Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: The basic requirements to obtain free electricity.  (Read 2451 times)

Cadman

  • Sr. Member
  • ****
  • Posts: 409
The basic requirements to obtain free electricity.
« on: February 10, 2023, 01:28:38 PM »
What is it we really want here? Isn’t it free electricity? Something with substantial volts and amps?

Start by paying attention to the pioneers. The experimenters, scientists and physicists in the past who ‘discovered’ and worked with electricity. There were no laws or definitions or even terminology for it back then. It was more like ‘Hey, I have an idea. Let’s try it and see what happens.’ They invented the terminology to describe volts, amps, and magnetic fields. They didn’t know what it was but they figured out how to work with it and use it using their own terminology.

At it’s most fundamental level we still don’t know what electricity is but we don’t need to know that much detail. We only need to know the basics to get started.

What are the basics, the foundation to build upon?

Definition of a volt.
One volt is the potential difference between two points that will impart one joule of energy per coulomb of charge that passes through it. The pioneers thought of potential difference as tension.

Definition of an amp.
One ampere is equal to 1 coulomb or 6.241509074×1018 electrons worth of charge moving past a point in one second. So what’s a coulomb?  6.241509074×1018 electrons.

Those two definitions tell you what needs to be done. You have to bring charges (coulombs/electrons) into the system and raise the tension on those charges to move them past a point in the circuit at the rate required to obtain the amperage you want. Nothing more, nothing less.

Anything that aids that goal is worth investigation. Anything that does not, is noise.




Edit: corrected 1018 to 1018
« Last Edit: February 10, 2023, 04:31:53 PM by Cadman »

Dog-One

  • Hero Member
  • *****
  • Posts: 1019
Re: The basic requirements to obtain free electricity.
« Reply #1 on: February 10, 2023, 02:21:16 PM »
I can't disagree with this mission statement.

I will add, when you say volts and amps, how about we use a single term and
say power, where power relates to a time interval.  This interval can be long or
short, but must be defined and consistent whenever applied to a device
measurement.

For electrical devices, yes we need tension and flow of charge.  In my opinion,
I think we should focus on having two discrete sources, one of tension and
another of charge flow and come up with a means of mixing these two sources
in such a way where we get the combined benefit of each source to produce
an output that is greater than the sum of the two parts.  This output needs to
be able to supply each of the two source inputs while having excess to do
useful work as well as demonstrate self sustained operation.  How that is
accomplished is up to the researcher and likely has multiple avenues of
success.

DUT Relationships:
Pin1 --> Pout1
Pout1 < Pin1
Pin2 --> Pout2
Pout2 < Pin2
PDUTin --> PDUTout
PDUTin = Pout1 + Pout2
PDUTout > Pin1 + Pin2

Cadman

  • Sr. Member
  • ****
  • Posts: 409
Re: The basic requirements to obtain free electricity.
« Reply #2 on: February 10, 2023, 02:41:36 PM »

...
I will add, when you say volts and amps, how about we use a single term and
say power, ....


The only thing I have against that is it diverts the focus from the two distinct components of electricity, volts and coulombs, and lumps them into a third form. Each component is obtainable separately and it's important not to lose focus on this fact. Power and energy come after volts and coulombs are obtained.

I absolutely agree otherwise. Good input  :)

Edit: One more point I would like to make. Free electricity does not require self running or over unity. Worthy goals but not requirements.


stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: The basic requirements to obtain free electricity.
« Reply #3 on: February 10, 2023, 05:08:18 PM »
Free electricity does not require self running or over unity. Worthy goals but not requirements.
overunity doesn't exist.
self running exists if mechanism of powering the device even if it's not visible to the naked eye
uses energy conversion from one form to the other.
or we are dealing with energy transfer.

the example of energy conversion is Lithuania experiment.
https://overunity.com/19335/lithuania-ou-experiment-wesleys-theory-schematic-explanationstep-by-step/msg573325/#msg573325
https://overunity.com/19358/caduceus-coil-building-and-testing/15/The
likelyhood   determined during  a test points at energy conversion due to transmutation taking place in ferrite.
The example of energy transfer is Dr. James Corum  energy transfer from point A to point B.

