Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Holcomb Energy Systems:Breakthrough technology to the world  (Read 439255 times)

rakarskiy

  • Hero Member
  • *****
  • Posts: 924
    • Free Energy Systems (UA)
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #1215 on: August 02, 2022, 10:00:56 PM »

So, the next logical phase of development is the DESIGN and BUILD

Note that, as far as I know (until proven by valid documentation to the contrary) current patent law
in nearly all countries allow constructing patented devices for educational or personal use as long as
these devices are not sold for profit. 

We are fortunate to be a part of, and witness to, such a monumental achievment in histroy. The noise
will soon pass and this new dawn will become but a distant memory! 

SL

Good luck to you! Be prepared for the fact that you will have to return to the original, I have done this many times, and called it "altruism on a rake."
 
I have everything according to plan, only I went much further than Holcomb. My designs don't look like traditional generators like Holcomb's.
Here on Figuera or a number of interesting patents are very similar.
I’ll even say more, there will be a chapter in the book on how to design a synchronous generator in which the rotor will not see the magnetic field that the phase current excites. By design, it is possible that he will only have an idle reaction.
All this is just a decision of the correct design, and not the new postulates of physics. To do this, you just had to figure out what electromagnetic induction from an external magnetic field is.
And what effect Holcomb used, perhaps I know, in any case, this indicates the asymmetry and shift of the groove tips.

Once again good luck.



Jimboot

  • Hero Member
  • *****
  • Posts: 1407
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #1216 on: August 02, 2022, 11:14:44 PM »
@nightlife
The photo's you showed were simply that of the stator of a synchronous motor.

I have attached an image from google images of the stator of a synchronous motor. notice the similarity?
This guy is a con, like so many before him.
you are contributing nothing so my responses reflect that. You don’t want to build it, fine with me. No need to expand on your decision making in this thread.

SolarLab

  • Hero Member
  • *****
  • Posts: 975
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #1217 on: August 03, 2022, 12:08:13 AM »
Good luck to you! Be prepared for the fact that you will have to return to the original, I have done this many times, and called it "altruism on a rake."
 
I have everything according to plan, only I went much further than Holcomb. My designs don't look like traditional generators like Holcomb's.
Here on Figuera or a number of interesting patents are very similar.
I’ll even say more, there will be a chapter in the book on how to design a synchronous generator in which the rotor will not see the magnetic field that the phase current excites. By design, it is possible that he will only have an idle reaction.
All this is just a decision of the correct design, and not the new postulates of physics. To do this, you just had to figure out what electromagnetic induction from an external magnetic field is.
And what effect Holcomb used, perhaps I know, in any case, this indicates the asymmetry and shift of the groove tips.

Once again good luck.



rakarskiy,

Thanks for the good wishes. Looking forward to reading your book.

Since the design approach here is pretty much based on end-to-end CAD CAM EM-CAE, the various approaches
and configurations are varified before ever leaving the computer network. By the time the G-Code for milling and
winding reaches the CNC fab shop there's an excellent chance the device will work as expected and is easily fabricated.

Tasks that are somewhat difficult only involve magnetic material selection and procurement versus costs. Off-the-shelf
items such as wire, housings, hardware cables, recepticals and good quality inverters still seem available with
reasonable lead times and costs.

The various designs are straight forward but CAE analysis can involve long processing times - up to a week or more.
Of great assistance however is the fact that the design is in digital form which is easily modified, as required, while
allowing very easy parameter changes and subsequent comparisons. Reaching the optimum configuration is
accomplished internally by the software. Another bonus is when the design is complete so is all the documentation.

Software development is similar. Using an ST Microsystems Development Board and STM32CUBE toolset combined
with Matrix Flowcode8 (a flow chart type of  microprocessor machine code or "C" programming scheme) provides a
very easy way to write the pulser sequence firmware, and change it if needed. Including the system performance
monitors, LCD GUI and control panel.

A major drawback is you get playing with these devices and it just keeps going and going - the old saying "If you
want to get a product onto the shipping dock and out the door, you'll have to shoot the engineer."

When time permits, hope to look into other schemes such as Figuera. Did Ruslan's device but still no work around
for the instability caused by the variations in the earth's electric field or something to that nature.

SL

Novus

  • Newbie
  • *
  • Posts: 48
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #1218 on: August 03, 2022, 12:08:37 AM »
Please find below E mail from DNV confirming that the Verfication Statement is valid

Hello Mr. XXXX,
The email request that you sent to Lisa was forwarded to me to handle.

The verification statement No. N141VC7H Rev. 01 was confirmed as the same deliverable in DNV’s production system and it is valid.  As indicated, the verification statement only states that the test was conducted as documented by HES-000-2 was witnessed by DNV as an independent 3rd party, and the results were as documented.  It does not indicate that the products were subjected to or found to conform to DNV classification requirements.

