Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Holcomb Energy Systems:Breakthrough technology to the world  (Read 439318 times)

rakarskiy

  • Hero Member
  • *****
  • Posts: 924
    • Free Energy Systems (UA)
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #405 on: May 04, 2022, 07:50:28 PM »
Ufopolitics, all these charms are studied on the course in any decent educational institution.
It is for this design that knowledge of electric and magnetic circuit currents is important.
If a gap of at least 1 m is made in the annular core, the result of magnetic induction will be different, much smaller.

Good luck to you! Sincerely yours!

kolbacict

  • Hero Member
  • *****
  • Posts: 1418
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #406 on: May 05, 2022, 08:28:40 AM »
I congratulate Robert Holcomb on the realization of an idea that is more than 110 years old.
I mentioned the similarity of the device with Figuera's device a month ago.
Nobody heard me .  :(
I just don't understand the role of switchable resistance.
It's just an ordinary rheostat. :)

pix

  • Hero Member
  • *****
  • Posts: 500
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #407 on: May 05, 2022, 04:51:50 PM »
What is the basis of the action of the generator, leading to the effect of overunity. Just read an excerpt from a physics textbook:

Let me explain what is "surprising" in this issue, which everyone knows about and no one sees point-blank, that this is overunity. Imagine the winding of a toroidal transformer with an iron core and an air frame.

The intensity of the magnetic field, which is created in the ring core when current I flows through the winding, can be calculated by the formula: H = N*I/l, where: N is the number of turns; I - current strength in the wire, Ampere; l is the length of the ring along the midline, meters.

Let's say we have 75 turns, with a current in the wire equal to 1 Ampere and a length of the middle line of the ring core 100 mm (0.1 meter): H = N * I / l = 75 * 1 / 0.1 = 750 A / m

Source voltage U = 5 V, power is P = UI = 5 * 1 = 5 W

Absolute magnetic permeability: air = 1.25663753 * 10(−6) (0.000001257) gn / m, core = 0.0008792 gn / m, it remains only to calculate the magnetic induction at a magnetic field strength of the winding equal to 750 A / m:

Without core: B = μаH = 0.00000125663753 *750 = 0.000942478 T,

With a core: B = μaH = 0.0008792 * 750 = 0.6594 T.

With the same expended source power of 5 W, we obtained an increase in the resulting magnetic induction by 700 times.


 :D  Then why every transformer isn't OU?
Listen, everyone who graduated secondary school knows what permeability is and that ferromagnetic materials amplify weak magnetic field.
As soon as you want to utilise that amplified magnetic field and current is flowing in the output coil-Lenz law applies, and small current in the output coil is enough to create opposite amplified magnetic field counter reacting  amplified magnetic field created by inducing current from the input coil. It works both ways.


Cheers,
Pix






ariovaldo

  • Sr. Member
  • ****
  • Posts: 374
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #408 on: May 05, 2022, 05:12:01 PM »
Years ago, I tried to replicate Figueira's setup, but I stopped short (no time). This video shows the resistance array that I put together ( just as an example)


https://youtube.com/shorts/nAeWdqSCTek?feature=share

rakarskiy

  • Hero Member
  • *****
  • Posts: 924
    • Free Energy Systems (UA)
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #409 on: May 05, 2022, 05:59:27 PM »
I mentioned the similarity of the device with Figuera's device a month ago.
Nobody heard me .  :(
I just don't understand the role of switchable resistance.
It's just an ordinary rheostat. :)

Figuera, judging by his patents, has two designs in the form of a dynamo with fixed parts (1902), and a second patent (1908), revealing the essence of control, by changing the magnetic induction of the magnetic field in electromagnets, due to a smooth change in resistance in the circuit of electromagnets (through the slider contact of the ring rheostat). In 1902-1904 moving the moving contact over the rheostat was a common solution. It was Figuera who was the first to use this meter for a system for generating (more precisely, converting) electricity. Most importantly, I laid the phase wire in the gap between the electromagnets. "Y" in the diagram in the Figueira patent is exactly the element in which the phase wires are laid. Unlike Holcomb Energy Systems, Figuera has a single-phase design.
It is impossible to achieve magnetic induction so that the output power exceeds the excitation costs in the transformer version. This is only possible when the wire is inside the core (in the groove). This is one of the reasons why top-wound Gramm oscillators have become obsolete.
The patent shows a method for creating an alternating magnetic field in a magnetic circuit. Only the design of the magnetic chain itself is not shown, this is indicated in the patent.
Holcomb Energy Systems is already a more advanced solution for such a system.

