Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Holcomb Energy Systems:Breakthrough technology to the world  (Read 439322 times)

SolarLab

  • Hero Member
  • *****
  • Posts: 975
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #2115 on: February 07, 2023, 09:38:51 PM »

Larger FB shot attached in pdf format
(maybe a little more readable)
[both Micsigs - STO1104C transfer very
large files to the PC program so they
need some work to reduce and still be readable]

{Hey, where'd my toll friend go - I was going to
LC him with a picture of my 2 smartscopes - just kidding!}

Attached: pdf (we'll see if this works) (sorta!)  :)

While I'm here - Note the N1-4 S1-4 coils use mostly recovered FB for power,
thus the LAP forms the output (as shown in shot 1)- its a 2 stage system so to speak.

For the FlyBack (FB) trolls - the FETs are SiC driven from an 800MHz processor directly
from the internal timers (dv/dt).

 

Dog-One

  • Hero Member
  • *****
  • Posts: 1019
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #2116 on: February 08, 2023, 03:33:47 AM »
Larger FB shot attached in pdf format
(maybe a little more readable)

Attached: pdf (we'll see if this works) (sorta!)  :)

Much nicer for bad eyes.  Yes, I can see it clearly now.

Dang SL, remind me to never play poker with you.  How long have you been holding
those cards?  I mean seriously, you were only talking about laser cutting just a couple
of weeks ago.  You have a whole team working on this device or just can't sleep?


While I'm here - Note the N1-4 S1-4 coils use mostly recovered FB for power,
thus the LAP forms the output (as shown in shot 1)- its a 2 stage system so to speak.

For the FlyBack (FB) trolls - the FETs are SiC driven from an 800MHz processor directly
from the internal timers (dv/dt).

You're switching at 8ms, giving an output frequency of 125Hz?  And for units, those are
actually Volts and Amps, not milliamps?  Milliamps are on the input side right?  Holy smoke,
that little thing cranks out the juice.  Would certainly charge a cell phone without issue.

Looks like to me you are recovering all the back EMF, plus getting output from the LAP,
is that correct?  The phasing isn't perfectly lined up, but there is definitely a good amount
of overlap, enough to do real work with.


That's some awesome results SL.  Nice work.


Curious, do the end nodes show slightly less output than the middle nodes?  Being
a linear generator instead of circular, I would think the middle transitions to perform
slightly better.

Cadman

  • Sr. Member
  • ****
  • Posts: 409
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #2117 on: February 08, 2023, 07:53:33 PM »
...

While I'm here - Note the N1-4 S1-4 coils use mostly recovered FB for power,
thus the LAP forms the output (as shown in shot 1)- its a 2 stage system so to speak.

For the FlyBack (FB) trolls - the FETs are SiC driven from an 800MHz processor directly
from the internal timers (dv/dt).

These are current traces from 2 identical inductances in a Ltspice sim. The green trace I(L1) is a 12V 1ms pulse. The yellow trace I(L2) is the flyback. Interesting is that the current pulses begin 1.03ms apart, and the max amplitude is only 0.03ms apart, with almost the same amplitude.

It looks to me like the flyback could power the neg pole coils at almost the same time as the pos pole coils.

I guess this post makes me an official (FB) troll. LOL  :o :P

Is this anything like what you are doing SL?


Feb2006

  • Full Member
  • ***
  • Posts: 144

Feb2006

  • Full Member
  • ***
  • Posts: 144
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #2119 on: February 09, 2023, 09:40:30 AM »
9.8997 x 8 = 79.1976 not 39.5988 ?

Jimboot

  • Hero Member
  • *****
  • Posts: 1407
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #2120 on: February 09, 2023, 11:46:28 PM »
9.8997 x 8 = 79.1976 not 39.5988 ?
I was wondering what that meant. I hope one day we'll get to see your Lingen SL. Is that with the laminates or sintered powder core? Apologies if I missed that post.

Jimboot

  • Hero Member
  • *****
  • Posts: 1407
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #2121 on: February 12, 2023, 03:56:12 AM »
Cadman has started a sibling topic here using a washing machine stator. https://overunity.com/19375/serious-hes-derivative-project-proposal/ Hopefully we'll have several different implementations out there.




