Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: caduceus coil building and testing  (Read 6789 times)

ragged

  • Newbie
  • *
  • Posts: 16
caduceus coil building and testing
« on: February 02, 2023, 09:30:07 PM »
Hi to all,
 I am looking for any input from experts here before I start a build. I have read everything that I can find but still have questions.

Which end would be the output?
Can a sine wave be used to power it?
Why would a ferrite core be used?
Any precautions to take? i.e. is it dangerous?

I am thinking about using copper foil instead of wire, any comments?

Thanks


Dog-One

  • Hero Member
  • *****
  • Posts: 1019
Re: caduceus coil building and testing
« Reply #1 on: February 04, 2023, 05:53:25 PM »
I would ignore much of the data found on the Internet and start with this:

http://www.treurniet.ca/Smith/SmithCoil.htm

The above link is about as close to the original source for this device that I'm aware of.

Once you have a device built and have been able to replicate what Smith documented,
then it's up to you what to use it for.

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: caduceus coil building and testing
« Reply #2 on: February 05, 2023, 01:45:50 AM »
Hi to all,
 I am looking for any input from experts here before I start a build. I have read everything that I can find but still have questions.

Which end would be the output?
Can a sine wave be used to power it?
Why would a ferrite core be used?
Any precautions to take? i.e. is it dangerous?

I am thinking about using copper foil instead of wire, any comments?

Thanks
Yesterday while going through my old hard drive I have found a lot of information about Lithuania Experiment
but I didn't see your question yet so now it is a need to spend a lot of time to get back to it.
________________________________________

I would ignore much of the data found on the Internet and start with this:
http://www.treurniet.ca/Smith/SmithCoil.htm
The above link is about as close to the original source for this device that I'm aware of.
Once you have a device built and have been able to replicate what Smith documented,
then it's up to you what to use it for.

Unfortunately all of it is garbage for me.
I had precise criticism to be posted and I decided not to...

All other links are also garbage for me:
 http://www.treurniet.ca/Smith/SmithCoil.htm
 http://www.resonantfractals.org/Doc/Magnetism/Tempic_Field.htm
 https://www.thunderbolts.info/forum/phpBB3/viewtopic.php?t=3318
 http://www.rexresearch.com/smith/newsci.htm
 http://www.resonantfractals.org/Doc/Magnetism/EarthGrid.htm
 
so whenever you see words like "light" written with capital L - "Light" it indicates likely spiritualism.
Flying sources, antigravity, particle physics with protons neutrons electrons in such context..tempic fields, "tensor" beam.
Telepathy, connection  of our receptors into Caduceus, and all other mentioned there  factors/
it is for me a piece of garbage... You're wasting your time.

Example : "tensor" beam.  :
Statement there is: spirit mediums.
https://rense.com/general70/tass.htm
Conclusion:
from physics standpoint, there is no recognition of spirit, nor angels and nor God, and we are animals.
so for physics they don't exist. by that no spiritual phenomena can take place.
it is just a story, that is not verifiable both: facts base and authenticity of the people involved.
motivation: we don't know if Jesus was an alcoholic, but definitely he wanted to make already drunk crowd more drunk
so he performed the trick known as miracle of turning water into wine.( not verifiable this time, and not reproducible anymore and any longer)
- so by that we may say that: we don't know what is the motivation of all of those writers in those links I attached.
Physicist would ask how many percent of alcohol was in this  wine. Chemist would be interested if it was wine from grape.
And some others would ask why Jesus was  so so...cheap and didn't give them Russian vodka..what's a big deal for God son right?


However 20 feet of plastic tubing  with the ferrite cores having permeability the highest possible
and Caduceus on it  sounds interesting but then you would have no way
to tune  reversed Bell like waveform so the only tool left will be to  sweep it with 
generator to find  frequency response,
But than what?
How you are going to determine  the "magic" frequency these sources are talking about.  :)

All of those articles are likely written by one person  or people fallowing the concept, - intelligent having good English skills
using proper descriptors as if he was one of the professionals in the field of electromagnetism.
All of that makes you believe that  the elegant garbage is not much of a garbage ...

If you don't want to waste your time there is a simple advice:
most of the time when I'm talking about something I do include links
to phenomena in question I'm talking about,
In all of those articles called by me "garbage" there is a statement,
 no explanation of how and why it must be this way not the other.
No links, other than similar garbage,


Opinion expressed is my own
Wesley

ragged

  • Newbie
  • *
  • Posts: 16
Re: caduceus coil building and testing
« Reply #3 on: February 05, 2023, 03:30:38 PM »
To be clear what I am looking for is a new way to produce power at low cost and high efficiency (90% +).
One idea is a cogless generator that I have an idea for. Need to build a proof of concept at this point.
Still looking at any and all other ideas. The caduceus seemed interesting so I posted here to get input from experts.

