中国 广州 陈伟华 真能磁动力
A new energy conversion method——Magnetodynamic conversion technology based on magnetic difference The world's first method to output power using permanent magnet conservative force is proposed
statement
The use of permanent magnet energy is not equal to magnetic energy perpetual motion machine! This technology uses magnetic energy to help it not rotate autonomously
introduction
At present, the world is facing an increasingly urgent energy supply problem, and the increase in traditional energy consumption has a serious impact on the environment, while also limiting economic and social development. In this study, a new energy conversion method, magnetodynamic conversion technology based on magnetic difference, was explored. This technology uses the difference in magnetic force between in-line permanent magnets and trapezoidal permanent magnets to achieve the output of mechanical energy to assist use. However, this technique has not yet been validated in large-scale experiments and requires further research and exploration.
Principle:
1. Magnetic energy is the output of internal energy generated by external energy excitation. Magnetic energy cannot be generated without external energy.
2. Magnetic energy is auxiliary power and can participate in power output. The expression form is: single-cycle power output = external energy + magnetic energy (Figure 1)
Multi-cycle cycle external energy, magnetic energy, external energy, magnetic energy...
3. It mainly uses the height change of the trapezoid to change the induction force between the two magnetic groups and uses the automatic shift phenomenon along the magnetic field lines. (Figure 2)
Magnet group structure
The magnetic energy magnetic components are divided into two groups, one set of in-line strips and one set of ladder shapes. The two groups are facing each other up and down, balancing each other. The left and right poles of the in-line magnetic group (N-S), the upper and lower pole arrangement (N-S) of the trapezoidal magnetic group are fixed on the plane, and the in-line magnetic group is fixed on the horizontal track and can be moved above the trapezoidal magnetic group. (Figure 1)
Magnetodynamic formula
The power difference used in this experiment is used as the test method
(-F) S+(2F)S+(-F)S=0
where the first (-F)S is the plot 1 region, (2F)S is the plot 2 region, and the last (-F)S is the plot 3 region
The first (-F)S refers to the internal resistance work when the magnetic group is close together, overcome by external energy (see Zone 1 of Figure 1). (2F)S is the magnetodynamic work that automatically shifts the magnetic group along the magnetic field lines. The last (-F)S refers to the internal resistance work when the magnetic group is separated. (See Blocks 2 and 3 of Figure 1). The running direction S is pushed forward by force. External energy work is positive work, but because it is to overcome resistance, it is negative work.
External energy work|-FS|=magnetic energy work|(2F)S+(-FS)|means that the two work is equal. Magnetic energy intervention saves half the work of external energy!
The result is 0, which means 1. The two magnetic groups separate themselves and do not need to push and pull with external force. 2. External energy and magnetic energy are converted, and energy is conserved.
Negative work is usually done between two permanent magnets. And this technology makes them output mechanical power!
Principle of magnetodynamic conversion
Based on the principle of spontaneous movement of magnetic field lines and energy generated by interaction forces, taking in-line permanent magnets and trapezoidal permanent magnets as examples, when the in-line permanent magnet is in the NS state against the N pole of the trapezoidal permanent magnet below, it must spontaneously shift forward along the suction force of the magnetic field line (see areas 2 and 3 of Figure 1). And spontaneous displacement is unidirectional. The magnetic field line resistance point is partially shifted down by the trapezoidal slope to reduce the entry and exit resistance. The thrust in the middle of the trapezoid is strong and the combined force of the thrust of the inclined plane is greater than the reverse resistance, so there is a mechanical kinetic energy output. (This structure has applied for Chinese invention patent)
achievement
The principle of magnetic energy is applied to the flywheel. Through the ingenious design of the magnetic energy flywheel when it is unloaded (there is air resistance, bearing resistance conversion), the ratio of external energy work to magnetic energy work is 1:30. It shows that magnetic energy creates a large dynamic space for carrying loads. It can make external energy work and magnetic energy work become 1:1 when there is a large load. In this way, the input can be saved, energy saving and environmental protection.
summary
1. Under this structure, magnetic energy has unidirectionality of force 2 There is magnetic force imbalance 3 There is the ability to attract automatic shifts along magnetic field lines 4 External forces are required to work together 5 The law of conservation of energy is still observed. 6 Discover only the only method
Some experimental status:
Put the trapezoidal magnetic group on the trolley, and the straight magnetic group is fixed on the gantry, so that the trolley slides down the slope and passes under the straight magnetic group to pass through the rough road surface and break free from the binding rope, when the gantry trolley can not rely on gravity to overcome the rough road surface and the binding rope, blocking it halfway. These all show that magnetic energy helps.
Let the trolley slide down the slope through the triple straight magnetic group gantry, and the trolley is not hindered by magnetic force to the end.
The single pendulum experiment fixes the straight magnetic group on the hanging pendulum, and the trapezoidal magnetic group is placed on the trolley. The pendulum swings down from the forward direction of the trolley, passes above the trolley, and drives the trolley forward from the rear of the car when the pendulum turns back, indicating that the magnetic energy is unidirectional.
Reference Video:
http://v.douyin.com/DVtpKT8/This article is translated by machine, if the translation is incorrect, please see the video to supplement the understanding