Lottalead

  • Jr. Member
  • **
  • Posts: 64
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #2122 on: February 16, 2023, 12:04:19 AM »
Larger FB shot attached in pdf format
(maybe a little more readable)
[both Micsigs - STO1104C transfer very
large files to the PC program so they
need some work to reduce and still be readable]

{Hey, where'd my toll friend go - I was going to
LC him with a picture of my 2 smartscopes - just kidding!}

Attached: pdf (we'll see if this works) (sorta!)  :)

While I'm here - Note the N1-4 S1-4 coils use mostly recovered FB for power,
thus the LAP forms the output (as shown in shot 1)- its a 2 stage system so to speak.

For the FlyBack (FB) trolls - the FETs are SiC driven from an 800MHz processor directly
from the internal timers (dv/dt).

How unfortunate . It seems the Troll won ….
Thanks for sharing your knowledge and enthusiasm.. honesty above all.
I learned a great deal.
I’m certainly not one “practiced in the art”
I am a small cap investor. 
I invested in Astra Energy ASRE on the news of the joint venture with Holcomb and found this place which answered the questions I needed. Thanks to you, Rakarsky and others for the incredible debate. Glad it’s going to be archived for  others to read as the years go by. 
Luck to us all. This tech will be brought to market. It will be done first by AHES via the ILPG…. Astra Holcomb Energy Systems.
From there who knows…
LL



Jimboot

  • Hero Member
  • *****
  • Posts: 1407
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #2123 on: February 16, 2023, 01:18:27 AM »
How unfortunate . It seems the Troll won ….
Thanks for sharing your knowledge and enthusiasm.. honesty above all.
I learned a great deal.
I’m certainly not one “practiced in the art”
I am a small cap investor. 
I invested in Astra Energy ASRE on the news of the joint venture with Holcomb and found this place which answered the questions I needed. Thanks to you, Rakarsky and others for the incredible debate. Glad it’s going to be archived for  others to read as the years go by. 
Luck to us all. This tech will be brought to market. It will be done first by AHES via the ILPG…. Astra Holcomb Energy Systems.
From there who knows…
LL
I think it takes more than that to defeat SL. :) More of us are still working on variations as time permits.

ramset

  • Hero Member
  • *****
  • Posts: 8073
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #2124 on: February 16, 2023, 02:14:47 AM »
The offending member Nix ( posting here again for some reason ..comparing candles to laser beams ( prehistoric simulations from Don S time to modern simulations as Solarlabs work)) his horrific  exchange with Solarlab !


All his (16?)exchanges were removed by Administrator ,as he was also put on moderation for
A short time!


Hopefully there will be no attempts to derail topic again?











floodrod

  • Full Member
  • ***
  • Posts: 222
    • Mooker.Com- Energy Discovery Forums
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #2125 on: February 17, 2023, 04:31:29 PM »

right now Moderator floodrod is running a thread trying to replicate the spiral magnet motor i shared on Luling thread

https://overunity.com/19382/spiral-tube-magnet-motor-build-log/

no need to say more.......


I don't want to get too involved here- but since my name was mentioned; I have to.

I like out of the box thinking and proposing ideas.  But be prepared to replicate and show the results.  I already know for sure some of the videos on that playlist you presented are absolutely fake.

All Ramset and others are saying is they need some proof to the claims, which I agree..  One video demonstration with no successful replications can not be considered fact. 

"Science relies on reproducibility of results. In order to believe a phenomenon, it must be possible to reproduce it as an outcome of similar circumstances. Stories about one-time miracles are the foundation of myths and could be believed by the public, but they do not stand up to the standards of science"   - https://www.scientificamerican.com/article/to-qualify-as-scientific-evidence-has-to-be-reproducible/#:~:text=Science%20relies%20on%20reproducibility%20of,to%20the%20standards%20of%20science.

State a "Belief" without replicating it--  OK...  It's a belief.. You are entitled to believe..

State something is a "FACT" -> and you better be able to reproduce it and instruct others..