Apart from Holcomb Energy Systems, there are other solutions for static converters. For the first time, only the practical operating model of Holcomb Energy Systems is presented. Others also exist but have not been shown publicly. There was another demonstration by Carl Tilly in the USA. But I did not find patents and information about the design system in the public domain. Carl Tilly was demonstrating an electric car, with his static converter. I don't think Carl Tilly's principle was different.

Quote
On March 28, 2003, in the state of Tennessee, USA, 20 armed men confiscated all devices, documents and bank accounts of Tilly Foundation, Inc. So far, they have not returned anything or reimbursed the costs, said Carl Tilly, president and owner of the company. In order to protect the technology, just a week after the action, he had already begun building another electric car and two power sources for mansions. Now it's happening in another state. The latest electric car has been tested by several engineers and received a positive result.
https://tesla3.com/tilley-foundation/

PS  I'm also working on a pulse system that should keep the battery charged   https://rakatskiy.blogspot.com/2022/05/electric-solid-state-generator-tg.html
     
 

Ufopolitics

  • Hero Member
  • *****
  • Posts: 575
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #410 on: May 05, 2022, 06:23:23 PM »

 :D  Then why every transformer isn't OU?
Listen, everyone who graduated secondary school knows what permeability is and that ferromagnetic materials amplify weak magnetic field.
As soon as you want to utilise that amplified magnetic field and current is flowing in the output coil-Lenz law applies, and small current in the output coil is enough to create opposite amplified magnetic field counter reacting  amplified magnetic field created by inducing current from the input coil. It works both ways.


Cheers,
Pix


Yes Pix, you have everything correctly explained...plus, you've answered your own question about why there is no OU in any transformer.


Lenz Law...period.


I will try (again) to explain this...


In a Transformer, both Magnetic Fields (Primary-Secondary) are constrained to the same steel core, so they have no other choice but to react against each others, giving the results we all know.


Believe me about this...Once we get the Magnetic Field of the Primary (or Exciter/Inductor, for the Generator case), to Mutate (move, translate) in Space/Time through the steel cores, Lenz can not act, period...it just bounces back and forth*, but we will see almost no increase (like 1 or 2 tents of an Amp) on the Input Currents...


Lenz can not act against a massless, frictionless moving magnetic field through Space/Time.


I have done it, I have observed it...I am just making a better build.




So, briefly resuming this:


The output coils and core, whenever loaded, this Reacting Magnetic Field is constrained to its own core-coils...However, where the massless field is displacing through space/time is definitively NOT constrained to its own core-coils...and Lenz can not "catch it"...no matter how much "tantrum" in vibrations and jumping it does...
And...if this Magnetic Field, generated once we add a load,  can not act directly and against our moving Magnetic Field...then there is simply not increase at Input.




Cheers


*In my testing, the armature which has the moving magnetic field, will just bounce, since I left it loose on purpose, for a physical and sound demo...so, as soon as a load is applied to output coils, it increases the sound and vibrations...but no increase at Input.




Ufopolitics

rakarskiy

  • Hero Member
  • *****
  • Posts: 924
    • Free Energy Systems (UA)
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #411 on: May 05, 2022, 07:46:23 PM »
This topic has already mentioned the guy's experiment with the rotation of the field in the stator gland from the engine, through the electromagnet control system.

https://www.youtube.com/watch?v=Wn49fDHCHdo

The secondary circuit for the output of the phase is organized through a coil wound on the core and inserted as a jumper. (А)
To do it right, the second block of the core with grooves and lay the wires according to the rules of generator phase winding. (В)



Ufopolitics

  • Hero Member
  • *****
  • Posts: 575
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #412 on: May 05, 2022, 07:52:25 PM »
Yes Rakarski, that is Pierre Cotnoir...