Re: Wireless energy transfer experiments ,Builders board
« Reply #274 on: September 06, 2021, 11:12:16 PM »
- single wire energy transfer  is also sending energy in form of electromagnetic wave the interface between wire and dielectric insulation of the wire .
https://www.youtube.com/watch?v=dewI_VVMb38



commercial application for energy transfer is strip waveguide or slab waveguide.
https://www.comsol.com/model/dielectric-slab-waveguide-14709

 here is another look at  Nikola Tesla using Earth to transmit energy .
 you need to look at in  not from the perspective of  solid knowledge, but from the perspective
 of interest of selling the book by the author of this video, who is likely the writer of the book.
https://www.youtube.com/watch?v=D3GSHRgV9SM

Energy transfer from point A to point B in Near Field  is here
https://www.youtube.com/watch?v=ndX9F8LNjNM
Explanation what is: Near Field is here
https://www.youtube.com/watch?v=WoSsVEXzAck


as an entertainment you may also look at not related to this subject but related to Nikola Tesla  video
On the likely same guy trying to make money on something
https://www.youtube.com/watch?v=8HHP2aZfp5I Tesla's Magnifying Transmitter - First Ever Full Explanation


Wesley

Cadman

  • Sr. Member
  • ****
  • Posts: 409
Re: The basic requirements to obtain free electricity.
« Reply #4 on: February 10, 2023, 05:27:12 PM »
overunity doesn't exist.
self running exists if mechanism of powering the device even if it's not visible to the naked eye
uses energy conversion from one form to the other.
or we are dealing with energy transfer.
....
Wesley

Wesly,
You are absolutely right. OU does not exist because humans cannot create something from nothing.
And that does not mean self running along with a usable electrical output is not possible.



forest

  • Hero Member
  • *****
  • Posts: 4076
Re: The basic requirements to obtain free electricity.
« Reply #5 on: February 10, 2023, 06:58:44 PM »
Tesla coil + antenna + modulation of charges + induction = free electricity


typedusud

  • Newbie
  • *
  • Posts: 4
Re: The basic requirements to obtain free electricity.
« Reply #7 on: October 27, 2023, 09:47:35 PM »
A field effect transistor is an advance transistor, use to amplify energy and oscilate ( replace efficiency the spark gap used by N tesla)
A ferrite is a load to modulate energy
A cold coil, or caducee coil is an energy generator like the ring of the eart that are in clockwise and counter-clockwise among them
A resistor for determination of energy production, the smaller resistor, the bigger energy is produce
A capacitor for resonnating the system
An organic accumulator for harvest electricity , tesla use the earth itself
A lamp to generate the electric flow .
The coil must be cooling because he become very hot at 8 ampere, can be multiple coil or a supraconductor coil.
With 100 watts amplifier the output energy is hight enought to replace all earth power installation, like Tesla said.
The cooling installation cannot be done by yourself, tesla use a huge dome for it.


It is like the tesla tower, energy unlimited but you know the story...


And if you use battery, with a "free energy system" the will be dead in fews hours if you
dosn't keep them in good conditions. It that why there is no free energy, but only efficients systems

    If you run a car WITHOUT amortissors ( coil, spring), you loose energy. So "Free energy systems" use coils ( spibg) to smooth the load in his electric "road".

The true problem is not technical, it is consciousness and spiritual.


Ufopolitics

  • Hero Member
  • *****
  • Posts: 575
Re: The basic requirements to obtain free electricity.
« Reply #8 on: October 30, 2023, 02:21:23 PM »
What is it we really want here? Isn’t it free electricity? Something with substantial volts and amps?

Start by paying attention to the pioneers. The experimenters, scientists and physicists in the past who ‘discovered’ and worked with electricity. There were no laws or definitions or even terminology for it back then. It was more like ‘Hey, I have an idea. Let’s try it and see what happens.’ They invented the terminology to describe volts, amps, and magnetic fields. They didn’t know what it was but they figured out how to work with it and use it using their own terminology.

At it’s most fundamental level we still don’t know what electricity is but we don’t need to know that much detail. We only need to know the basics to get started.

What are the basics, the foundation to build upon?

Definition of a volt.
One volt is the potential difference between two points that will impart one joule of energy per coulomb of charge that passes through it. The pioneers thought of potential difference as tension.