Thanks for replies.
 

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: caduceus coil building and testing
« Reply #4 on: February 05, 2023, 08:18:01 PM »
because caduceus coil is  in the title of this topic.
Bell like waveform reversed. It means it is growing up.
And if it was not interrupted  it would grow to infinity.

Wesley
« Last Edit: February 06, 2023, 12:42:10 AM by stivep »

partzman

  • Sr. Member
  • ****
  • Posts: 379
Re: caduceus coil building and testing
« Reply #5 on: February 05, 2023, 08:47:28 PM »
Wesley,

Your previous post shows a bell shaped voltage(?) curve on a scope along with a pix of counter wound coils on a common axis connected in the center as a tap.  Are we to assume these two have any connection as the coil leads have never been soldered and the coil is definitely not a caduceus winding?

Regards,
Pm

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: caduceus coil building and testing
« Reply #6 on: February 05, 2023, 08:58:03 PM »
PART#1

I'm trying to first copy original pictures from my file in the old  hard drive  but I have  plenty or more than plenty of it.
These are  self explanatory as Antanas was making accurate documentation. 
So I'm not going to explanation  now.
I don't know how to fit it here  without making copy from the   original one.
and original pictures are to big for posting
Wesley
« Last Edit: February 05, 2023, 11:08:02 PM by stivep »

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: caduceus coil building and testing
« Reply #7 on: February 05, 2023, 09:53:50 PM »
PART#2
Caduceus
Wesley

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: caduceus coil building and testing
« Reply #8 on: February 05, 2023, 10:57:39 PM »
PART#3
Caduceus second coil  the pick up coil
Wesley

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: caduceus coil building and testing
« Reply #9 on: February 05, 2023, 11:16:50 PM »
PART#4
Caduceus second coil  and the pick up coil assembly
Wesley

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: caduceus coil building and testing
« Reply #10 on: February 05, 2023, 11:27:57 PM »
PART#5
Caduceus second coil  and the pick up coil assembly+ ferrite
Wesley

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: caduceus coil building and testing
« Reply #11 on: February 06, 2023, 12:11:10 AM »
Making this pictures in smaller format  copying them and posting took me  entire  day.
As much as I'd like  to help  I can't spend days on posting..
I'll try to  post more but for more accurate information  you need to ask member of this forum  T1000 Arunas from England  for help.
It was his project not mine.
He is the mastermind behind it.

Wesley

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: caduceus coil building and testing
« Reply #12 on: February 06, 2023, 02:06:12 PM »
caduceus coil#2 with assembly and ferrite rod made from ferrite rings into rod.
Wesley

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: caduceus coil building and testing
« Reply #13 on: February 06, 2023, 02:34:22 PM »
Lithuania experiment  had few independently provided experiments:
Lithuania experiment   part  using yoke

Wesley

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: caduceus coil building and testing
« Reply #14 on: February 06, 2023, 03:34:57 PM »
 This is a set of pictures from  assembly  winded on ferrite core
but not that from yoke.- and I'm not sure if it was ferrite core - however if it  was  ferrite core than  it was likely
 lower than Yoke  in permeability   ferrite core.
It was winded and tested prior  to me  arriving to  Lithuania and  driving to Lithuania Kaunas Lab
if we could call it Laboratory , Well in that Lithuanian  reality from 2011  it was a lab.

The ferrite ring} I'm not sure if it was ferrite  or  it was  circular core winded on  core from metal ribbon
Used as the iron core of the transformer, cold-rolled silicon steel sheets of 0.5mm and 0.35mm thickness are generally selected.
used  for regular transformers. That  metal is exactly the same material used  for transformer plates. that are already insulated
by desire and conceptually non conductive across assembly.( the silicone plates_
 
So I didn't see that assembly and didn't test this assembly, but  that concept of winding I assume  was used while
I was in Lithuania but winded on  ferrite from yoke.
So I'm posting it now for your record and than I  will post  original pictures with yoke.
the pictures were given to me by Antannas who was a person making documentary ,  recording every  move of us as if he
was paid Russian spy.
The only place I was not assisted but Antannas was there too waiting for me , 
was Post Russian toilet in Kaunas Lithuania that multi floor  building was equipped with..
Few words about building.
this was the kind of advanced technology used by Russians in the time from second world war  till 1991 when  Lithuania
was freed from Russian occupation after collapse of soviet union.
Imagine long corridor (~500 feet) in multi floor building.
having one toilet per floor. (look at the picture below)

opinion expressed is my own

Wesley
« Last Edit: February 06, 2023, 09:08:35 PM by stivep »