i just want it to share kapagen fast charging and high amp coil finally good result but not finished
before i explain about the device i just want it to share something very important with my friends here and this is just my opinion i dont care what you have to say ... but i am talking from my experience ..... i have been reading alot of infos here about kapagen replication but the negative thing i found here is to much information and i got confused just like many people here !!!! and what i did is start it to collect caps diodes transformers from different electronic things ....because they dont eat food they are always good to have them, when ever you need them you can use them and do the testing ,,,,my advice is for alot of people read less but work more and test test because the theory is with 100=1 .... i have found a way how to charge the large capacitors very fast with high amps  from small nst 6kv 60w 30ma .....by changing and adding more grounds in the coil and putting ferrite core in the coil and changing the size of diodes and running different diagram you can achive this also.... .. the one i am using is from nikola tesla old patients and and some caps and diodes modified different there is the link https://www.youtube.com/watch?v=Cd7ftCx1B1k   i can still raise the amp but the spark gap starts to pop very loud .... i have already bridge rectified into dc and the problem i hade is the voltage was not going through diodes until i founf the right size of the diodes and the dc amps was high, now my next  plan is to get those high amps diodes like tariel has and Continue the Project .. and see what it does.