Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Holcomb Energy Systems:Breakthrough technology to the world  (Read 439305 times)

pix

  • Hero Member
  • *****
  • Posts: 500
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #660 on: June 10, 2022, 08:58:10 AM »
Hello SolarLab!

Probably not on the same wavelength. Everything is simple for me, the circuit engineering approach is secondary, and the processes in the circuit elements are primary. Until I get to the bottom of the primary, the latter is meaningless.
So it is with the stator system of a synchronous generator or a Holcomb static generator. What is the meaning of modeling inaccuracies? These are mistakes, even if they seem to be true.

In the system Kapanadze, Mark et al. are sure that there is electrostatic induction. It is this section in physics that seems to exist, but it is hushed up.

Link to document not solved in "how it works" answer:  http://www.sergey-osetrov.narod.ru/Projects/Boiler/Clever_transformer_from_Zacarinin.pdf

Good luck to you, in the ordeals of the search for truth.


Zacarinin is 1:1 transformer. Very peculiar.
But nobody claimed any OU from it.


Cheers,
Pix

rakarskiy

  • Hero Member
  • *****
  • Posts: 924
    • Free Energy Systems (UA)
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #661 on: June 10, 2022, 10:12:02 AM »

Zacarinin is 1:1 transformer. Very peculiar.
But nobody claimed any OU from it.


Cheers,
Pix

pix,  what your education is?

Sergey Borisovich is a peculiar fellow. EMF transfer coefficient, called the indicator of power transfer from the first circuit to the second. I like his humor. He gave enough data to calculate the real picture.
Not a single "quarter-wave radio operator" has done this on Russian-language forums. And Sergei Borisovich's joke was taken for granted.

But maybe Sergey Borisovich was absolutely right. His device is not a converter, but an inductor. An electrostatic inductor, the task of which is to polarize to a potential difference, a wire in the second circuit? The electrostatic inductor is a revolution that destroys all modern concepts of energy, including Free Energy.

His data: 1 ampere and 4 volts in the secondary circuit under load, on the graph the amplitude value, voltage with an already completed drop of 4 volts, in the primary and secondary circuits. Source resistance 50 Ohm. These data are sufficient to make an elementary calculation. Without taking into account the resistance of the primary winding and the metal rod of the secondary circuit.
In the attachment

So here is my opinion, that no power is transferred in the Cunning Transformer, this is a vivid example of an electrostatic induction device on a conductor in an electric field. The current is the result of work in the second circuit, with a drop, and in the primary circuit it is simply a reflection of the connection between the electric field of the reactor and the conductor.

Trust can only be verified. At least check the calculation or the original data.
« Last Edit: June 10, 2022, 01:16:55 PM by rakarskiy »

pix

  • Hero Member
  • *****
  • Posts: 500
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #662 on: June 10, 2022, 02:43:02 PM »
pix,  what your education is?


My education is enough to know that a crank mechanical press is not OU  ;D
Regarding Zacarinin transformer- how do you measure Pin and Pout at kHZ frequencies ? By lamp brightness? The only proper way to measure Pout is by calorimetric measure of rectified current.


So many OU devices here, but surprisingly I don't see any one of them around me. ;D


Cheers,
Pix


rakarskiy

  • Hero Member
  • *****
  • Posts: 924
    • Free Energy Systems (UA)
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #663 on: June 10, 2022, 02:57:07 PM »
My education is enough to know that a crank mechanical press is not OU  ;D
Regarding Zacarinin transformer- how do you measure Pin and Pout at kHZ frequencies ? By lamp brightness? The only proper way to measure Pout is by calorimetric measure of rectified current.
So many OU devices here, but surprisingly I don't see any one of them around me. ;D
Cheers,
Pix

Pix, you can convince the presence of OU or the opposite as much as you like, but numbers are a stubborn thing.
Just a slide and author's data. It is the business of skeptics to measure, but I see what the algorithm considers, based on Ohm's Law.

