Free Energy | searching for free energy and discussing free energy

2022 builders survivor board => Tommy Reed @ T.R.Labs => Topic started by: TommeyReed on May 07, 2022, 10:55:21 AM

Title: Tommey Reed's Advanced Engine Design Series.
Post by: TommeyReed on May 07, 2022, 10:55:21 AM
Hi All,

This is another series I'm doing.

This series is looking into advanced engine design I design and built.

It starts with the Rotary Piston Engine design.

YouTube:
https://www.youtube.com/watch?v=Fiqw1mDPepo

Interview:
https://dreamer3000.wordpress.com/tommy-lee-reed-circual-vaned-engine/

Patent:
https://patents.google.com/patent/US6860251B1/en
Title: Re: Tommey Reed's Advanced Engine Design Series.
Post by: TommeyReed on May 07, 2022, 08:20:34 PM
Hello All,

The Ratchet Engine:

This engine design can use HHO as a fuel to create a running engine.

YouTube:
https://www.youtube.com/watch?v=Mv3l-Ea1XA0

Information on the Ratchet engine:
https://patents.justia.com/patent/20100139477

Tom
Title: Re: Tommey Reed's Advanced Engine Design Series.
Post by: TommeyReed on May 08, 2022, 12:25:47 AM
Hi All,

Update on the Ratchet Engine with piston installed.

https://www.youtube.com/watch?v=EMGPKMSTb6o

Tom
Title: Re: Tommey Reed's Advanced Engine Design Series.
Post by: TommeyReed on May 09, 2022, 03:04:13 AM
Hi All,

This is a HHO test to see the effect of the Ratchet Engine design.

Will it work?

https://www.youtube.com/watch?v=EJza8zC1Xws

Tom
Title: Re: Tommey Reed's Advanced Engine Design Series.
Post by: TommeyReed on May 16, 2022, 05:40:06 PM
Hello All,

I been busy but made this short video on another engine design.

https://www.youtube.com/watch?v=_Qeyx5o8FP0

Tom
Title: Re: Tommey Reed's Advanced Engine Design Series.
Post by: TommeyReed on May 16, 2022, 06:50:02 PM
Hi All,

I am now designing the first diesel/gas injected engine.

This takes a basic gasoline engine to run on diesel and even other fuels using a mechanical high pressure diesel injector and pump.

https://www.youtube.com/watch?v=Th9s95532Qc

Tom
Title: Re: Tommey Reed's Advanced Engine Design Series.
Post by: TommeyReed on May 19, 2022, 05:43:31 PM
Hi All,

Got my mechanical diesel pump in,

https://www.youtube.com/watch?v=shxPfcQzs9A

Tom
Title: Re: Tommey Reed's Advanced Engine Design Series.
Post by: TommeyReed on May 20, 2022, 08:49:47 PM
Hi All,

I made a mistake of how I plan to connect the diesel pump to the crank shaft, in fact it will need a 2:1 timing gear/belt that connects to the engine

shaft.https://www.youtube.com/watch?v=shxPfcQzs9A&t=468s
Title: Re: Tommey Reed's Advanced Engine Design Series.
Post by: TommeyReed on May 21, 2022, 03:47:48 AM
Hi All,

In this video I am design a timing chain for a 2:1 ratio for the mechanical diesel pump.

https://www.youtube.com/watch?v=ymhdh7Gn980

Tom
Title: Re: Tommey Reed's Advanced Engine Design Series.
Post by: TommeyReed on May 23, 2022, 08:30:43 PM
Hello All,

Update on the diesel pump with gear box I'm building.

https://www.youtube.com/watch?v=KWHVFOkAIZo

Tom
Title: Re: Tommey Reed's Advanced Engine Design Series.
Post by: TommeyReed on May 25, 2022, 07:25:39 PM
Hi All,

New update on this pump housing made from pvc deck boards.