Please let me know if there is anything else we can help you with.


Best regards,

Mark Miser
Team Leader - CMC Approval
CMC Approval
Maritime

DNV GL USA, Inc.
mark.miser@dnv.com
Mobile +346/2139083  | 
dnv.com  |  LinkedIn
 

SolarLab

  • Hero Member
  • *****
  • Posts: 975
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #1219 on: August 03, 2022, 12:29:38 AM »
 Novus,

Thanks for checking this out and following up.  IMHO, quite important information,
plus it should clear up any questions.

SL

 

Jimboot

  • Hero Member
  • *****
  • Posts: 1407
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #1220 on: August 03, 2022, 12:53:11 AM »



rakarskiy,

Thanks for the good wishes. Looking forward to reading your book.

Since the design approach here is pretty much based on end-to-end CAD CAM EM-CAE, the various approaches
and configurations are varified before ever leaving the computer network. By the time the G-Code for milling and
winding reaches the CNC fab shop there's an excellent chance the device will work as expected and is easily fabricated.

Tasks that are somewhat difficult only involve magnetic material selection and procurement versus costs. Off-the-shelf
items such as wire, housings, hardware cables, recepticals and good quality inverters still seem available with
reasonable lead times and costs.

The various designs are straight forward but CAE analysis can involve long processing times - up to a week or more.
Of great assistance however is the fact that the design is in digital form which is easily modified, as required, while
allowing very easy parameter changes and subsequent comparisons. Reaching the optimum configuration is
accomplished internally by the software. Another bonus is when the design is complete so is all the documentation.

Software development is similar. Using an ST Microsystems Development Board and STM32CUBE toolset combined
with Matrix Flowcode8 (a flow chart type of  microprocessor machine code or "C" programming scheme) provides a
very easy way to write the pulser sequence firmware, and change it if needed. Including the system performance
monitors, LCD GUI and control panel.

A major drawback is you get playing with these devices and it just keeps going and going - the old saying "If you
want to get a product onto the shipping dock and out the door, you'll have to shoot the engineer."

When time permits, hope to look into other schemes such as Figuera. Did Ruslan's device but still no work around
for the instability caused by the variations in the earth's electric field or something to that nature.

SL
What are you milling I thought we'd have to get stamped out electrical steel. I'm looking for local suppliers.

Beginners Mind

  • Newbie
  • *
  • Posts: 36
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #1221 on: August 03, 2022, 03:36:31 AM »
Novus,

Thanks for checking this out and following up.  IMHO, quite important information,
plus it should clear up any questions.

SL

@ Novus - Big ditto.  Thank you indeed for this! 

SolarLab

  • Hero Member
  • *****
  • Posts: 975
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #1222 on: August 03, 2022, 03:47:35 AM »
What are you milling I thought we'd have to get stamped out electrical steel. I'm looking for local suppliers.


Jimboot,

A real short answer - I'm not a materials guy by any stretch nor a seasoned motor/generator
builder - but from my limited knowledge there might not be a need for laminations other than
convience (machining a motor rotor or stator structure might be a bit of a task, even for CNC).
 
Losses from laminations appear to be greater than for any eddy current losses in
a flat type structure (heat dissipation is abundant re surface area) and using staggered pulses
seems to distribute the eddy current effects. Eddy effects cause heat from current formed by
magnetic fields in the metal. High resistance metals (such as modern silicone steel) reduce this
current.
 
Also, the cnc mill is used to lay/form the windings, especially the lap coil as well as cut slots in
the pure/soft 3/8" iron plates (rotor/stator). Hedging here a bit in an attempt to avoid the flame
wars from the resident, so-called, experts!  :o   

Still very much a "work in progress."
 
SL

bistander

  • Hero Member
  • *****
  • Posts: 705
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #1223 on: August 03, 2022, 04:00:13 AM »
Stick with laminations.
bi

Jimboot

  • Hero Member
  • *****
  • Posts: 1407
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #1224 on: August 03, 2022, 04:01:39 AM »


Jimboot,

A real short answer - I'm not a materials guy by any stretch nor a seasoned motor/generator
builder - but from my limited knowledge there might not be a need for laminations other than
convience (machining a motor rotor or stator structure might be a bit of a task, even for CNC).
 
Losses from laminations appear to be greater than for any eddy current losses in
a flat type structure (heat dissipation is abundant re surface area) and using staggered pulses
seems to distribute the eddy current effects. Eddy effects cause heat from current formed by
magnetic fields in the metal. High resistance metals (such as modern silicone steel) reduce this
current.
 
Also, the cnc mill is used to lay/form the windings, especially the lap coil as well as cut slots in
the pure/soft 3/8" iron plates (rotor/stator). Hedging here a bit in an attempt to avoid the flame
wars from the resident, so-called, experts!  :o   

Still very much a "work in progress."
 