Good luck, everyone is in their own state of belief.

pix

  • Hero Member
  • *****
  • Posts: 500
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #664 on: June 10, 2022, 04:05:57 PM »
Pix, you can convince the presence of OU or the opposite as much as you like, but numbers are a stubborn thing.
Just a slide and author's data. It is the business of skeptics to measure, but I see what the algorithm considers, based on Ohm's Law.

Good luck, everyone is in their own state of belief.
Even looking at the scope a hell  lot of an OU there  :D
Anyway, as I said- the only true measurement  in such kHZ range is calorimetric measurement of dissipated power.
Zacarina "transformer" is known since 2008. It is easy to replicate.
Don't you think that if there would be any OU it would be everywhere already? Every Joe Sixpack would run it in the backyard?
And instead burning coal, gas and oil every industrial power plant would utilise a crank presses on the large scale? ;D


Ok, I am done. Enjoy your quest for a Holy Grail of Overunity.
I will go my way.


Cheers,
Pix

ramset

  • Hero Member
  • *****
  • Posts: 8073
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #665 on: June 10, 2022, 04:25:32 PM »
Without good measurement ( unless self run ?)
All is questionable!


And as Pix says ,Caloric is closest to ideal !
And simple!


Respectfully
Chet K

rakarskiy

  • Hero Member
  • *****
  • Posts: 924
    • Free Energy Systems (UA)
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #666 on: June 10, 2022, 04:31:54 PM »
Without good measurement ( unless self run ?)
All is questionable!


And as Pix says ,Caloric is closest to ideal !
And simple!


Respectfully
Chet K


Hello!

There, without calories, it is clear that the device is clearly interesting, and the author hid the source current (in all tests).
I always trust the calculation, and the light can be replaced with any other type of load.

The question of the device of this converter, and not how the light bulb is on.

Sincerely.

onepower

  • Hero Member
  • *****
  • Posts: 1116
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #667 on: June 10, 2022, 06:07:09 PM »
pix
Quote
Regarding Zacarinin transformer- how do you measure Pin and Pout at kHZ frequencies ? By lamp brightness? The only proper way to measure Pout is by calorimetric measure of rectified current.

I use often use a pump and dump or bucket brigade circuit to measure HV or when I need a 100% accurate measurement technique.

The method is as follows...
1)Place a capacitor(s) of know value C in series with the circuit to be measured.
2)When the capacitor reaches a predetermined value V switch the capacitor out of the circuit and discharge it.
3)We can flip-flop two parallel capacitors to maintain a near constant Voltage/Current in the circuit.
4)Since we know the capacitor value C and the voltage V we know the energy of each discharge cycle, Energy = 1/2CV^2.
5)The circuit is very simple and amounts to measuring a medium by filling a bucket of known value, dumping it and repeating the cycle.
6)If the Energy in the circuit alternates then a FWBR should be used before the capacitor circuit.

A capacitor is a natural integrator and doesn't care what the voltage, current, frequency or period of the electricity is... only the Energy.

I use a modified circuit to measure higher voltages from 10 to over 500kV. I charge a HV series capacitor and when it reaches a known voltage it breaks over a spark gap. We can calculate the spark gap break over voltage based on the gap distance. Since we know the start and final break out voltage we know the change in voltage and can apply the same Energy = 1/2CV^2 calculation. Then I simply use an external electrometer to measure the number of changes in voltage (spark gap discharge) from a safe distance.

So again, we periodically charge/discharge a capacitor of known value showing us the energy present per cycle then add the number of cycles per unit of time to show the total Energy. Think of it this way, HV, HF or HV transients, skin effects, UHF can fool even the best DSO or energy analyzers but not a capacitor.

Here we should try to understand the qualities of the circuit element in question. A capacitor represents a break in the path of conduction and only a displacement current may pass. Ergo, it must store every form of current we know of and integrate it's energy as a measurable voltage. It's basically foolproof and always shows us it's present energy state...