https://www.youtube.com/watch?v=q0LuXiBaqnI

Tom
Title: Re: Tommey Reed's Advanced Engine Design Series.
Post by: TommeyReed on May 28, 2022, 01:51:59 AM
Hello All,

Testing the pump and injector, it's almost ready to test run.

https://www.youtube.com/watch?v=WyV064P5B2o

Tom
Title: Re: Tommey Reed's Advanced Engine Design Series.
Post by: TommeyReed on May 30, 2022, 03:38:41 AM
Hi All,

Getting ready to test run this first gas to diesel engine conversion.

https://www.youtube.com/watch?v=NuMK3EKanSg

Tom.
Title: Re: Tommey Reed's Advanced Engine Design Series.
Post by: TommeyReed on May 30, 2022, 04:04:12 AM
Hi All,

This is part 2 of gas to diesel engine conversion.

https://www.youtube.com/watch?v=5fZqL-euSNE&t=10s
Title: Re: Tommey Reed's Advanced Engine Design Series.
Post by: TommeyReed on June 01, 2022, 11:57:42 PM
Hello All,

New update on this gas to diesel conversion build.

https://www.youtube.com/watch?v=30nYmLgEMC4

Tom
Title: Re: Tommey Reed's Advanced Engine Design Series.
Post by: TommeyReed on June 02, 2022, 05:19:38 PM
Hello All,

This is the second attempt to to start this gas to diesel engine conversion, will it run?

https://www.youtube.com/watch?v=d2SN-21xF38

Tom
Title: Re: Tommey Reed's Advanced Engine Design Series.
Post by: citfta on June 02, 2022, 06:23:50 PM
Congratulations!   YOU DID IT!!  :D   ;)
Title: Re: Tommey Reed's Advanced Engine Design Series.
Post by: TommeyReed on June 02, 2022, 06:49:52 PM
Hi All,

Another test run on this gas to diesel engine conversion.

https://www.youtube.com/watch?v=M4bCg_JBqz0

Tom
Title: Re: Tommey Reed's Advanced Engine Design Series.
Post by: TommeyReed on June 09, 2022, 12:46:20 AM
Hello All,

 I'm in Florida for about a month. I will continue my builds when I get back.

I hope we all can work together to solve these high gasoline and diesel prices, we all need to realize we need to work as a team if we are going to change the future.

Tom



Title: Re: Tommey Reed's Advanced Engine Design Series.
Post by: TommeyReed on June 22, 2022, 02:01:31 PM
Hello All,

Just a updated on my series and build.

I am still in Florida working, looks like another month I'll be down here for extra income.

My plan when I get back is to build a full version of a working Clem engine with a 30kw generator connected to it.

I do have other plans also, but this is many years of hard work that needs to have a finished running engine.

"Until you prove a theory, you have nothing but dreams"
 
Tommey Reed
Title: Re: Tommey Reed's Advanced Engine Design Series.
Post by: aussiebattler on June 23, 2022, 09:44:41 AM
Hi Tommey
Have you worked out where the "free energy" comes from and what provisions are necessary to utilize it?
Title: Re: Tommey Reed's Advanced Engine Design Series.
Post by: TommeyReed on June 24, 2022, 01:42:15 AM
Hello Aussiebattler,

The Clem engine was a liquid diesel(cooking oil) turbine engine.

The cooking oil was being used for hydraulics rim jets and also as the fuel where it had a combustion cavitation chamber that was connected to a gear pump.

Just like a jet engine where the air is squeezed in the combustion chamber and fuel is added to cause a expansion of pressure from combustion.

The fluid is moved into a chamber where a upper cavity chamber is super heated due to the pressure, when some of the fluid is vaporized in the chamber combustion with micro cavitation bubbles take place.

The higher pressure is used to power the rim jets about 2000 psi and keeps the engine running  as a super efficient liquid pump.

The Clem engine is said to run at a very high temperature and needed a heat exchanger, this is due to hydraulic pressure from the pump.

The Clem engine was not free energy but a engine that was using cooking oil to run.

