out to be in the range of 200% efficiency.  The guy that tested the motor imediatly baught into my company. Now I have been very cauthous to tell this story, because of feer of someone trying to put me to sleep.

Now my problem,  I have built a new motor that uses 4"x2"x1" magnets.  Now when I built this motor there was three different places that had the magnets I needed, when I got the motor done, I didn't have the money to buy the magnets.   Now I finally got the money and I cannot find the magnets anywhere.   So I am currently building a motor that will be a three valve motor that uses three stacks of 1" magnets 6 inches high.   Now the magnets alone cost over $700.00 in us currency.  The total cost of this new motor I estimate will be over $3000.00.  I had to buy more solicon steel and more aluminum to build it, more stanless steel bolts and bearings for the shaft.

This new motor will use 2"x2"x1" N48 Magnets stacked 6 high.  Just the magnets alone will produse about 20% more power over the 2" round magnets.  This new motor will also have a 7 inch rotor over the 5 inch rotor that the old motor had.  This should mean much more torque to the shaft.   I have found someone that is willing to build an electronic controller(Honk) for this new motor for free. However I have pleged him a shares of the company.   I am very gratfull to him.    I also found someone to donate the magnet wire(boxofsparks) to to wind the coils for this motor.  He also will get a new motor.

Now when this new motor is built I am going to take it to the Ohio State university to have it checked out.  They would not check the other motor out because it was not electronic controlled and it was sometimes not self starting because of the 1/4 cost time.

I would like to win your reward but I have a problem,  How am I going to get the money to build severial test units to send around the world, this motor weigh's in the neberhood of around 100 lbs so shipping alone would be very expencive.  It takes me around two months to just build one of these things, let alone the cost to build them.

I have plains to realease the plains to this motor on this message board as soon as I get the patents back from the patent aturney.   I would like to know what the problem is with getting patents on this thing and then turning it loose for every one to build.   I think getting patents on something like this is the best way to protect the invention itself.    If I don't get patents on it I run the risk of a big company getting patents and stoping everyone else from producing it.   Now I now you are going dispute that wance it is made public it cannot be patented, but I have found out that things can be baught and paid for in the good ole USA.

The one thing I want foir this motor is for it to be shared with everyone.  Now I realize that just everyone will not be able to build it, but with good plains they could have it built by a good machine shop.   I want my grand children to have just as good a life on this earth as at least I had or maybe even better.  And with global warming, if it keeps up, it's going to be hell on this earth in about 20 years from now if someone does not produce clean power.    I say hats of to every one that is working on clean power on this board.  However it is just not going to be cheep to do.

I have visited over three places just in Ohio that have self running units.  However they are just that, no extra power.   The simple ways are not going to produce extra power.  If that were the case there would be hundreds of them now on the market.

I would like to collect your prize money when this thing is built, and also make plains avalable to everyone, but I just do not know how I can aford to build units to send out to different people for testing.    Maybe you can tell me.

Thanks,,,,,,,,,Later,,,,,,,,,Jack W Hildenbrand
 

forget the patent and share already

and hartiberlin has a good point, just scale down this machine to a smaller size instead of using ridiculously expense materials.

peace

Hi Jack,
if your principle really will work, it should only be an engineering task to scale
it down to use smaller magnets too and also work then.

I guess you still have the problems of switching the right current pulses
to your coils and having the right timeconstants and getting rid
of the back EMF fast enough..or overcome the Inductance to
switch the coils on fast enough..

As in your motor it is a dynamic system and this is different
than when you just switch DC voltage onto an electromagnet to
compensate any permanent magnet field...

The one who runs his motor in attraction is Paul Sprain and
his "wankel principle" as you call it, seems to work.
His newest motor which I already have seen pics of privately
will probably blow away many people?s opinion on it !

Regards, Stefan.

Hello Liberty and Stefan,

I will be the first to hatts off for Stefan for offering this prize money.  However I also think it will be very hard for a small machine shop or inventer to grab it.