SL
Thanks for the clrification,  Milling sounds like an easier route than building a laminated rotor / stator. I thought reluctance & permeability may have been an issue. I've looked at 3D printing in iron then sintering. I'm even considering steel shot in epoxy but I'm still hunting for a more suitable rotor for my existing gen stator.

Beginners Mind

  • Newbie
  • *
  • Posts: 36
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #1225 on: August 03, 2022, 04:36:16 AM »
Thanks for the clrification,  Milling sounds like an easier route than building a laminated rotor / stator. I thought reluctance & permeability may have been an issue. I've looked at 3D printing in iron then sintering. I'm even considering steel shot in epoxy but I'm still hunting for a more suitable rotor for my existing gen stator.

@Jimboot - If you decide on laminations:  I've used http://www.polarislaserlaminations.com/ for making custom generator cores on numerous occasions and can vouch for their exceptional quality and precise dimensions.  You email them a 2D .dxf file of the lamination outline, pick your lamination material from their supply, tell them you want the laminations stacked and bonded to your specified thickness.  There are tips on their website for how to go about it all and they are very helpful with email replies.  M19 and other electrical steels are in stock.  They give you a solid quote before starting a job.  Single piece prototypes are AOK.  Other companies do the same, of course. 

On another note, are you pursuing a build of Holcomb's current, 2-stator, all AC design, or their prior, sequentially pulsed DC design?

Jimboot

  • Hero Member
  • *****
  • Posts: 1407
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #1226 on: August 03, 2022, 05:04:46 AM »
Thanks BM. I'll try and find someone locally a lot of the laser cutters I've spoken with so far do not know what transformer/silicon/electrical steel is. I like the idea a lot - I may have to end up buying a laser cutter and sheets of steel myself at this rate :)

rakarskiy

  • Hero Member
  • *****
  • Posts: 924
    • Free Energy Systems (UA)
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #1227 on: August 03, 2022, 07:24:35 AM »
https://overunity.com/19069/holcomb-energy-systemsbreakthrough-technology-to-the-world/msg569507/#msg569507
SL

I don't understand why the machine takes so long to count? I encountered such a problem, but it turned out that the conditions for calculating the initial data for the machine were incorrectly set. Sometimes it's worth breaking the calculation into parts.
My advice is, first you need to master the design element, and only then the whole design on a special software product.

As for the cutting of special electrical steel, you need to look for specialized companies. Perhaps they do not want to do this, they are unprofitable for a small order of an unformatted task, or they will deliver a sky-high counter.
Electrical steel is too brittle. Waterjet cutting is very suitable for this purpose, it does not overheat a thin sheet that can be deformed during laser cutting.

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #1228 on: August 03, 2022, 02:44:36 PM »
By the time the G-Code for milling and
winding reaches the CNC fab shop


Bunch of  grownups experienced  problems,
A need to shine is so important.  for some of this topic participants .
Loud laughing  in front of the screen of my computer
made me  go this morning first to mechanical shop.

What?

" -Some guy talks about delivery of G code."
I started to laugh too.

- "Is he milling or winding or he doesn't know.?" :) ............................. :)
- "what is he winding the core or the core winding? "


G code is not delivered  it is written for particular CNC and its operation.
But most of it for particular operation, is simply generated by  CNC and its computer.
You  are not waiting  for G code delivery...

Yes you may  directly generate G code based on CAD form external computer but it still
goes to the same CNC and it is written  specially with respect to this particular CNC.
What for.
In my lab all machines are network connected.
 it belongs to CNC and is part of CNC operation.


Material traditionally used for transformer is not machined but cut by stamping press
because of this material properties.
https://en.wikipedia.org/wiki/Stamping_press


Electrical Steel - is just general description, not used by professionals as important is the  given composition of it,
serving particular application.
https://en.wikipedia.org/wiki/Electrical_steel
https://youtu.be/DNxob3yY4LE

Dear Solarlab
There is nothing wrong with not knowing something - called lack of education in given area.
I  started  my own mechanical shop as part of the lab 10 years ago too.
- having 20+ years experience in machining, mechanics, and processing.
https://www.youtube.com/watch?v=wjaQicm9RRk

It is not a shame to do not know.
I learn  every day too.

But that need of an individual to shine, to show how smart , how good,  how experienced he is
- is making my guys laugh.
Just take it easy,
-schoolboy,  at some age is being ask  to  grow up..


Wesley
« Last Edit: August 04, 2022, 12:14:37 AM by stivep »

Cadman

  • Sr. Member
  • ****
  • Posts: 409
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #1229 on: August 03, 2022, 06:40:11 PM »
Wow stivep, what the hell is wrong with you, making an off topic 100% troll post like that? In all the years I have read your posts, you never acted like that.

I’m starting to think maybe you are not the real stivep!