https://www.youtube.com/watch?v=nWESbALZELQ&feature=youtu.be[/font]Quote"This video shows you how to build an over-unity device using PrimerField magnetic arrays. This video also lays some important groundwork for the next video on a fusion-based PrimerField energy source."


This thread is dedicated to examining the mechanism of this device. With help from other members I intend to take measurements to establish the efficiency of this device and see if we can make use of the effect without building a 6M loop
See Tech Planet video here https://youtu.be/DjNg7mxCNYk I'd suggest contacting him and become a donor if you'd like to see a 6M looped version of the device as I think it would work.


3D printing file, CAD specs and other resources here. https://primerfieldfoundation.org/technology-transfer David LaPoint is complete open source and I would encourage you to build based on what I've seen so far on my bench.


Unlike other magnetic gates I've worked with like Howard Johnson devices this one does seem capable of looping.
From my own experiments with 2 bowls.
With one bowl and 360gr of force applied the PM will shoot 1.5m
With two bowls and 360gr of force applied the PM will shoot 1.7M


I hope to replicate his fusion device but that will be another thread. Any ideas or suggestion on test measurements or other applications of the effect would be greatly welcomed. Signal to Noise ratio is important though so I'll be moderating accordingly.

I’m already seeing design flaws before I run it which is good. I hope to learn more from this one before I move on to the next iteration. Any improvement ideas appreciated

Hello
did you use the original files? How big are the magnets? I ordered 10x10mm and will print the shells.
Greeting
Lota
A similar project.
https://www.youtube.com/watch?v=UEc4lw1TWV4

This was also my idea (before watching this video): why not designing a slit into the bowl, so that a rotating disc can be used ?
A rotating disc has the lowest friction, compared to a ring with rollers, and also compared with a tube where the magnets are sliding inside.
With a circular tube there would also be the problem how to start the device.


Of course, if there is a slit in the bowl, the arrangement of the magnets has to be changed slightly.
The question is, if this will have a significant impact on the forces.

Although i'm always saying that magnet motors with only permanent magnets can not work, i feel like i have to try it....   

Hello, you could try. But the field is changing. You can also use a crimped disc. Can you attach the file as a stl.? Or others.
Greeting
Lota

Here is the stl. I designed it for 10mm x 10mm magnets. I'm currently printing it, so no guarantee for nothing. 

Hello
did you use the original files? How big are the magnets? I ordered 10x10mm and will print the shells.
Greeting
Lota
A similar project.
https://www.youtube.com/watch?v=UEc4lw1TWV4

Thanks Lota. Interesting vid. I have been reluctant to change the design of the bowl but now I've tested this https://youtu.be/d4sDhACaybA I think the next step is new bowls. My PMs are N35 and the same size as David's

new bowl made but i think I'll need two for it to work. It fires the PM through ok but have not compared with the other bowls.

Hi Jim,


Great workmanship as always from you.  Looks good.  Have you tried it with fewer arms.  I am thinking (dangerous thing to do) that the first arm needs to clear the second bowl before the second arm enters the first bowl.  I hope I  made that clear.


Take care,
Carroll

I’m moving on from this to use the bigger pms https://youtu.be/hxg6gZRElW0