Stefan,  I have built severial small motors that would just bearlly selfrun(1" magnets).  But here comes the hard part, most generators do take alot of pull down during a load, I have seen very little that do not.   Even if you had a generator that did not provide a pull down during load, just the gearing or chain drive to operate this generator has a 20% loss.   Even if you mounted it on the same shaft it would take a motor that is about 200% efficient to operate it and still produce 50 watts.   50 Watts is alot of power to produce with a small motor.

I hope that you finally do find someone that CAN do it.  That will mean free energy, I hope for all.

Later,,,,,,JackH

So I am here to say that there is no simple way to build a self runner that will produce extra power.  It is going to cost alot of money.

nah Jack, you already know why this is.

Now I have been looking out on this board for severial years now and I can see that there is always someone working on someone elses stuff.  Always a rehash of old stuff.  If this old stuf worked there would be free power right now.  I am sure that the inventers that invented this stuff, if it really worked, we would have free power.

see?

It's awfully ironic, if you cant think like an inventor you cant reproduce their vague works. It's just not going to happen!

Mark my words: I've never build anything but I know the workings of most previous devices. This of course makes me a delusional fool.  So I'm not going to bother to explain it to anyone. (ha!)

The biggest irony is that after figuring out your inventi0n I fail to see what I should do with it. My gut says I should do nothing and enjoy the show. I think you kind of have enough to worry about.

But my point is that reproduction can get you to the point where the other guy gave up. After that you have to build your own railroad of thought anyway, so why not start with that?

The thing is that people have been violently bashed out of their creative mindset. 90% of mankind is the equivalent of a calculator with legs.

It's easy to see how indoctrinated everyone is. When ever there is a conspiracy those who want to expose it are the one's under attack.

We fry people in the Edison chair with 2 witness testimonials. But in public opinion your MIB are obviously fake, just like your motor. Even tho that already makes 2 eye witness testimonials. It seems like inventors only get attention from the wrong people?

You are very correct to say magnets aren't going to supply our worlds energy needs. Specially when people are only interested in discussion why not to have the discussion.

I wrote this doc, there is no room to escape the gist of the message, I've left not an inch of room for debunkery.

http://clean-nuclear-energy.go-here.nl

This is a good tool to slap disbelievers back into the real world. You can copy/past/save the doc to disk, do what ever you want with it.

@hartiberlin

I'm sure you can find 3 nuclear p0wer plants for the reproduction? I have the feeling that even your free energy enthusiasm is not big enough to bother doing so. I know it sounds like a joke but it's awfully sad actually...

If you manage to get 3 reproduction I will explain how Edward Leedskalnin was able to build Corral Castle. I didn't explain it jet as I think the coral castle mystery is one of the few things still able to inspire people.

All waiting for Agnes to return ghehehe

Why , are all making it so complex
I'm a true amateur, so I work with things I find in the house and test, no calculations what so ever.
I did a small test with lego toys of my kid,
first I putted 8 magnets (strong magnets to polarize water with (anti chalk)  in line,(had some problems keeping them close to each other, you can imagine, jumping magnets al over the place, ,but  I managed . Now I build a small car on wheels containing a magnet, put it over the first magnet, gave it a start push, and it accelerated over the magnets away from me. I still play with it
Ok proofs nothing
Second:
Putted the same type of magnets in a circle (horizontal), this time I had to replace the car by a wheel inside this circle, had some trouble adding the magnet again, pushed it and it moved constantly accelerating, but as toys do it broke, magnets flew away etc.
 I 'm now looking for better materials and magnets? it does not start on its own, but after a push accelerates slowly, depending on friction of the toys I used, I presume.
Now I?m looking for ways to better fix the magnets and will place more magnets on the internal wheel, (it must work or did I miss something)
 Remark,
 it is all in the way you place the magnets, if you move another magnet trough this field it is first attracted, and than suddenly pushed forward in the same direction.
Does anyone have the same experience? I?m sure if someone can build this devise on an existing dynamo engine, output will go up, and if this power can be reused in this engine, it should start consuming less energy, If this really works, and I'm sure it will, you can put it on all devices, also simple bike etc. Let?s dream here, you could create  overunity everywhere.
ps, feel free to used it (if it works for you)