Regards
AC

kolbacict

  • Hero Member
  • *****
  • Posts: 1418
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #668 on: June 10, 2022, 09:28:28 PM »
pix
So again, we periodically charge/discharge a capacitor of known value showing us the energy present per cycle then add the number of cycles per unit of time to show the total Energy. Think of it this way, HV, HF or HV transients, skin effects, UHF can fool even the best DSO or energy analyzers but not a capacitor.
AC
I also once suggested using an oscilloscope CRT instead of an expensive high-voltage differential probe. By simply connecting high voltage to the deflection plates, bypassing all the delicate electronics. Nobody has paid any attention to me.

SolarLab

  • Hero Member
  • *****
  • Posts: 975
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #669 on: June 11, 2022, 04:44:38 AM »

.




SolarLab

  • Hero Member
  • *****
  • Posts: 975
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #670 on: June 11, 2022, 04:47:15 AM »
.

rakarskiy

  • Hero Member
  • *****
  • Posts: 924
    • Free Energy Systems (UA)
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #671 on: June 11, 2022, 09:48:35 AM »
How difficult it is for you! Take four channels of the oscilloscope: input two channels - current and voltage, output two channels - current and voltage. One impulse can show the whole picture.

For direct current, a voltmeter and an ammeter for input and output are even simpler.

The problem is in the heads and unprofessionalism, and not in the ways to get the measurement result.

SolarLab

  • Hero Member
  • *****
  • Posts: 975
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #672 on: June 11, 2022, 07:27:19 PM »

HOLCOMB ENERGY SYSTEM - Directly Related Information

For those that might still be interested in studying the Holcomb technology.

Video: How the Holcomb Energy System Works (With No Fuel)

https://www.youtube.com/watch?v=Nm1VJ65LcXM&t=241s

Read the video comments and replies; some are quite interesting, including one regarding
Clemente Figuera's 1908 patent by *dillemburg*.

Being confortable that Holcomb's technology "plays" as advertised, the next phase begins.

Holcomb LinGen Driver Board

When time permits, a proper microprocessor based (STM32 series demo board with display) driver scheme
will be designed (using the same TI Eval Module and Littlefuse SiC's as the bench test setup).
But first lets see if the thing works with the bench test setup.


Since the Holcomb LinGen DRIVER circuits and board are quite technical, the
design will likely be posted at "All About Circuits" and include a parallel Forum
with the details, discussions, and what not. (might also use one of the other typical sites)


Keep an eye out there - should be named something like "Holcomb LinGen Driver."


From their Website: [you're likely familiar with it]
"All About Circuits is one of the world’s largest and most active independent
online communities for electrical engineers."


https://www.allaboutcircuits.com/about-us/


Current Bench Test Driver Setup

For the partial bench tests (very brief) a couple of dual channel Juntek JDS-2900 Signal Generators (FG's)
drive TI (Texas Instruments) UCC21530EVM-286 Evaluation Modules (a SiC MOSFET driver board) which
in turn drives the Littlefuse SiC FETs (Silicone Carbide high speed, high voltage) which, in turn, feed the coils.
The JDS-2900 is quite versatile so various input signal combinations can be easily tried. Programmable Logic
Inputs from the Digilent Analog Discovery2 instrument also works well but it's logic level pulses only.

Hope to see you all over at "All About Circuits" for the Driver Test!

SL



rakarskiy

  • Hero Member
  • *****
  • Posts: 924
    • Free Energy Systems (UA)
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #673 on: June 11, 2022, 08:17:39 PM »
Believe me, in order to understand how the system of Figuere, Holcomb, other patents, even the well-known synchronous mechanical generator, works, you need to understand the method of inducing the emf in the phase circuit. I've been on this since 2018. If everything goes further, the system will be as simple as a designer for a young electrician.
They come to me with questions. Everything is so logical and natural that there are only questions to the modern presentation of these issues of official science.

SolarLab

  • Hero Member
  • *****
  • Posts: 975
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #674 on: June 11, 2022, 09:20:14 PM »

rakarskiy,

No, I don't believe you!

You will have to coherently write it up and demonstrate exactly how it all works or
simulate it using CAE and present it.

It can't be that hard for you to prove your claims and assertions.

"Believe me's" don't work for me anymore - they never did, actually...

SL