Definition of an amp.
One ampere is equal to 1 coulomb or 6.241509074×1018 electrons worth of charge moving past a point in one second. So what’s a coulomb?  6.241509074×1018 electrons.

Those two definitions tell you what needs to be done. You have to bring charges (coulombs/electrons) into the system and raise the tension on those charges to move them past a point in the circuit at the rate required to obtain the amperage you want. Nothing more, nothing less.

Anything that aids that goal is worth investigation. Anything that does not, is noise.

Edit: corrected 1018 to 1018

Hello Cadman,

I clearly understand what you are doing...trying to go to the "origins", the primitive discoveries of Electricity (by now, all forgotten)...like a "restart" from scratch.

Unfortunately, I do not think "this is all" we need, like you mention on last paragraph and bold out sentence by me.

Volts and Amps I always have look at it like this paradox, where Voltage are the Highways and Amps are all vehicles traveling and speeding up through...
Where many other factors, parameters (also very important, and can not be disregarded) that regulate such traffic of Electrons...for example: Resistance.

Imagine a constant speed through a 4 way highway of a "population of vehicles",(electrons), moving through...and all the sudden two of this ways are blocked, maybe an accident...so a restriction (resistance) comes in play...all vehicles most reduce its speed, and concentrate even more on only two roads, or half the normal Voltage was allowing...So, the "Amperage" (Population) had reduced in aprox 50% due to the traffic jammed which generated a higher resistance of flow...Amperage reduced do to a higher resistance.

However, I honestly believe the main reason why we have not reached yet, and here I would not even mention "overunity" or "free energy" not to bring unwanted responses...I would just say...a cleaner, non fuel dependent (of any type, including hydrogen plus non nuclear reaction methods) is basically due, not to not knowing what exactly electricity is...BUT, what is a Magnetic Field?.

For hundred of years, we have been totally ignorant of what is exactly a Magnetic Field...and so far, it is the only "agent" which we all have been depending upon, to obtain, generate, Electricity...except Nuclear Fusion or Chemical batteries.

Regards

Ufopolitics

forest

  • Hero Member
  • *****
  • Posts: 4076
Re: The basic requirements to obtain free electricity.
« Reply #9 on: October 30, 2023, 05:59:56 PM »
All we need is to find source of energy like ambient heat for heatpumps and the method of conversion to usable power.

dxer_87

  • Full Member
  • ***
  • Posts: 184
Re: The basic requirements to obtain free electricity.
« Reply #10 on: October 31, 2023, 02:41:03 AM »
Maybe using RC elements, transformer and antenna and grounding? Once I did something like this: I've connected 1mohm resistor with 1nF ceramic in parallel. Then I made 50 of such and connected all in series. From one side I put gnd and from the other a leg of secondary winding of 100W transformer. To other leg I connected to antenna and another series like these consisting of 1kohm and 100nF ceramic. Ended from the other side to big piece of tin. Somehow i was able that the transformer gives on output 220V 200W. I put a lighbulb and I had bright light. Then i made an application with power transistor to this piece of tin to get more power. This is just one example of how popular elements one can use to a chieve simple solid state-ant-gnd system... Maybe someone can replicate this. Sounds cheap...

dxer_87

  • Full Member
  • ***
  • Posts: 184
Re: The basic requirements to obtain free electricity.
« Reply #11 on: October 31, 2023, 11:42:35 PM »
I am also pondering of something that I was connecting in the past. It is near to replicate the phase, but it is something different. It utilizes Kapanadze/Tesla Resonance. But the fuel can be even AC grid line. I was dividing windings into three: Injection Coil (50Hz Live go through), Fuel Coil (Between Source/Mass and Earth ) and Exhaust Coil simply as an output. Sometimes I was connecting fuel to exhaust via some application that resistor was minimum. Also multivibrators out of two-three transistors were good. This can be expanded now if we can hack the transistor to work with full power (2,5M ohm resistors and these little caps). Hope this may help You on your way if You want to succeed with Kapanadze Magic Coil.


dxer_87

  • Full Member
  • ***
  • Posts: 184
Re: The basic requirements to obtain free electricity.
« Reply #12 on: November 01, 2023, 04:47:20 AM »
To method two I recommend using third winding with multivibrator consisting of two transistors and application. By changing the R value (pots) you regulate the frequency, as to point the magic coil goes into resonance.