Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Holcomb Energy Systems:Breakthrough technology to the world  (Read 439383 times)

Ufopolitics

  • Hero Member
  • *****
  • Posts: 575
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #195 on: March 28, 2022, 06:55:21 PM »
Hello Ramset et Al,


Here is the simple schematic for test connections and structure...for sake of simplicity to understand it, I did not add any mountings nor base stands.


It should be understood that second flat type commutator is fixed to a base, as also the small motor.


Please, make sure you wrap your rotor with some tape which holds high temperatures, as to make it pretty stock/locked inside Stator, so when you load output it will not try to spin lose!!


Brushed Symmetrical Motors Armatures are wound by series coils in a close loop with a derivation to each commutator element solder contact...So, +/- Brushes divides the whole armature in two (for two brushed motors) so, it divides Rotor in a perfect Half with N/S Magnetic Field set at 180 degrees apart.


So, if we just rotate the feeding +/- brushes to the armature static coils through this remote setup with the small motor on the right, we will be spinning just the DC Magnetic Field of the Rotor within the stator...


Your Stator Coils, connected in series would be your output


Your Rotor would be your Input at the Continuous Slip Ring Brushes contact.


These I/O could be measured in a Two Channel Scope.


The Input for the small motor needs to be isolated from a second PSU, small power, maybe 5V and max 2A...


I used a Flat type commutator as the fixed one where brushes spin, since it is more secure at higher speeds,as it will not loosen contacts by centrifugal forces pushing brushes away from contacts...


You could also "beef up" your Stator with thicker wire and more turns...for higher output levels...or get a full 360º wound stator from another AC Induction motor of same inner diameter as your rotor...so there will not be a too wide air gap...


As you could do a lot more of improvements as you like...or adding an AC Cap to Input to smooth the waves...or adding a Diode Bridge to run DC Output to store it in Supercaps...


It would be good to add reflective tape to your small motor shaft, to read the RPM's you are turning your Magnetic Field...


Make sure you keep reading the temperature of all coils, Input-Output...do not get "excited" by the results and forget that this is NOT a Real Generator... ;D


It is a very "interesting test"... :)




You will have fun, when loading your output... ;D




Cheers




Ufopolitics

broli

  • Hero Member
  • *****
  • Posts: 2245
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #196 on: March 28, 2022, 08:00:25 PM »
Looks very similar to what Thane Heins is/has been doing:


THE NEW NORMAL FOR HUMANITY AND PHYSICS IN 2022 AND BEYOND... - YouTube

Ufopolitics

  • Hero Member
  • *****
  • Posts: 575
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #197 on: March 28, 2022, 08:19:00 PM »
...

pix

  • Hero Member
  • *****
  • Posts: 500
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #198 on: March 28, 2022, 09:19:59 PM »



Of course, you wanted to make sure if it works or not...I agree it is the only way to know for sure...
Unfortunately it didn't work...but, this is the way we can ever get to know...


And thanks, but it is not "exactly" how Holcomb works the test I suggested above...same principle though.

Cheers
Ufopolitics


Actually it worked.
The part when I tested 3 phase motor to work as asynchronous generator was a success.
Everyone could make an cheap emergency generator out of lawn mover engine and regular 3 phase squirrel cage motor  with capacitors. Don't even needs to be spinned above nominal speed.
Efficiency of such ansynchronous generator is 75-85%, better than some regular generators. The only regulation it needs is to increase capacity if load increases.


Converting AC motor to PM generator is not very efficient setup to run ac inductive loads. Yes , I got nice voltages: 153V at 1200rpm up to 200V at 2000 rpm per phase. Didn't tested higher rpm's.
Such PM generator is best to spin well above nominal speed and rectify output with 3 phase rectifier. Then it is  very efficient machine.


Cheers,
Pix


broli

  • Hero Member
  • *****
  • Posts: 2245
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #199 on: March 28, 2022, 09:25:09 PM »
I have to say as soon as they started talking about "reducing your consumption by half" and claiming the discovery to be literally the permeability of iron, red flags started going up.


Any device with that much excess energy can easily be looped back, the "inline" aspect of it makes it shady as hell.

pix

  • Hero Member
  • *****
  • Posts: 500
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #200 on: March 28, 2022, 09:49:27 PM »
I have to say as soon as they started talking about "reducing your consumption by half" and claiming the discovery to be literally the permeability of iron, red flags started going up.



AMEN.

ramset

  • Hero Member
  • *****
  • Posts: 8073
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #201 on: March 28, 2022, 10:11:01 PM »
I am hopefully going to speak with someone who visited the claimants facility soon !


Perhaps get a bit more insight  ?
EDIT
To bistander comment below
I can ask another party about that too !


Hopefully next few days


Respectfully
Chet K



bistander

  • Hero Member
  • *****
  • Posts: 705
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #202 on: March 28, 2022, 11:50:35 PM »
I am hopefully going to speak with someone who visited the claimants facility soon !


Perhaps get a bit more insight  ?