Almost everyone knows him here... ;D
There is a Thread also here...which is abandoned now.


Same thing, different "color"...He is rotating the Field on the outside core (a typical stator) and collecting on the inside as the lonely core.




Regards




Ufopolitics

Ufopolitics

  • Hero Member
  • *****
  • Posts: 575
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #413 on: May 06, 2022, 03:40:58 PM »

The secondary circuit for the output of the phase is organized through a coil wound on the core and inserted as a jumper. (А)
To do it right, the second block of the core with grooves and lay the wires according to the rules of generator phase winding. (В)


Yes, you are very correct Rakarskiy.
The best way to collect on this setup, is not "A" but "B" setup on the inside...that way it would be 360º sweep of exciter (Inductor) over the Induced .


However, still with a single coil, 700 ft of wire and a heavy core as (A), Pierre was able to loop his setup.


I have also have being doing it the "structural" correct way (B) since many years ago...see image


However, I was doing it wrong, by allowing Field to collapse during rotation...not good.




Cheers




Ufopolitics

Lunkster

  • Full Member
  • ***
  • Posts: 190
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #414 on: May 06, 2022, 04:30:11 PM »
Hi everyone,

I have Been reading most of these posts about this new technology.
I am a hobbyist who writes books for hobbyists to read and experiment from those ideas.
So I am not up to the intellectual level as a lot of you.
But I have an idea.

What if a few people on this forum bought one of the first self-contained units and
performed all kinds of testing on it.  Would that not answer a lot of questions about the
operation and technological questions on how it works.

By doing this,  I am sure that there would be other ideas on how to improve on the technology.
These new improvements in themselves could be patentable, although I am an open source guy myself.

I believe that the more people get there hands dirty and build something, that faster OU products
will hit the market.

I truly like the idea of no moving parts in a generator.  This is the way to the future in my mind.

I am going to build a "Motionless Switching Magnetosphere Electric Generator" from this forum.
There are other motionless generators of interest as well at this forum.

I have learned a lot from everyone's input and I hope some of you will take up the interest and purchase
one of Holcomb's self-contained generators and experiment with it and show the testing
results on this forum.

We are all benefitting from each other.
Thank you all for your inputs.

Jay Lunke known at Lunster 


 

ariovaldo

  • Sr. Member
  • ****
  • Posts: 374
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #415 on: May 06, 2022, 05:06:10 PM »

Yes, you are correct Rakarskiy.
The best way to collect on this setup, is not "A" but "B" setup on the inside...that way it would be 360º sweep of exciter (Inductor) over the Induced .


However, still with a single coil, 700 ft of wire and a heavy core as (A), Pierre was able to loop his setup.


I have also have being doing it the "structural" correct way (B) since many years ago...see image


However, I was doing it wrong, by allowing Field to collapse during rotation...not good.




Cheers




Ufopolitics


I have done something similar. Instead of just one coil inside, I put a wound-slotted rotor inside it. It didn't work, and I stopped everything. Also, I rewound a motor and tried 3 phases, 2 phases, and one phase.
I didn't shoot a video in the last one.
The video below is the first attempt


https://youtu.be/H6oAZi8Cc5I




Ufopolitics

  • Hero Member
  • *****
  • Posts: 575
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #416 on: May 06, 2022, 05:26:23 PM »

I have done something similar. Instead of just one coil inside, I put a wound-slotted rotor inside it. It didn't work, and I stopped everything. Also, I rewound a motor and tried 3 phases, 2 phases, and one phase.
I didn't shoot a video in the last one.
The video below is the first attempt


https://youtu.be/H6oAZi8Cc5I


Hello Ariovaldo,


Let me see if I understand correctly what you are doing on that video:


You are feeding (Input) with single phase AC 110-120V from your wall, plus a capacitor, the 3 phase motor stator, on just one phase, one set of coils...correct?


Then collecting on the center coil on iron...right?