Tom
 
Title: Re: Tommey Reed's Advanced Engine Design Series.
Post by: aussiebattler on June 24, 2022, 03:36:24 AM
I realise that this explanation has many supporters but has anybody yet make it work that way?
Do you really think that Clem had the knowladge to apply that sought of science?
I was under the impression that no oil was used by Clem on his journey and that it was only needed to be changed after months of use.
I also believe that the high pressure and temperature only applies at the nozzle inlets. 
Nevertheless I hope it works out for you
Cheers
AB
Title: Re: Tommey Reed's Advanced Engine Design Series.
Post by: TommeyReed on June 27, 2022, 01:43:00 PM
Hello,

Aussiebattler You're correct.

The facts are nobody really knows how it was built, in 1972 he could have used a Bitumen asphalt pump. The few photos with chain drive does show hydraulic pumps are being used.

The problem I have with a cone shape pump is the thrust bearing on it at high pressure, this will cause a piston effects as the pressure increase moving it away from the cone housing. Cooking oil rim jets mixing with air will cause the oil to increase in viscosity when it cools. I had this problem many times running cooking oil turning to a grease.

Tom
Title: Re: Tommey Reed's Advanced Engine Design Series.
Post by: skybiker63 on June 27, 2022, 09:05:24 PM
Hi Tommey,
I engineered it in this way:

I used following concept, it is a very old concept you even could buy in the 70s. There was a plastic rocket which you filled up with a little bit of water and than you pumped it up.
Without the water the rocket did not lift...but with the little bit of water it was shot to the sky.
Same effect using a empty water hose at your house...you open the focet of the empty pipe only a little bit and at the end of the hose the water comes out as a explosion.

Translatet to a wheel with small, round, conic water channels you need allways to inject water-air-water-air.
By turning the wheel water presses the air and the air presses the water out of the jets.
Important is that the channels should be small in diameter, starting about 8mm diameter going to 4mm diameter.

My engine using a timing of two injections at same time, at 12 o´clok and 6 o´clock.
So only in this position the channels are getting water in.
With an adjustable timing I could adjust more or less water injection.
Air is added by special drilled holes at the center of the wheel. holes work as a walve without need to close the holes.
Centrifugal force of the wheel will manage that no oil comes out of the air holes.
My system should run by itself at a  speed of about 1900rpm.
I will take some pictures of the device which had been professional built by a construction company.
My device had some issues as square not conic channels, so it was only one time running super shortly by itself and even did not work by trying to get it running again.
extremly complicated to adjust air, water, RPM, Waterpressure. And important to use oil instead of water. I run it on a nice place...so was not possible to use oil...

You only need to watch the time when it was engineered, it was the rocket time and even at scool they teached the water rocket effect..and you could buy the rockets as children toys.

I am very sure that this simple construction should work, but it will be not a easy job as only a single parameter needs to be wrong.

We should need a hydraulic engineer to prevent mistakes... :o

my thougts....when you make a combustion before the liquid is entering the channels it could not create the pressure which is neccessary at the jets and it could not selfrunning...
Title: Re: Tommey Reed's Advanced Engine Design Series.
Post by: aussiebattler on June 28, 2022, 05:48:43 AM
Hello,

Aussiebattler You're correct.

The facts are nobody really knows how it was built, in 1972 he could have used a Bitumen asphalt pump. The few photos with chain drive does show hydraulic pumps are being used.

The problem I have with a cone shape pump is the thrust bearing on it at high pressure, this will cause a piston effects as the pressure increase moving it away from the cone housing. Cooking oil rim jets mixing with air will cause the oil to increase in viscosity when it cools. I had this problem many times running cooking oil turning to a grease.

Tom

Initially I firstly thoughy the same but I later perceived that the cone and it's outer both revolved together so the thrust problem is eliminated. Still later I consiered that a far more friendly manufacturing technique was to use a seris of spiral cut plates with a partitian between rather than the cone anyway (as I believeyou have too)
I will post more detail if you are interested
Cheers
ab