Hi ramset,
Can you ask somebody in the area to check with DNV and see if that "Holcomb Energy System verification report from dnv.com" is actually valid and they stand behind it?
Thanks,
bi

Floor

  • Guest
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #203 on: March 29, 2022, 12:10:52 AM »

Here is the simple schematic for test connections and structure...for sake of simplicity to understand it, I did not add any mountings nor base stands.


and so on...

@ Ufopolitics

Thank you for the nicely done and simplified wiring example, although it's not what I
am inquiring about.
... ... ... ... ... ... ... ... ... ...
What happens in the magnetic fields shared by the coils that might be novel/give rise to O.U. ?

lancaIV

  • elite_member
  • Hero Member
  • ******
  • Posts: 5233
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #204 on: March 29, 2022, 05:52:06 AM »
floor,do You think probably in an EMP-magnet and its MMP-output and in-/out-put ratio  or Eta ?
Applied Biot-Savart-/Ampere-/Laplace law !?
WIPO : inventor Dr.res naturalis Pavel Imris,CSc

             or Andreas Schenk,applicant Max Planck Institut fuer Festkoerperphysik (Dresden)

Charles Gilbert Page and Garfield Jr A Wood and Hector :

rotoverter              transverter                ?
rotatory                 translatory              linear   

theme terms : beam,trajection

wmbr
OCWL

Floor

  • Guest
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #205 on: March 29, 2022, 06:53:31 AM »
@Lanka IV

I don't understand your question / statement.

lancaIV

  • elite_member
  • Hero Member
  • ******
  • Posts: 5233
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #206 on: March 29, 2022, 07:17:10 AM »
Parting the Duality ? Left/right side,above/below side,external/internal side !? Right/wrong side ?

An EP-magnet and its MMP !?  electret and/or magnetret function/applyability/potential

https://en.wikipedia.org/wiki/Induction_coil

Sincerely
OCWL

p.s.: https://www-faz-net.translate.goog/aktuell/wissen/faz-wissen-podcast-geht-das-gedankenlesen-mit-chips-und-rechnern-17910659.html?_x_tr_sl=de&_x_tr_tl=en&_x_tr_hl=de&_x_tr_pto=wapp
       mind reader : without chips and computer-ing ?/!
      things reader: without chips and computer-ing ?/!
      IoT
     IoM

pix

  • Hero Member
  • *****
  • Posts: 500
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #207 on: March 29, 2022, 11:24:11 AM »
@Lanka IV

I don't understand your question / statement.
To get LancaIV you have to sniff the same stuff he is on. :D

pix

  • Hero Member
  • *****
  • Posts: 500
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #208 on: March 29, 2022, 11:58:31 AM »
Hello Ramset et Al,


Here is the simple schematic for test connections and structure...for sake of simplicity to understand it, I did not add any mountings nor base stands.


It should be understood that second flat type commutator is fixed to a base, as also the small motor.


Please, make sure you wrap your rotor with some tape which holds high temperatures, as to make it pretty stock/locked inside Stator, so when you load output it will not try to spin lose!!


Brushed Symmetrical Motors Armatures are wound by series coils in a close loop with a derivation to each commutator element solder contact...So, +/- Brushes divides the whole armature in two (for two brushed motors) so, it divides Rotor in a perfect Half with N/S Magnetic Field set at 180 degrees apart.


So, if we just rotate the feeding +/- brushes to the armature static coils through this remote setup with the small motor on the right, we will be spinning just the DC Magnetic Field of the Rotor within the stator...


Your Stator Coils, connected in series would be your output


Your Rotor would be your Input at the Continuous Slip Ring Brushes contact.


These I/O could be measured in a Two Channel Scope.

The Input for the small motor needs to be isolated from a second PSU, small power, maybe 5V and max 2A...


I used a Flat type commutator as the fixed one where brushes spin, since it is more secure at higher speeds,as it will not loosen contacts by centrifugal forces pushing brushes away from contacts...
You could also "beef up" your Stator with thicker wire and more turns...for higher output levels...or get a full 360º wound stator from another AC Induction motor of same inner diameter as your rotor...so there will not be a too wide air gap...


As you could do a lot more of improvements as you like...or adding an AC Cap to Input to smooth the waves...or adding a Diode Bridge to run DC Output to store it in Supercaps...
It would be good to add reflective tape to your small motor shaft, to read the RPM's you are turning your Magnetic Field...


Make sure you keep reading the temperature of all coils, Input-Output...do not get "excited" by the results and forget that this is NOT a Real Generator... ;D


It is a very "interesting test"... :)
You will have fun, when loading your output... ;D




Cheers
Ufopolitics


1. To get the same result it is simpler to use a slip ring AC motor , no need for your setup  :D
Slip Ring Induction Motor - Construction, Working and Its Speed Control (elprocus.com)
Slip ring Induction Motor, How it works? - YouTube


Or even simpler, just use typical squirrel cage induction motor and connect  running capacitors in triangle  and rotate it.  You will get the same thing, AC output.
Cheers,
Pix






seychelles

  • Hero Member
  • *****
  • Posts: 991
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #209 on: March 29, 2022, 01:06:05 PM »
EVEN SIMPLER A VARIABLE FREQUENCY 3 PHASE 240 VOLTS INVERTER FROM CHINA.