They will all listen with more interest and intrigue when you present a build to test the effect.  The more people that replicate something, the stronger the claim becomes. 

Not to get on your case Nix, but I do not want to see you banned.


ramset

  • Hero Member
  • *****
  • Posts: 8073
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #2126 on: February 17, 2023, 07:02:32 PM »
Stefan is setting up place for moderators and builders to chat
To discuss just these type of forum etiquette breaches ( posting off topic… false accusations  etc etc )
And perhaps other topics relevant to growing a better builders and researchers community !


Hopefully this will be discussed in that group?
Nix
Please address questions to Stefan in message ( email)
EDIT
For clarity
Your comment on my position on Milkovick is false
I offered him an on-site demonstration ( his demonstration)
To show system running with gain or self running !
And then open source scientists within community could help write peer review paper
To help him get technology out to world!
—-///—
Also another falsehood you wrote about me denying the possibility of magnetic motors
I have never written those words !


What I did write was unless you (Nix85) can personally share the gain mechanism (in your shared
you tube videos ( other persons you tube videos not your own )


Teach ( if you know how it works!)
 With your own bench tests and results for others to replicate!
You tube videos are not evidence ( millions of you tube videos showing FE and no replication)
  Also many claims on YouTube of technology which has never been open sourced ( you tube is not evidence)
  Here builders are spending their time and resources
And you offer none of your own !( supporting “successful “ bench tests ..


Yet …you watch persons build ( in example of spiral motor you shared a video of)
Then you wrote in Floodrods spiral motor topic “I (Nix85 ) would not waste my time with this “!
 
 I ( Chet)invited magnet motor experimenters to spiral motor topic to help !
Unless you have built something yourself that works …”then” ask others to replicate.

Pointing to videos and assuming the gain mechanism ( your concrete theories)


Hopefully new builder moderator discussions will sort this out
As mentioned Stefan has started a place for these discussions ( moderated builder boards


This is after all how forum will grow and more experiments and research can happen


Nix you already wrote you would not share open source ( if you ever find personal success of FE)…as you do not believe in forum mission statement here !
You want humanity to evolve ?
And other things ( occult science etc etc )


Hopefully this gets sorted for builders benefit!


Respectfully
Chet K







« Last Edit: February 17, 2023, 09:19:19 PM by ramset »

floodrod

  • Full Member
  • ***
  • Posts: 222
    • Mooker.Com- Energy Discovery Forums
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #2127 on: February 17, 2023, 07:31:14 PM »
floodrod i really expect you to say concretely which videos you "know" are fake in my playlist(s).

Let's see, in the case you're right i want to remove them. But it's highly likely you are not right.

Just say videos' numbers and i'll check it.

Sorry Nix. I really have no interest in pursuing this convo.  All I will say is study this one closely.  In real slow motion.  https://www.youtube.com/watch?v=igIzfTyAW9c&list=PLS6CmWwu5VGl5al_O94rmKNiuSZs7Loz1&index=14

If you really want I will spill the beans on this..  but I think you can figure it out.




citfta

  • Hero Member
  • *****
  • Posts: 1050
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #2128 on: February 17, 2023, 07:43:45 PM »
Floodrod and Chet,


You guys are wasting your time trying to have an intelligent conversation with nix.  His name should be enough of a clue.  His only real purpose in being here is to try and disrupt what others are doing.  He is so insecure he just has to make comments to try and get others to respond.  If you ignore him he will get bored and go away.  In other words "don't feed the troll!"


Carroll

floodrod

  • Full Member
  • ***
  • Posts: 222
    • Mooker.Com- Energy Discovery Forums
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #2129 on: February 17, 2023, 09:18:53 PM »
No need to be sorry, you made a claim, the least you can do is stand behind it. Ok, you linked the video, so would you point out where did you detect fakery in it.

If you can not see it yourself, he will probably post the trick later..

Just like this video..  he claims "It really works"
"Made a perpetual motion machine on a 3D printer It really works Diy Free Energy Device Igor Beletsky"
https://www.youtube.com/watch?v=-bWi1IjKiWY

Then eventually he updates with how he tricked you..
https://www.youtube.com/watch?v=MDMZR8q7_Is