Author Topic: Капанадзе (Read 75506 times)

Void · « **Reply #45 on:** October 24, 2020, 12:20:43 AM »

Thanks niyazzi!

niyazzi · « **Reply #46 on:** October 24, 2020, 12:26:00 AM »

And more. Bunk has a partner with the nickname Googlodrom.They did the installation together. He was banned from u-tube a long time ago.He doesn't make any more videos. It is possible that his old videos related to the Kapanadze installation may have been saved on your resource. I think these videos would be useful. Recently Googlodrom said that they gave the scheme on one of the foreign sites.And someone repeated their installation. If this is true, it would be easier for you to find this information because I do not know any foreign sites dealing with the topic of Kapanadze.

justawatt · « **Reply #47 on:** October 24, 2020, 09:06:27 AM »

https://overunity.com/17472/maxim-aliyev-replication/.

If so then it could be this only.but success for far

Jeg · « **Reply #48 on:** October 24, 2020, 09:43:34 AM »

Hi guys
I watched carefully all of their videos having only one thing in mind.
And there is no moment even for one second that they show us the back side of the big pipe coil. It is supposed that the two thick coils are connected together at the back of the coil, but really the inventors are hiding this connection very carefully. It makes you wonder...

If justawatt is right and i believe he is right, the long coil is seperated in to two parts. The end of each part might connects itself to the end of each of the thicker coils.
During the last years i have seen some devices that utilize two Tesla coils, one being 1/4 of the wave, the other being the 1/2 of the wave. That means that the 1/4 gives an antinode at its end (high voltage), and the other gives a node (high current). If a load is connected in between, it takes the same time a High voltage peak along with a high current peak. (think Tesla's fireballs).

r2fpl · « **Reply #49 on:** October 24, 2020, 10:13:43 AM »

Quote from: niyazzi on October 23, 2020, 09:59:40 PM

I'm trying to upload an archived video, but I can't. https://cloud.mail.ru/stock/3Hi8FKBC6k66vyADq3NU4Vf4

What is the question.
1. The kettle with water cannot be moved so it can be connected under the table.
2.LED? the heater may not work at all and only the LED is on
3.Radio - why is everything working? there should be interference.
4. When the hand touches the coil also there should be interference and it should affect the current output. However, we do not know the operating frequency of the device and it may be immune to interference.

I've seen videos and there is something on each that shows a hidden wire. Bunk holds the device and the bulb is lit - yes, but there may be an electric wire in the sleeve of his jacket. You can't see anything in the saw with the saw.
Everything is not very clear but it is actually very simple and maybe nobody understands it.
The device should generate HF and act as a stepdown transformer. If anyone has a different opinion please show me.

At no time can I see the light bulbs (heater). They should light up because it turns off the heater for a while and reconnects it. Maybe you can't see well or they are broken. Both? He repeats that the radiator gives off heat, but this information is not reliable for us.

The gentlemen are probably making jokes and having fun.

justawatt · « **Reply #50 on:** October 24, 2020, 01:02:47 PM »

See this what happens people trying to find hidden wires.
Rather than try to figure out its working.

r2fpl · « **Reply #51 on:** October 24, 2020, 01:09:23 PM »

Quote from: justawatt on October 24, 2020, 01:02:47 PM

See this what happens people trying to find hidden wires.
Rather than try to figure out its working.

Did you confirm that this device is working? hmmm
I showed the weak points of the installation. Everyone draws conclusions.

niyazzi · « **Reply #52 on:** October 25, 2020, 06:20:49 AM »

I also had my doubts. Because the kacher frequency changes even as the hand approaches. And in the video, they move the installation, bring their hands closer ,connect the load. Nothing changes. Googlodrom said that it is not kacher. The output is 260 volts, 193 Hz

pix · « **Reply #53 on:** October 25, 2020, 06:49:42 AM »

Oh boys....
It's Tesla.
Question:from where energy comes?
Answer: imagine pendulum, you move it one time, it swings multiple times. Every swing from Tesla coil primary is accumulated in secondary.
Question: how to take energy without destroying resonance?
Answer: spark gap. See video of Tariel Kapanadze device in Turkey. Sparks from Tesla coil top goes to HV step-down transformer.

You welcome.
pix

r2fpl · « **Reply #54 on:** October 25, 2020, 09:03:13 AM »

Quote from: niyazzi on October 25, 2020, 06:20:49 AM

I also had my doubts. Because the kacher frequency changes even as the hand approaches. And in the video, they move the installation, bring their hands closer ,connect the load. Nothing changes. Googlodrom said that it is not kacher. The output is 260 volts, 193 Hz

I think most of us only did the kacher test with Mhz frequencies. If it is not a Tesla coil transformer and there is no kacher, it is obvious that the device may be operating at low frequency. There is no iron core there and no 100 kg of wire to create a resonance, so what is the principle of the device?

We can talk about ground waves, but also not possible because the coils are moved and should be stationary with respect to the ground. Maybe it doesn't matter either. Opportunities can be invented, but the main thing is to look for a scam.
proverb: If something looks impossible it probably is impossible.

I think Googlodrome and Bunk should make a movie where you can clearly see everything. Turning on the device, connecting the light bulb, leaving the building and leaving it without touching it. It's easy if you want to show the truth.

Jeg · « **Reply #55 on:** October 25, 2020, 09:47:45 AM »

Take a look. There is definately something in to it.
https://www.youtube.com/watch?v=Sa30TbM6wak

justawatt · « **Reply #56 on:** October 25, 2020, 01:11:52 PM »

Try things out only then we will learn
If you see all the free energy is about sine peak
I got 480volt but no amps

Jeg · « **Reply #57 on:** October 25, 2020, 03:23:56 PM »

Quote from: justawatt on October 25, 2020, 01:11:52 PM

Try things out only then we will learn

This is the only way

justawatt · « **Reply #58 on:** October 25, 2020, 05:19:33 PM »

Jet that is right

Some thing about driver. We have to findout

Like niyazzi said we don't see the interference is because the CFL driver works. At 310 50hz out,the output is not high frq.
Jeg it is not tesla coil.that is why they said out put frq is in 300hz range and what wire did you use .
I used 26 swg and 23 swg.
When I used 26swg and 28swg I didn't get out

Bunk thanks for sharing the photo,aim getting volts but no amps,can normal driver be used.bunkif you are watching this please help

niyazzi · « **Reply #59 on:** October 26, 2020, 04:58:25 AM »

Jeg. Look at the picture again. Here all directions of winding in are specified correctly.The upper end of the L2. 1 is in the air (not connected anywhere). L2. 2 most likely connects to L2.1.

News:

User Menu

Author Topic: Капанадзе (Read 75506 times)

Void

Re: Капанадзе

niyazzi

Re: Капанадзе

justawatt

Re: Капанадзе

Jeg

Re: Капанадзе

r2fpl

Re: Капанадзе

justawatt

Re: Капанадзе

r2fpl

Re: Капанадзе

niyazzi

Re: Капанадзе

pix

Re: Капанадзе

r2fpl

Re: Капанадзе

Jeg

Re: Капанадзе

justawatt

Re: Капанадзе

Jeg

Re: Капанадзе

justawatt

Re: Капанадзе

niyazzi

Re: Капанадзе