Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Holcomb Energy Systems:Breakthrough technology to the world  (Read 438934 times)

Ufopolitics

  • Hero Member
  • *****
  • Posts: 575
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #615 on: June 04, 2022, 03:39:22 PM »
Hmm... Obviously you mean that the car's electrical system will simply turn off the voltage regulator when the engine is not running.

Ignition switch will turn off the supply to all Engine Electrical circuits, and yes, including the Alternator AVR.
Only some of the Accesories (clock) and some of the electronics on board computers will remain on minimal supply power.

In our case, the current through the field winding will be determined simply by the ohmic resistance of the winding. I meant it. In the other two cases, I don't know.
I didn't take measurements.

In this case just by using a simple switch, will turn off the supply to exciter coils drivers and so Input to the Mag Field Motor...that is it.


Cheers


Ufopolitics

Ufopolitics

  • Hero Member
  • *****
  • Posts: 575
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #616 on: June 04, 2022, 05:00:35 PM »
In our case, the current through the field winding will be determined simply by the ohmic resistance of the winding.

Sorry, I overlooked your statement above...

The current to the Exciter Field is not only determined by the ohmic resistance of its coils.
It is depending on the speed that Rotating Field is driven.
At low speeds, low frequencies currents in the exciter coils will INCREASE.
At high speed currents will DECREASE.
The opposite takes place at Stator Windings...Amperage will Increase with higher operating speeds.

This is the perfect recipe for Overunity...it just have to be adjusted properly.

Cheers


Ufopolitics

Ufopolitics

  • Hero Member
  • *****
  • Posts: 575
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #617 on: June 04, 2022, 05:11:58 PM »
Well, well, well


And...here we all have the answer about previous debate about AC, 3 Phase "Rotating Field"...As I said before, it don't work, period.

Based on the previous shown failed and abandoned Patent from Molina-Martinez

So, let's review its Abstract:

Abstract

A stationary cylindrical electromagnetic core, made of one piece thin laminations stacked to desired height, having closed slots radially distributed, where two three-phase winding arrangements are placed together in the same slots, one to the center, one to the exterior, for the purpose of creating a rotational electromagnetic field by applying temporarily a three-phase current to one of said windings, and by this means, inducting a voltage on the second one, in such a way that the outgoing energy is a lot greater than the input. A return will feedback the system and the temporary source is then disconnected. The generator will run by itself indefinitely generating a great excess of energy permanently.

So, He was feeding (priming) the Generator Exciter Field with AC Three Phase currents...to create that "Rotational Electromagnetic Field"

And so, it failed to produce, to generate what was expected...or "generator running by itself indefinitely "

Nope, can't do, not with this AC 3 Phase currents, no matter how much "tantrum" is given ...


Cheers


Ufopolitics

rakarskiy

  • Hero Member
  • *****
  • Posts: 924
    • Free Energy Systems (UA)
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #618 on: June 04, 2022, 05:22:53 PM »
The quest for OU in a modified AC motor  :)
Listen, guys have  been doing it with permanent magnets and without permanent magnets, using different winding configuration, exotic windings shapes, switching techniques ect.
You will not get OU from Holcomb, doesn't matter which way you are going to make B field vector rotate.
Wrong patch for OU quest.
Cheers,
Pix

Don't worry, does everything work for Holcomb?
If you correctly calculate the magnetic circuit, the work will be with Over Unity

How do you feel about this organization?   http://klnran.ru


pix

  • Hero Member
  • *****
  • Posts: 500
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #619 on: June 04, 2022, 05:23:16 PM »
Well, well, well


And...here we all have the answer about previous debate about AC, 3 Phase "Rotating Field"...As I said before, it don't work, period.

Based on the previous shown failed and abandoned Patent from Molina-Martinez

So, let's review its Abstract:

Abstract

A stationary cylindrical electromagnetic core, made of one piece thin laminations stacked to desired height, having closed slots radially distributed, where two three-phase winding arrangements are placed together in the same slots, one to the center, one to the exterior, for the purpose of creating a rotational electromagnetic field by applying temporarily a three-phase current to one of said windings, and by this means, inducting a voltage on the second one, in such a way that the outgoing energy is a lot greater than the input. A return will feedback the system and the temporary source is then disconnected. The generator will run by itself indefinitely generating a great excess of energy permanently.

So, He was feeding (priming) the Generator Exciter Field with AC Three Phase currents...to create that "Rotational Electromagnetic Field"

And so, it failed to produce, to generate what was expected...or "generator running by itself indefinitely "

Nope, can't do, not with this AC 3 Phase currents, no matter how much "tantrum" is given ...


Cheers


Ufopolitics


.... neither with you,switching the coils a'la Holcomb to get magnetic field rotation.
Just posted it to give a hint how it will end up.


Cheers,
Pix


PS. I did never said that it will OU with 3 phase rotation. Exactly the same- it will not OU with your switching the coils.

pix

  • Hero Member
  • *****
  • Posts: 500
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #620 on: June 04, 2022, 05:36:56 PM »
Don't worry, does everything work for Holcomb?
If you correctly calculate the magnetic circuit, the work will be with Over Unity

How do you feel about this organization?   http://klnran.ru
Sorry, but I do have only negative feelings about RU.
Nothing good caming trom RU direction.

rakarskiy

  • Hero Member
  • *****
  • Posts: 924
    • Free Energy Systems (UA)
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #621 on: June 04, 2022, 06:09:03 PM »
Sorry, but I do have only negative feelings about RU.
Nothing good caming trom RU direction.