Thanks




Ufopolitics




Ufopolitics

  • Hero Member
  • *****
  • Posts: 575
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #417 on: May 06, 2022, 05:46:42 PM »
But let me say this...


@ Ariovaldo: What I really love about your video, is what we have been discussing here before...when many here have insisted that AC will give Us the "rotary Field" that we need for this setup...and I say a big NOPE, it will NOT work at all.


Thanks Ariovaldo, you just have proven that plain AC will NOT work!!


...it is not that simple my friend...sorry, but you have just built a pretty "exotic" transforner there...


It is a Specific type of rotation involved, as it is a Specific type of winding involved to be successful...and yes, it is DC what we need, and NOT AC as the Inducing- Rotating- Field!!




Thanks again




Ufopolitics

rakarskiy

  • Hero Member
  • *****
  • Posts: 924
    • Free Energy Systems (UA)
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #418 on: May 06, 2022, 05:57:13 PM »
Ufopolitics,  have a good time!

EMF in the core of the generator will appear only when the magnetic field changes. In mechanical generators, this change is provided by moving the pole with magnetic flux past the phase wire. In static systems, the movement of the field is carried out by switching electromagnets along the circuit, using a special control algorithm. In addition to all this, it is necessary to achieve a change in magnetic induction from a minimum to a maximum in both zones of the pole pair. In addition to the change itself, the placement geometry is also important so that the EMF moves in the generator coil housing. There are many nuances. Since the generator is wound, you still need to know how to do it right.
In option B, I did not specifically disclose the features, although the details should be obvious to the specialist as two times two.

The problem of a private researcher is the use of fittings from electric motors. For generation, it is necessary to select iron cores with the appropriate magnetic permeability and maximum magnetic induction. For excitation, provide for a larger number of turns, while the generator must tend to a smaller number of turns and a larger cross section. Good motor, bad alternator and good alternator, bad motor.

Для хорошего результата нужно заказывать нарезку железа, все что делают промышленно в готовом варианте это для электромоторов а там свои особенности.
https://sc04.alicdn.com/kf/H7505633035a14e269943cfea89f8fb58f.png

Ufopolitics

  • Hero Member
  • *****
  • Posts: 575
Re: Holcomb Energy Systems:Breakthrough technology to the world
« Reply #419 on: May 06, 2022, 06:17:15 PM »
Ufopolitics,  have a good time!


You too, have a good time, Rakarskiy!



EMF in the core of the generator will appear only when the magnetic field changes. In mechanical generators, this change is provided by moving the pole with magnetic flux past the phase wire. In static systems, the movement of the field is carried out by switching electromagnets along the circuit, using a special control algorithm.


Correct, I agree...but, it is not just "switching coils", yes, a "special algorithm" must be used or it will not work...
There are many "rules" (as "no no's" involved)...like, never kill the dipole!! (remember that? and who said it?)...or the Main Field as the Inductor must never, ever collapse.
It is all about "Rotating the Virtual Magnetic Field through Space/Time at a certain speed"...by reversing -a minimum- of coils polarity which mutates the field into other parts of the main static rotor...


In addition to all this, it is necessary to achieve a change in magnetic induction from a minimum to a maximum in both zones of the pole pair. In addition to the change itself, the placement geometry is also important so that the EMF moves in the generator coil housing. There are many nuances. Since the generator is wound, you still need to know how to do it right.


Yes...




In option B, I did not specifically disclose the features, although the details should be obvious to the specialist as two times two.

The problem of a private researcher is the use of fittings from electric motors. For generation, it is necessary to select iron cores with the appropriate magnetic permeability and maximum magnetic induction. For excitation, provide for a larger number of turns, while the generator must tend to a smaller number of turns and a larger cross section. Good motor, bad alternator and good alternator, bad motor.




Yes...

Для хорошего результата нужно заказывать нарезку железа, все что делают промышленно в готовом варианте это для электромоторов а там свои особенности.
https://sc04.alicdn.com/kf/H7505633035a14e269943cfea89f8fb58f.png


Miña ñet gavarit pá Rusky...LOL




Greetings






Ufopolitics