 COMMISSION FOR COMBATING PSEUSION SCIENCE under the Presidium of the Russian Academy of Sciences  / КОМИССИЯ ПО БОРЬБЕ С ЛЖЕНАУКОЙ  при Президиуме Российской академии наук


kolbacict

  • Hero Member
  • *****
  • Posts: 1418
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #622 on: June 04, 2022, 06:53:22 PM »
At low speeds, low frequencies currents in the exciter coils will INCREASE.
At high speed currents will DECREASE.
The opposite takes place at Stator Windings...Amperage will Increase with higher operating speeds.
This is the perfect recipe for Overunity...it just have to be adjusted properly.
I understand. This is amazing. :)
And if we throw out the coil from the Lundell rotor, and insert a permanent magnet in its place.
What will happen in this case?

Ufopolitics

  • Hero Member
  • *****
  • Posts: 575
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #623 on: June 04, 2022, 07:00:30 PM »
And if we throw out the coil from the Lundell rotor, and insert a permanent magnet in its place.
What will happen in this case?


I do not know...ask Pix, He already tried it... ;D

bistander

  • Hero Member
  • *****
  • Posts: 705
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #624 on: June 04, 2022, 07:01:29 PM »
Well, well, well


And...here we all have the answer about previous debate about AC, 3 Phase "Rotating Field"...As I said before, it don't work, period.

Based on the previous shown failed and abandoned Patent from Molina-Martinez

So, let's review its Abstract:

Abstract

A stationary cylindrical electromagnetic core, made of one piece thin laminations stacked to desired height, having closed slots radially distributed, where two three-phase winding arrangements are placed together in the same slots, one to the center, one to the exterior, for the purpose of creating a rotational electromagnetic field by applying temporarily a three-phase current to one of said windings, and by this means, inducting a voltage on the second one, in such a way that the outgoing energy is a lot greater than the input. A return will feedback the system and the temporary source is then disconnected. The generator will run by itself indefinitely generating a great excess of energy permanently.

So, He was feeding (priming) the Generator Exciter Field with AC Three Phase currents...to create that "Rotational Electromagnetic Field"

And so, it failed to produce, to generate what was expected...or "generator running by itself indefinitely "

Nope, can't do, not with this AC 3 Phase currents, no matter how much "tantrum" is given ...


Cheers


Ufopolitics

We said it produces a RMF, not OU.
bi

bistander

  • Hero Member
  • *****
  • Posts: 705
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #625 on: June 04, 2022, 07:15:37 PM »
Are you sure about that?
I think that in the center of a magnet or electromagnet, the most "concentrated" magnetic flux (Bm), since on its pole face, the magnetic induction is B = 1/2Bm

Hi rakarskiy, where did you come up with 1/2 flux density on pole face vs middle?
This place has some good tools and info.
bi


pix

  • Hero Member
  • *****
  • Posts: 500
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #626 on: June 04, 2022, 08:01:40 PM »

I do not know...ask Pix, He already tried it... ;D
At the end, it is your time and your money wasted. ;)
Good luck.


Pix

rakarskiy

  • Hero Member
  • *****
  • Posts: 924
    • Free Energy Systems (UA)
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #627 on: June 04, 2022, 08:05:33 PM »
Hi rakarskiy, where did you come up with 1/2 flux density on pole face vs middle?
This place has some good tools and info.
bi

Source:  https://www.dextermag.com

Quote
Formulas for calculating permanent magnets
Below are methods and formulas for an approximate calculation of simple magnetic systems based on permanent magnets, recommended by the British company Dexter, which are quite accessible to the understanding of an elderly lumberjack. All subsequent formulas, comments and pictures are taken directly from the company's website, although I cannot vouch for the absolute accuracy of my translation.

 The calculation of the magnetic induction of axially magnetized cylindrical magnets with a radius (r) and length (l), at a point located at a distance (d) from the surface, along the axis is carried out according to the formula: (the attachment)

Example:
r=0.5", l=1", d=0.25", B r =12200 Gauss, B=2935.7 Gauss
Calculation by the boundary element method (BEM), B=2788.7 Gauss


В= Br/2    ;)

bistander

  • Hero Member
  • *****
  • Posts: 705
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #628 on: June 04, 2022, 08:37:48 PM »
Source:  https://www.dextermag.com


В= Br/2    ;)

Thanks. I don't agree with your deduction, but this is off topic, so let it ride.
bi

rakarskiy

  • Hero Member
  • *****
  • Posts: 924
    • Free Energy Systems (UA)
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #629 on: June 04, 2022, 09:14:16 PM »
Thanks. I don't agree with your deduction, but this is off topic, so let it ride.
bi

ok, but that's not my conclusion, that's physics.
By the way, just on the topic, the rules for the formation of magnetic circuits, a magnet or an electromagnet in a magnetic circuit and magnetic inductions will be different.